TABLE OF CONTENTS I M P O R TA N T INFORMATION 2 2 HOW TO INSTALL THE STAND 4 3 PREFACE 5 4 SAFETY PRECAUTIONS 5 5 IN THE CARTON 7 6 FRONT/BACK CONNECTIONS OF LCD TV 8 7 8 9 TV INSTALLATI ON DRAWINGS REMOTE CONTROL Menu Operation Power Cord Connection 9 Antenna Connection 9 AV Connection 10 YPbPr (c omponent ) Connection 10 VGA ( PC ) Connection 11 COAX Connection 11 HDMI Connection 12 Service Port Function 12 Remote control instructions in TV mode 13 Remote control
IMPORTANT INFORMATION English The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is interded to aler the user to the presence of important operating and maintenance (servicing) instruction the literature accompanying the appliance.
IMPORTANT INFORMATION 10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11.Only use attachments / accessories specified by the manufacturer. 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. English 13.
HOW TO INSTALL THE STAND English Limit Base cover Fixed-ring base Hole spacing Rotating base fixed plate Screw holes Screws First, fix the base cover to the fixed-ring base; then, let the rotating base fixed plate align the three limit pillar; Last, fix it with the screws.
PREFACE 3. PREFACE Thank you for buying this TV! Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV be damaged, do not install it and contact your dealer. Check that you have all the accessories according to the model. English 4. SAFETY PRECAUTIONS Put the TV on a stable surface. Do not place any material on the TV.
SAFETY PRECAUTIONS English Keep the TV dry and away from humidity. Keep the TV away from heat sources . Unplug the TV before cleaning it. Do not use solvent or liquid to clean the TV. Only clean the TV with a soft and dry cloth. In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits , fire or other incidents. Unplug the TV during lightning storms or when unused for long periods of time.
IN THE CARTON 5. IN THE CARTON MU TE PO WE R DI SP LAY ASPECT English ME NU EX IT OK EN TE R SL EE P CC LCD TV SET SO UR CE FAV LIST MTS Remote Control 1.5V 1.
FRONT/BACK CONNECTIONS OF LCD TV 6. FRONT/BACK CONNECTIONS OF LCD TV Front View 4 English VOL+ VOL- 3 CH+ CH- 2 MENU 1 SOURCE 5 POWER 1. Press“SOURCE”to select the input source. 2. Press “MENU”to bring up the main menu on the screen. 3. Press“CH+”or “CH-”to scan through channels. 4. Press“VOL+”or “VOL-”to increase or decrease the volume. 5. Press“POWER” button to turn the TV on or off. 6. POWER INDICATOR: Shows amber in standby mode. Shows amber or blue when your TV is switched on. 7.
TV INSTALL ATION DRAWINGS 7. TV INSTALL ATION DRAWINGS Power Cord Connection English - Connect the power cord correctly as shown. - Press the POWER switch of your LCD TV to switch on the LCD TV. The power indicator on the front panel lights up in amber or blue. AC IN Antenna Connection To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection.
TV INSTALL ATION DRAWINGS AV Connection Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the set using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red. Select the AV input source using the SOURCE button on the remote control.
TV INSTALL ATION DRAWINGS VGA(PC) Connection TV Back 5 VGA Cable Audio Cable AUDIO RGB-PC OUTPUT COAX Connection Connect to Audio Amplifier device to the COAX output jack on the TV. TV Back 5 COAX Cable COAX the audio amplifier back Audio amplifier 11 English Connect the RGB output of the PC to the VGA(PC) jack on the set. Connect the AUDIO output of The PC to the PC AUDIO jack on the set . Select the RGB input source with using SOURCE button on the remote control.
TV INSTALL ATION DRAWINGS HDMI Connection HDMI plug which replaces the HDMI connection allows transfer of all audio/video/control signals through one cable only. These signals are transferred in digital. English TV Back 5 AC IN HDMI Cable DVD Back Service Port Function Service port: (For factory uses only.
REMOTE CONTROL 8 . REMOTE CONTROL Remote control instructions in TV mode English MUTE POWER POWER Turn the LCD TV ON or OFF. MUTE Press to mute the sound. Press again or press VOL+ to un-mute the TV. NUMBER BUTTONS Press 0-9 to directly change the TV channel. SOURCE Press SOURCE to display the OSD input source, press ▲▼to select an input source , and then press OK to confirm. DISPLAY - Press this button to enter a program number for multiple program channel such as 2-1,etc.
REMOTE CONTROL Remote control setup English 1. Open the cover. 2. Uses three A size batteries.When inserting the batteries, make sure correct polarities “+”and “-” . marks on the batteries line up correctly with compartment markings . 3. Replace the battery cover. To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, and as marked on the remote control. 2.
MENU OPERATION 9.Menu Operation SETUP WIZARD English Select Language Select Language Follow this guide to help you set up your TV. Use the Up and Down arrows on your remote control and select the Language you want to use for menus and message screens. MENU English Enter French Enter Spanish Enter :Return :Select Menu :Press to E xecute Time zone Time zone Use the left or right key to select on your time zone.
MENU OPERATION Channel Scanning AUTO CHANNEL SEARCH - Air English Now Searching... Please Wait Return Analog Channels Found: 0 Digital Channels Found: 0 0% SELECT INPUT SOURCE Source Select TV AV Press SOURCE button to display the input source list. YPbPr1 Press ▼/▲ button to select the input source you want to watch. YPbPr2 Press OK button to enter the selected source.
MENU OPERATION Press MENU button to display the MAIN OSD MENU. Press ◄/► button to select the MENU you want. Press OK button to enter the sub menu. Press ▼/▲ button to select the option and then press ◄/► to adjust the value in the sub menu. English You can press MENU button to go back to the upper menu or EXIT button to close the OSD.
MENU OPERATION Brightness Press ▼/▲ button to select Brightness, then press ◄/► button to adjust. Brightness 25 English Contrast Press ▼/▲ button to select Contrast, then press ◄/► button to adjust. Contrast 25 Color Color 27 Press ▼/▲ button to select Color, then press ◄/► button to adjust. Sharpness Sharpness 27 Press ▼/▲ button to select Sharpness, then press ◄/► button to adjust. Tint Tint 27 Press ▼/▲ button to select Tint, then press ◄/► button to adjust. Screen Settings 1.
MENU OPERATION Auto Wide Press ▼/▲button to select the item Auto Wide, then press ENTER button to adjust. It can set the picture to fit the screen automatically. When the Auto Wide is selected, the symbol will show as: Auto Wide Press ENTER when the Color Temperature item is highlighted. Then press ◄/► button to adjust. Available color temperature: Cool, Normal, Warm.
MENU OPERATION MPEG Noise Reduction Press ▼/▲ button to select the item MPEG Noise Reduction, then press ◄/► button to adjust. It can improve the quality of the pictures by reducing the block noise. Available MPEG Noise Reduction: Off, Low, Medium, High. MPEG Noise Reduction Off English SOUND MENU SOUND Sound Settings Surround Mode Analog Sound Stereo Digital Sound English Other Settings Equalizer Settings MENU :Return :Select Menu ENTER :Go to Next Menu Sound Settings 1.
MENU OPERATION Bass Press ▼/▲ button to select the item Bass, then press ◄/► button to adjust. Treble Press ▼/▲ button to select the item Treble, then press ◄/► button to adjust. English Balance Press ▼/▲ button to select the item Balance, then press ◄/► button to adjust. Treble 7 Bass 7 Balance 7 Surround Mode Press ▼/▲ button to select the item Surround Mode, then press OK button to adjust. It can set the picture to fit the screen automatically.
MENU OPERATION Other Settings OTHER SETTINGS English MENU AVL Off Sepeaker On Digital Audio Output Dolby Digital :Select Menu :Return :Enable/Disable AVL Press ▼/▲ button to select the item AVL, then press ◄/► button to select ON or OFF. Auto Volume Level can set the volume automatically adjust corresponding to the input audio. Speaker Press ▼/▲ button to select the item Speaker, then press ◄/► button to select ON or OFF. If set to Off, the speaker will be mute.
MENU OPERATION CHANNEL MENU Note: This menu is only shown when the input source is TV. CHANNEL English Channel List Favorite List Channel Setting Signal Type Air Auto Channel Search MENU :Return :Select Menu Enter :Go to Next Menu Channel List Press ▼/▲ button to select Channel List, then press OK button to scan the Channel List. If you select the option “In Channel List” On, the channel label will display in the list.
MENU OPERATION Channel Setting Press ▼/▲ button to select Manual Channel Setting, then press OK button to set the value in the sub menu. English CHANNEL SETTING No Channels Present Please Perform Channel Search First MENU :Return :Select Menu :Se lec t Cha nn el Signal Type Press ▼/▲ button to select Signal Type, then press ◄/► button to select the type you want to set. There are two selections: Air and Cable.
MENU OPERATION PARENTAL CONTROL PARENTAL CONTROL Lock Parental Control Lock Parental Control V-CHIP V-CHIP Change Password Change Password Pront Panel Lock Front Panel Lock Source Lock Source Lock :Return DIGITAL MENU :Enter password :Return DIGITAL English MENU PARENTAL CONTROL :Enter password Input password to enter,default password is‘‘0000’’. V-CHIP Press ▼/▲ button to select V-CHIP, then press OK button to adjust. A sub menu will appear as below.
MENU OPERATION Movie Rating Press ▼/▲ button to select Movie Rating, then press OK button to adjust. A sub menu will appear as below. Movie Rating English G PG PG-13 R NC-17 X :Select ENTER :Lock/Unlock Press ▼/▲ button to select Rating, then press OK button to lock. TV Rating Press ▼/▲ button to select TV Rating, then press OK button to adjust. A sub menu will appear as below.
MENU OPERATION French Rating G 8ans + 13ans + English 16ans + 18ans + MENU :Return :Select ENTER :Lock/Unlock The operation of CANADA V-CHIP is the same as the operation of US V-CHIP. Block UnRated Show Press ◄ / ► button to select Block UnRated Show, then press OK button to set the rating locked. Downloadable Rating Press ▼ / ▲ button to select Downloadable Rating, then press OK button to set the rating. If the DTV program doesn’t have this rating information, this option will be in gray.
MENU OPERATION Source Lock Press ▼/▲ button to select Source Lock, then press OK button to enter the sub menu. Press ▼/▲ button to select Source, then press OK button to set the Source Lock . You can’t enter the locked source if you set the Source lock.
MENU OPERATION Caption Display Press ▼/▲ button to select Caption Display, then press ◄/► button to select ON or OFF. Analog Caption Type English Press ▼/▲ button to select Analog Caption Type, then press ◄/► button to select the type. Available type: CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4. Digital Caption Type Press ▼/▲ button to select Digital Caption Type, then press ◄/► button to select the type. Available type: Service1~6.
MENU OPERATION Menu Language Press ▼/▲ button to select the item Menu Language, then press ◄/► button to adjust. Available Language: English, French, Spanish. Clock English Press ▼/▲ button to select the Clock, then press OK to edit. CLOCK Time Zone Alaska Auto Clock Off Setup Time 2009-10-21 20:00:00 Day Of Week :Select Menu Wed :Change Setting Time Zone Press ▼/▲ button to select Timer Zone, then press ◄/► button to set.
MENU OPERATION No Signal Power Off Press▼/▲ button to select No Signal Power Off, then press OK button to select it On or Off. When set it On and there is no signal input by 10 minutes, it will turns off the panel and the LED light turns amber. English No Operation Power Off Press ▼/▲ button to select No Operation Power Off, then press OK button to select it On or Off. When set it On and there is no operation input by 3 hours, it will turns off the panel and the LED light turns amber.
MENU OPERATION Picture Settings English 1.Press ENTER when the Picture Settings item is highlighted. Then you will go to the sub-menu as following. 2.Press ▼/▲ to select the desired menu item. Press ENTER to proceed if necessary. 3.Press◄/► to adjust the item to the desired level. 4.When you have changed the settings, you can exit from the menu by pressing MENU.
MENU OPERATION Screen Settings SCREEN SETTINGS Screen Size Standard Auto Wide MENU :Return :Select Menu :Change Setting Screen Size Press ▼/▲ button to select Screen Size, then press ◄/► button to adjust. Available Screen Size: Standard. Auto Wide Auto Wide item is invalid in PC source. PC Setting 1.Press ENTER when the PC Settings item is highlighted. Then you will go the sub-menu as following. 2.Press ▼/▲to select the desired menu item. Press ENTER to proceed if necessary . 3.
MENU OPERATION Auto Adjust Press ▼/▲ button to select Auto Adjust, then press OK button to start auto adjusting. Horizontal Position English Press ▼/▲ button to select Horizontal Position, then press ◄/► button to adjust. Horizontal Position 25 Vertical Position Press ▼/▲ button to select Vertical Position, then press◄/► button toadjust. Vertical Position 25 Clock Press ▼/▲ button to select Clock, then press ◄/► button to adjust.
TROUBLESHOOTING 10. Troubleshooting Please check if you can solve problems by troubleshooting yourself . No signal No color shades Stain on the screen Double or multiple display image English Troubleshooting Control Please check that all cables are correctly plugged in. Adjust the contrast, the color and the brightness. May be the result from a lighting signal from car, motor, neon light and other electrical devices or appliances.
SPECIFICATIONS 11. SPECIFICATIONS This manual is only for your reference, any change to the design and specification will not be advised.
SPECIFICATIONS 11. SPECIFICATIONS Ce manuel ne sert de référence, tout changement sur le design et les spécifications ne sera pas informé.