Owners manual

ManualsBrandsWestin ManualsAutomotive28-71090 R7 Boards Fits 15-19 F-150 F-250 Super Duty F-350 Super Duty

Westin Automotive Products, Inc.

320 W. Covina Blvd

San Dimas, Ca. 91773

Thank you for choosing Westin products

for additional installation assistance please call

Customer Service (800) 793-7846

www.westinautomotive.com

P.N.: 75-1128-RevB

ECO #: W16-0090

DATE: 09/8/16

INSTALLATION INSTRUCTIONS

AUTOMOTIVE PRODUCTS,

R7 STEP BOARD

APPLICATION:

2015-2017 Ford F150 Super Cab / Super Crew

2017 Ford F250/350 Super Cab / Crew Cab

PART NUMBER:

28-71080, 28-71085, 28-71090, 28-71095

ITEM 1 ITEM 16 ITEM 3 ITEM 2 ITEM 4

ITEM QUANTITY DESCRIPTION TOOLS NEEDED

1 2 STEP BAR ASSEMBLY RATCHET

2 2 / 4 * MOUNTING BRACKET A TORQUE WRENCH

3 2 MOUNTING BRACKET B 10MM SOCKET

4 4 / 6* UNIVERSAL BRACKET 13MM SOCKET

5 16 / 24* M8 SPLIT LOCK WASHER (YELLOW ZINC)

6 16 / 24* M8 LARGE FLAT WASHER (YELLOW ZINC)

7 16 /24* M8 HEX NUT (YELLOW ZINC)

8 8 / 12* M6 HEX HEAD CAP SCREW (YELLOW ZINC)

9 16 / 24* M6 FLAT WASHER (YELLOW ZINC)

10 8 /12* M6 NYLON LOCK NUT (YELLOW ZINC)

11 4 / 6* M8 ROUND HEAD SQUARE NECK BOLT (BLACK ZINC)

12 8 / 12* M8 HEX HEAD CAP SCREW (BLACK ZINC) SEMS HARDWARE

13 8 / 12* M8 SMALL FLAT WASHER (BLACK ZINC) SEMS HARDWARE

14 8 / 12* M8 SPLIT LOCK WASHER (BLACK ZINC) SEMS HARDWARE

15 12 / 18* M8 PLASTIC RETAINER

16 4 / 6* PLASTIC BRACKET COVER

* SUPER CAB / SUPER CREW. NOTE: SUPER CAB HAS LESS HARDWARE AND BRACKETS.

ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING

CONTENT

Summary of content (5 pages)

PAGE 1
INSTALLATION INSTRUCTIONS R7 STEP BOARD AUTOMOTIVE PRODUCTS, APPLICATION: 2015-2017 Ford F150 Super Cab / Super Crew 2017 Ford F250/350 Super Cab / Crew Cab PART NUMBER: 28-71080, 28-71085, 28-71090, 28-71095 CONTENT ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 2 STEP BAR ASSEMBLY RATCHET 2 2/4* MOUNTING BRACKET A TORQUE WRENCH 3 2 MOUNTING BRACKET B 10MM SOCKET 4 4 / 6* UNIVERSAL BRACKET 13MM SOCKET 5 16 / 24* M8 SPLIT LOCK WASHER (YELLOW ZINC) 6 16 / 24* M8 LARGE FLAT WASHER (YELLO
PAGE 2
PROCEDURE 1. Remove contents from box, verify if all parts listed are present and free from damage. Carefully read and understand all instructions before attempting installation. Failure to identify damage before installation could lead to a rejection of any claim. 1. Start installation on driver’s side. On the rocker panel find locations of factory studs. In each location there should be 3 studs. (Note: Super Cab has two locations and Super Crew has three locations.) See Figure 1. 2.
PAGE 3
6. Locate (1) Plastic Bracket Cover (Item 16) and loosely secure it to the (6) brackets using the provided hardware: (2) M6 hex head bolt, (4) M6 flat washer, and (2) M6 nylon lock nut. Repeat for every bracket. See Figure 5. 7. Loosely install the Step Bar Assembly (Item 1) to the previously install mounting brackets with the supplied M8 hardware (Items 12-14). See Figure 6. 8.
PAGE 4
INSTALLATION COMPLETE Care Instructions    REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES. STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES. GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER. Westin Automotive Products, Inc. 320 W. Covina Blvd San Dimas, Ca. 91773 P.N.
PAGE 5
AUTOMOTIVE PRODUCTS, INC. WARNING Failure to follow these instructions could lead to death, personal injury, and / or property damage. FASTENERS: All Westin supplied fasteners must be utilized and installed in accordance with the installation instructions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION AND SAFETY. DRILLING: Most Westin products do not require drilling for installation.