Technical Literature

ManualsBrandsWestinghouse ManualsHeat PumpWestinghouse 14 SEER, 8.0 HSPF Q6SE Packaged

Q6SE-14 SEER, 8.0 HSPF

2 - 5 Ton Units

Cooling: 23,000 to 58,000 Btuh

Heating: 22,800 to 59,000 Btuh

Q6SE Series

Single Packaged Heat Pump,

Single Phase

The Q6 Series single packaged heat pumps are high

efﬁciency self contained cooling and heating units that

can be installed on a roof or on a slab. The convertible

unit design makes installations simple in all applications.

Units are ETL and ETLc listed.

FEATURES and BENEFITS

TECHNICAL

SPECIFICATIONS

• Copeland Compressor: State of the art scroll compressor

is standard equipment.

• Quiet Operation and Low Vibration: Swept-wing fan

blade combined with custom Venturi condenser fan.

• Wire guard coated with Earth Friendly Epoxy and

plastic mesh hail guard: A guard that will never rust

and protects the units coil from being damaged.

• Copper Tube / Aluminum Fin Coils: Both indoor and

outdoor coils are designed to optimize heat transfer,

minimize size and cost, and increase durability and

reliability.

• Designed using Galvanized Steel: with a polyester

urethane coat ﬁnish. The 950 hour salt spray ﬁnish is 1.5

mil thick and resists corrosion 50% better than comparable

units.

• Permanently Lubricated Condenser Motor: A heavy

duty PSC motor for long lasting reliability and quiet

operation. Requires no maintenance and is completely

protected from rain and snow.

• Thermostatic Expansion Valves: Factory installed

externally equalized thermostatic expansion valves

provides precise refrigerant control under varying load

conditions.

• Hi Pressure Switch: Ensures long compressor life.

• Externally Accessible Service Ports: Quick access to

refrigeration system.

• Liquid Line Filter Driers: Factory installed at a convenient

location for service.

• Suction Accumulator: Protection from liquid ﬂood back

and future compressor failures.

• Low voltage Transformer: Includes 3 Amp fuse to protect

low voltage circuit.

• Corrosion-Resistant Drain Pan: Quickly drains away

evaporator condensate.

• Energy Efﬁcient: Brushless DC (ECM) Blower Motor.

• Demand Defrost Standard: Provides additional energy

savings in heating by defrosting only when necessary.

• Five Minute Restart Time Delay: When the unit shuts

down, a 5 minute delay keeps the unit from restarting,

eliminating the highest cause for compressor failure.

• Heavy-Gauge, Full Perimeter Base Rails: Facilitates

forklift handling and curb mounting.

• Convertible Air Delivery: Horizontal or downﬂow to

accommodate rooftop or horizontal applications.

• Easy Compressor and Control Access: Designed to

make servicing easier for the contractor, access panels

are provided to all controls and the compressor from the

side of the unit.

• Easy access: to the evaporator coil for cleaning and

general maintenance.

• Removable Top Grille Assembly: Allows ease of service

to the fan motor.

• Duct Flanges: reduce installation costs.

• Optional Electric Heat: Field installed 5 – 20 KW.

• Proven, Industry Standard Components: Easier service

and availability.

Summary of content (12 pages)

PAGE 1
TECHNICAL SPECIFICATIONS Q6SE Series Single Packaged Heat Pump, Single Phase Q6SE-14 SEER, 8.0 HSPF 2 - 5 Ton Units Cooling: 23,000 to 58,000 Btuh Heating: 22,800 to 59,000 Btuh The Q6 Series single packaged heat pumps are high efficiency self contained cooling and heating units that can be installed on a roof or on a slab. The convertible unit design makes installations simple in all applications. Units are ETL and ETLc listed.
PAGE 2
MODEL IDENTIFICATION CODE Q 6 S E - X 24 Heat Pump Packaged Unit K Electrical Code K = 208/230-60-1 Nominal Capacity x 1000 Btu Series E = 14 SEER R-410A TXV Square Duct dimensions (in inches) 24.9 .75 NPT Female Drain Connector DOWNFLOW SUPPLY DUCT OPENING 47.5 CG 13.5 16 16 13.5 B 13.3 12 12 23.
PAGE 3
DIMENSIONS (Continued) 1.8 1.75 dia. Power Entry (Capped) 1.25 dia. Power Entry 0.88 dia. Control Wiring Entry 30.0 27.2 23.6 4.00 Side View 4.0 5.0 SUPPLY C CONDENSING COIL RETURN 13.5 16.0 8 16.0 14.7 13.5 13.45 11.75 22.75 55.
PAGE 4
Specifications Q6SE Model Number X24 X30 X36 X42 X48 X60 22,000 26,800 33,200 42,000 45,500 59,000 8.0 8.0 8.0 8.0 8.0 8.0 23,000 28,000 34,800 42,000 48,000 58,500 Efficiency-Seer 14.0 14.0 14.0 14.0 14.0 14.0 EER (Btuh/watt) 11.0 11.0 11.0 11.0 11.0 11.0 1 1 1 1 1 1 187-253 187-253 187-253 187-253 187-253 187-253 Min. Circuit Ampacity 22.7 24.4 28.5 32.9 37.2 43.5 Field Wire Size - AWG 10 10 10 8 8 6 19.1 20.5 23.9 27.4 31.2 36.
PAGE 5
0 5 8 10 15 15(3cir) 0 5 8 10 15 15(3cir) 0 5 8 10 15 15(3cir) 0 5 8 10 15 15(3cir) 20 20(3cir) 0 5 8 10 15 15(3cir) 20 20(3cir) 0 5 8 10 15 15(3cir) 20 20(3cir) Heater kw 22.7 47.7 62.3 72.7 97.7 97.7 24.4 49.4 64 74.4 99.4 99.4 28.5 53.5 68.1 78.5 103.5 103.5 32.9 57.9 72.5 82.9 107.9 107.9 132.9 132.9 37.2 62.2 76.8 87.2 112.2 112.2 137.2 137.2 43.5 68.5 83.1 93.5 118.5 118.5 143.5 143.
PAGE 6
BLOWER PERFORMANCE Model number Q6SE X24 X30 External Static Pressure Drop - inches water column 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 * Tap T1 823 38.39 784 40.30 712 44.37 646 48.91 580 54.47 510 61.95 436 72.46 ** Tap T2 969 32.60 924 34.19 866 36.48 800 39.49 717 44.06 652 48.46 591 53.46 522 60.52 Tap T3 1068 29.58 1010 31.28 947 33.36 906 34.87 814 38.81 743 42.52 674 46.88 617 51.21 Tap T4 1188 26.59 1142 27.67 1068 29.58 1022 30.91 954 33.12 861 36.69 803 39.
PAGE 7
HEATER APPLICATION MATRIX Model Number H3HK-005H-01C H3HK-008H-01C H3HK-010H-01C H3HK-015H-01C H3HK-020H-01C H3HK-015H-21C H3HK-020H-21C 917166C 917167C 917168C 917169C 917170C 917172C Q6SE-X24 X X(2) X(2) X(2) NA X 917173C NA Q6SE-X30 X X(2) X(2) X(2) NA X NA Q6SE-X36 X X(2) X(2) X(2) NA X NA Q6SE-X42 X X(2) X(2) X(3) X(3) X(1) X(1) Q6SE-X48 X(2) X(2) X(2) X(3) X(3) X(1) X(1) Q6SE-X60 X(2) X(2) X(2) X(3) X(3) X(1) X(1) NA = Not Applicable.
PAGE 8
Q6SE Accessories Description Part Number Roof Curb (8”) Roof Curb (14”) Roof Curb (18”) Roof Curb (24”) Supply/return transition, 16” Supply/return transition, 18” Concentric diffuser, flush, 16” Concentric diffuser, flush, 18” Concentric diffuser, step down 16” Concentric diffuser, step down 18” Manual Fresh Air Damper Motorized Fresh Air Damper Economizer, downflow w/filter modulating, enthalpy controlled Economizer, horizontal modulating, enthalpy controlled Power Exhaust for use with downflow economiz
PAGE 9
Expanded Ratings cooling Q6SE-X24K O.D.T CFM E.D.B. E.W.B. T.C. 65°F S.C. K.W. T.C. 75°F S.C. K.W. T.C. 95°F S.C. K.W. T.C. 24.8 27.4 29.9 25.5 25.9 28.5 31.0 26.5 28.2 30.7 33.2 28.8 21.5 19.1 15.1 18.3 23.6 21.2 17.2 20.4 25.5 23.1 19.1 22.3 1.84 1.84 1.84 1.84 1.88 1.88 1.88 1.88 1.93 1.93 1.93 1.93 23.0 25.5 28.0 23.6 24.1 26.6 29.1 24.7 26.4 28.9 31.4 27.0 20.4 18.0 13.9 17.2 22.5 20.1 16.1 19.3 24.4 22.0 18.0 21.2 1.84 1.84 1.84 1.84 1.88 1.88 1.88 1.88 1.93 1.93 1.93 1.93 21.1 23.
PAGE 10
Expanded Ratings Continued cooling Q6SE-X42K O.D.T CFM E.D.B. E.W.B. T.C. 65°F S.C. K.W. 45.2 47.7 54.5 44.2 48.8 51.3 58.0 47.7 46.6 49.2 55.9 45.6 39.1 32.2 25.0 32.0 41.6 34.7 27.5 34.5 41.4 34.5 27.3 34.3 2.45 2.42 2.39 2.42 2.54 2.51 2.48 2.51 2.63 2.60 2.57 2.60 O.D.T CFM E.D.B. E.W.B. T.C. 65°F S.C. 53.8 58.8 63.8 54.1 54.7 59.8 64.8 55.0 55.7 60.8 65.8 56.0 46.1 39.0 31.9 37.6 47.9 40.8 33.7 39.5 49.7 42.7 35.6 41.3 O.D.T CFM E.D.B. E.W.B. T.C. 65°F S.C. 53.6 45.4 37.3 43.8 55.5 47.
PAGE 11
Expanded Ratings HEATING Q6SE-X24K OUTDOOR TEMPERATURE (Deg. F) 10 17 30 40 47 60 70 SCFM IDT 60 10.1 1.9 1.42 12.2 2.3 1.45 16.4 3.0 1.50 20.0 3.6 1.54 22.7 4.0 1.56 23.8 4.2 1.57 28.0 4.8 1.61 700 70 9.1 1.6 1.66 11.2 1.9 1.69 15.4 2.6 1.74 19.0 3.1 1.78 21.7 3.5 1.81 22.9 3.7 1.82 27.0 4.2 1.86 80 8.2 1.2 1.91 10.2 1.5 1.93 14.5 2.1 1.98 18.1 2.6 2.02 20.7 3.0 2.05 21.9 3.2 2.06 26.1 3.7 2.10 60 10.3 2.0 1.40 12.3 2.4 1.43 16.6 3.1 1.48 20.2 3.7 1.52 22.
PAGE 12
HEATING Expanded Ratings Continued Q6SE-X42K OUTDOOR TEMPERATURE (Deg. F) SCFM 1250 1400 1550 IDT 10 17 30 40 47 60 70 MBH COP kW MBH COP kW MBH COP kW MBH COP kW MBH COP kW MBH COP kW MBH COP kW 60 20.2 2.4 2.37 25.0 2.8 2.52 33.6 3.4 2.81 39.9 3.7 3.03 44.1 3.9 3.18 51.6 4.2 3.47 57.1 4.3 3.69 70 17.7 1.9 2.69 22.6 2.3 2.84 31.1 2.9 3.13 37.4 3.3 3.35 41.6 3.5 3.50 49.1 3.8 3.79 54.6 3.9 4.01 80 15.3 1.4 3.00 20.1 1.8 3.