Instructions / Assembly

1. CAUTIONS:
• Turn power off before inspection, installation, or removal.
• Risk of electric shock - Do not use where exposed to water or weather.
• Suitable for Damp Locations - The lamp is suitable for use in wet locations when used in an
outdoor rated xture.
• Do not open – no user serviceable parts inside.
• Not for use with dimmers.
• This device is not intended for use with emergency exit xtures or emergency exit lights.
• This device complies with Part 15 of the FCC rules and has been tested and found to comply
with the limits for a Class B digital device. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. Any changes or
modications not expressly approved by the manufacturer could void the user's authority to
operate the equipment.
2. SAFETY CABLE INSTRUCTION:
INSTALLATION AND SAFETY INSTRUCTIONS
Step 1: Carefully squeeze the loop end of
the safety cable to allow the loop to
easily t through safety cable slot.
Step 2: Insert the safety cable through the
safety cable slot on the side of the plastic
base.
Step 3: Pull out the safety cable from the
slot by using included tool to carefully
grasp and help pull it out of slot.
ESF-WH-018
1
Model
Power
Input Voltage
Base
05167
100W
120-277V
E39 Mogul
Step 4: Push the safety cable's loop
completely through safety cable slot and
insert hook end of cable through the
loop.
Step 5: Pull the hook end of the safety
cable completely through the cable's loop.
Step 6: Install lamp in the xture's socket.
Buckle the safety cable to the xture and
install the lamp.