Outdoor Folding Adirondack Seashell Chair SKU: OP6010 V 1.
NOTICE • TOOLS REQUIRED LBS ALLEN WRENCH (PROVIDED) SCREWDRIVER (PROVIDED) WRENCH (PROVIDED) HARDWARE 1 M4 x 40mm SCREW 2 M6 x 50mm BOLT 2 PCS 8 PCS 6 3 7 WASHER 16 PCS M6 x 55mm BOLT 4 2 PCS 4 PCS 8 M6 NUT ALLEN WRENCH 1 PC 6 PCS 5 M6 x 60mm BOLT 9 M6 x 90mm BOLT 2 PCS SCREWDRIVER 10 1 PC WRENCH 1 PC PARTS A CHAIR BACKREST 1 PC B CHAIR SEAT 1 PC C RIGHT CHAIR ARM 1 PC Page 1 of 6
PARTS D LEFT CHAIR ARM E 1 PC G LOCKING BLOCK F RIGHT CHAIR LEG LEFT CHAIR LEG 1 PC H 1 PC I J REAR SLAT 2 PCS FRONT BRACE 1 PC 1 PC PRODUCT ASSEMBLY - OVERALL VIEW Look at the overall view of this chair and learn the exact position of each part to be assembled.
PRODUCT ASSEMBLY 1 Place part H Rear Slat onto part B Chair Seat as below, attach the rear slat with 4 pcs of hardware 1 Screw. Attention: Keep countersink holes facing upward and put screws in. 1 H 1 1 1 B 2 Place part E Right Chair Leg to combined part ( B + H ) Chair Seat with 3 sets of hardware 4 Bolt, hardware 6 Washer (2 pcs) and hardware 7 Nut, Attention: 1 pc of Hardware 6 Washer is assembled between seat and leg. Do the same to attach part F Left Chair Leg to combined part ( B + H ).
Bolt, PRODUCT ASSEMBLY 3 Attach part J Front Brace to part E and part F Chair Legs with 4 pcs of hardware 1 Screw. F B 1 J E 4 1 1 1 Attach part D Left Chair Arm to part F Left Chair Leg with 1 set of hardware 3 Bolt, hardware 6 Washer (2 pcs) and hardware 7 Nut as below. Do the same to attach part C Right Chair Arm to part E Right Chair Leg.
PRODUCT ASSEMBLY 5 Attach 2 pcs of part G Locking block to part B Chair Seat with 2 sets of hardware 3 Bolt, hardware 6 Washer (2 pcs) and hardware 7 Nut. G 3 B 7 6 7 6 3 6 3 G 6 7 6 6 B G Place part A Chair Backrest onto part B Chair Seat as below. Attach the Chair Backrest to part D and part C Chair Arms with 2 pcs of hardware 5 Bolt as well as 2 pcs of hardware 6 Washer.
PRODUCT ASSEMBLY 7 Attach part G Locking block to the bottom brace of part A Chair Backrest with 2 pcs of hardware 2 Bolt and hardware 6 Washer. Tighten all bolts again to ensure the steady of this chair. Attention: Push the backrest forward and meantime pull the locking block backward to fold this chair.
