Technical Literature

• CopelandScrollCompressor: State of the art compressor is standard
equipment.
• Micro-ChannelCoils: Both indoor and outdoor all aluminum coils
are designed to optimize heat transfer, minimize size and cost, and
increase durability and reliability.
• Wireguardcoatedwithearthfriendlyepoxyandplasticmesh
hailguard: A guard that will never rust and protects the units coil
from being damaged.
• EasyCompressorandControlAccess: Designed to make servicing
easier for the contractor, access panels are provided to all controls
and the compressor from the side of the unit. Easy access to the
evaporator coil for cleaning and general maintenance.
• PermanentlyLubricatedCondenserMotor: A heavy duty PSC motor
for long lasting reliability and quiet operation. Requires no maintenance
and is completely protected from rain and snow.
• Thermostatic Expansion Valves: Factory installed externally
equalized thermostatic expansion valves provides precise refrigerant
control under varying load conditions.
• Hi/LowPressureSwitches: Ensure long compressor life.
• ExternallyAccessible,ServicePorts:Quick access to refrigeration
system.
• LiquidLineFilterDriers: Factory installed at a convenient location
for service.
• QuietOperationandLowVibration: Swept-wing fan blade combined
with custom Venturi condenser fan.
• Two-StageHeatOperation: Featuring a two stage gas valve, 2 speed
inducer motor, and 2 speed blower control.
• ChoiceofHeatingControl:Two stage thermostat or single stage
heating thermostat with control board timing of a 10 minute delay for
second stage of heat.
• Tubular primary heat exchanger: Heavy gauge aluminized steel
heat exchanger.
• StainlessSteelsecondaryheatexchanger: Assures a long life.
• 100%redandtested:All units and each component are tested on
the manufacturing line.
• 30secondblowerdelay: At start-up assures a warm duct temperature
at start-up. Adjustable blower off settings (60, 90, 120, and 180 seconds).
• 30secondpostpurge:Increases life of heat exchanger.
• HotSurfaceigniter:Innovative application of an appliance type igniter
with a 20 year history of reliability.
• SmartLite
®
ControlBoard: Provides extended life to igniters using
hot surface ignition technology. Programmed to learn the heat-up
characteristics of the igniter, then adapt the ignition time to the
characteristics of the furnace so the igniter is energized appropriately.
• LPConvertible:Simple burner orifice and regulator spring change
for ease of convertibility.
• DesignedusingGalvanizedSteel:With a polyester urethane coat
finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion
50% better than comparable units.
• Corrosion-Resistant Drain Pan: Quickly drains away evaporator
condensate.
• EmbossedBottomPan: Keeps blower component compartment dry.
• SmallerPanels,GreatFit andFinish,TotalSeal: Well-designed,
quality construction.
• OnePieceTopPan: With drip edge on top panels whisks away rainwater.
• LowVoltageTransformer:Includes 5 Amp fuse to protect low voltage
circuit.
• EnergyEfcientBrushlessDCBlowerMotor: ECM constant torque
in all models.
• HorizontalAirDelivery: To accommodate ground mount horizontal
applications.
• Heavy-Gauge,FullPerimeterBaseRails: Facilitates forklift handling
and curb mounting.
• RemovableTopGrilleAssembly:Allows ease of service to the fan motor.
• DuctFlanges: Reduce installation costs.
• Proven, Industry Standard Components: Easier service and
availability.
R8HESeriesRevA
95%AFUECondensingHeat
ExchangerofferingTwo-StageHeating
and14SEERSingle-StageCooling
withECMBlower
These single packaged gas/electrics are high efficiency
self-contained heating and cooling units that can be
installed at ground level on a slab. The unit design makes
installations simple in all applications. Units are ETL and
ETLc listed.
TECHNICAL
SPECIFICATIONS
FEATURESandBENEFITS
Click or scan with your
smart phone to view
a video with drain kit
instructions for rooftop
installations.
Single-Phase