INSTRUCTION MANUAL I Altura Outdoor Adirondack Chair SKU: OP6001
NOTICE Do not overtighten bolts. (Insert all bolts before tighten bolts.) • Please do not exceed the weight limitations of this item. • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws and nuts before use. • Reconfirm that all bolts, screws, and nuts are secure every 90 days. • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. • Be aware that some parts are heavy and have sharp edges.
PARTS D E LEFT CHAIR ARM 1 PC G F RIGHT CHAIR LEG 1 PC H BACK RAIL LEFT CHAIR LEG 1 PC FRONT RAIL 1 PC 1 PC PRODUCT ASSEMBLY - OVERALL VIEW 1 Look at following overall view of this chair and learn the exact position of each parts to be assembled.
PRODUCT ASSEMBLY Attach part F Left Chair Leg to part A Chair Seat with 3 pcs of part 2 bolt, part 6 washer and part 5 Nut. Do the same to part E Right Chair Leg and part A Chair Seat. 1 Attach part H Front Rail to two Chair legs with 2 pcs of part 3 Bolt. Do not tighten bolts too much at this stage. 5 6 2 2 A F 2 H E F 3 Attach part C Right Chair Arm to part E Right Chair Leg with 1pc of part 4 bolt, part 6 washer and part 5 Nut.
PRODUCT ASSEMBLY Attach part B Chair Backrest to part C Right Chair Arm and part D Left Chair Arm with 2 pcs of part 1 Bolt. 3 Attach part B Chair Backrest to part A Chair Seat with 2 pcs of part 2 Bolt. D 1 B C A 2 Attach part G Back Rail between rear legs of Part A Chair Seat with 2 pcs of part 3 bolt. 4 Check and tighten all the bolts and screws again and finish the assembly.