INSTRUCTION MANUAL 6-Seating Modern Sectional Set with Storage Ottoman SKU: P155
NOTICE Do not overtighten screws. (Insert all screws before tighten screws.) • Please do not exceed the weight limitations of this item. • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws and nuts before use. • Reconfirm that all bolts, screws, and nuts are secure every 90 days. • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. • Be aware that some parts are heavy and have sharp edges.
PARTS D CORNER SOFA TOP E 1 PC G BACK CUSHION CORNER SOFA TOP H CORNER TOP 1 PC CORNER LEFT SIDE K CORNER BACKREST I CORNER LEFT SIDE 1 PC CORNER FRONT PANEL 1 PC L CORNER F-PANEL 1 PC 1 PC N SEAT CUSHION 5 PCS 1 PC 1 PC M F 1 PC 5 PCS J CORNER BACKREST I O TABLE BACK PANEL 1 PC Page 2 of 12
PARTS P TABLE TOP Q RIGHT TABLE SIDE T TABLE COVER 1 PC LEFT TABLE SIDE 1 PC 1 PC V R 1 PC 1 PC S TABLE BASE W TABLE FRONT PANEL 1 PC I U SIDE CUSHION 1 PC GLASS TOP 1 PC Page 3 of 12
PRODUCT ASSEMBLY - CORNER SEAT 1 Attach part K Corner Backrest to part H Corner Left Side with 2 PCS of part 1 washer and part 2 bolt. Do not tighten screws too much at this stage. 1 2 K H 1 2 K 2 Attach part B Corner Side Panel and part I Front Panel to part J Corner Sofa Top with 5 PCS of part 1 washer and part 2 bolt.
PRODUCT ASSEMBLY - CORNER SEAT 3 Attach the assembled part (B+I+J) to part H Corner Left Side and part K Corner Backrest with 7 PCS of part 1 washer and part 2 bolt. Tighten all the bolts again to ensure this corner seat is stable enough to use. 2 2 1 1 I B 2 2 2 1 1 J 1 2 1 2 1 H K 4 Place part F Seat Cushion and part G Back Cushions onto the Corner Seat.. The assembly of fitst corner seat finishes.
PRODUCT ASSEMBLY - CORNER SEAT 1 Attach part A Corner Right side to part E Corner Backrest with 2 PCS of part 1 washer and part 2 bolt. Do not tighten screws too much at this stage. 1 A 1 2 2 E 2 Attach part B Corner Side Panel and part C Front Panel to part D Corner Sofa Top as below, with 5 PCS of part 1 washer and part 2 bolt.
PRODUCT ASSEMBLY - CORNER SEAT 3 Attach the assembled part (B+C+D) to part A Corner Right Side and part E Corner Backrest with 7 PCS of part 1 washer and part 2 bolt. 2 1 C 2 1 1 2 2 D B 2 2 1 2 1 1 1 A E 4 Place part F Seat Cushion and part G Back Cushions onto the Corner Seat.. The assembly of second corner seat finish.
PRODUCT ASSEMBLY - CORNER SEAT III 1 Attach the part N Corner Left Side to part A Corner Right Side with 2 PCS of part 1 washer and part 2 bolt. 1 A 1 2 2 N 2 Attach the part B Corner Side Panel and part L Corner F-Panel to part M Corner Top with 3 PCS of part 1 washer and part 2 bolt.
PRODUCT ASSEMBLY - CORNER SEAT III 3 Attach the assebled part (B+L+M) to part A Corner Right Side and part N Corner Left Side with 6 PCS of part 1 washer and part 2 bolt. 2 1 1 1 B 2 2 A 2 2 1 1 L N 4 Place part F Seat Cushion, part G Back Cushions and part U Side Cushion onto the Corner Seat.. The assembly of single corner seat finishes.
PRODUCT ASSEMBLY - COFFEE TABLE 1 Attach part S Right Table Side to part P Table Top with 2 PCS of part 1 washer and part 2 bolt. Do not tighten screws too much at this stage. S 2 2 1 1 P 2 Attach part O Table Back Panel to part S Right Table Side and part P Tale Top with 2 PCS of part 1 washer and part 2 bolt.
PRODUCT ASSEMBLY - COFFEE TABLE 3 Attach part T Left Table Side to part P Table Top and part O Table Back Panel with 4 PCS of part 1 washer and part 2 bolt. 2 2 1 1 O T P 4 Attach part Q Table Base to part S Right Table Side and part T Left table side with 4 PCS of part 1 washer and part 2 bolt.
PRODUCT ASSEMBLY - COFFEE TAB LE 5 Attach part R Table Front Panel to part T Left Table Side and part S Right Table Side with 2 PCS of part 1 washer, part 2 bolt and part 3 nut. 3 S 2 T 2 1 6 2 1 1 R Place part W Glass Top or part V Table cover onto part P Table Top. The Assembly of Coffee Table finishes.
