UW46T7HW
TABLE OF CONTENTS TABLE OF CONTENTS i English TABLE OF CONTENTS ................................................................. i DIGITAL TELEVISION TRANSITION NOTICE ............................ 1 ENERGY STAR DISCLAIMER ..................................................... 1 IMPORTANT INFORMATION....................................................... 2 Warnings .................................................................................. 2 NOTICES ................................................
TABLE OF CONTENTS English POWER CONNECTION ............................................................. 20 CONNECTING AC POWER................................................... 20 INITIAL SETUP ...................................................................... 20 ANTENNA OR COAXIAL CABLE CONNECTION SETUP .... 21 CABLE OR SATELLITE BOX CONNECTION SETUP .......... 24 OTHER INPUT SOURCE CONNECTION SETUP ................ 26 WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/ SATELLITE BOX......................
DIGITAL TELEVISION TRANSITION NOTICE DIGITAL TELEVISION TRANSITION NOTICE For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see www.DTV.gov. For information on the TV Converter program, and on government coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009. ENERGY STAR DISCLAIMER This Westinghouse product has earned the ENERGY STAR® for meeting U.S.
IMPORTANT INFORMATION IMPORTANT INFORMATION Warnings To reduce the risk of fire or electric shock: Do not expose this product to rain or moisture. • Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified service personnel. • The plug should be connected to a mains socket outlet with a protective earthing connection.
IMPORTANT INFORMATION NOTICES Important Notices Concerning Power Cord Selection The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it is necessary to replace the original cord set, or if there is no cord set enclosed.
IMPORTANT INFORMATION FCC COMPLIANCE STATEMENT English This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions.
IMPORTANT INFORMATION IMPORTANT SAFETY INSTRUCTIONS Make sure to note and follow all warnings and instructions marked on the LED TV. Observe the following safety instructions. Read these instructions. • Keep these instructions. • Read all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
IMPORTANT INFORMATION Circuit Overload Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock. Power Cord Protection English Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords for damage. Install the LED TV near a wall socket outlet where the power cord can be readily accessed.
IMPORTANT INFORMATION WARNINGS AND PRECAUTIONS Do not orient the LED TV towards direct sunlight to reduce glare. • If the LED TV will not be used for a long period of time, unplug the unit and remove the batteries from the remote control. • Avoid touching the display screen by hand or any object. • Never remove the rear cover. The LED TV interior contains high-voltage parts. You may be seriously injured if you touch them. • Always handle the LED TV with caution when moving it.
IMPORTANT INFORMATION ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding English If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges.
IMPORTANT INFORMATION CLEANING THE LED TV Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
PACKAGE CONTENTS PACKAGE CONTENTS Remote Control (with 2x AAA batteries) LED TV Base User Manual Power Cord Warranty Card AC Adapter Quick Connect Guide English 46” LED TV Unit Screws for Base 10 Screw for Base
CONTROL PANEL CONTROL PANEL English Item 1. Power Description Toggles the power on and off.
TERMINALS TERMINALS 1 A A UD IO IN VI DEO L IN R L OUT R English 2 3 4 5 6 7 8 9 10 11 12 Item Function Connects the AC to DC adapter from this outlet to a power 1. DC IN source 2. COAX OUT Connects to an external analog audio receiver Connects to an external AV device such as a VCR, DVD player, 3. HDMI1/2 set-top box, or game system. Connects to a computer or other device with a VGA or 4. VGA & Ypbpr IN Ypbpr output using a 15-pin VGA cable. 5.
REMOTE CONTROL REMOTE CONTROL 13
REMOTE CONTROL OPERATION REMOTE CONTROL OPERATION INSTALLING THE REMOTE CONTROL BATTERIES CAUTIONS: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to the (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to physical injury.
LED TV BASE LED TV BASE CAUTION: The LED TV unit may be too heavy for one person to lift. If this is the case, make sure to ask for assistance in handling the LED TV to prevent physical injury and/or damage to the unit. English INSTALLING THE LED TV BASE 1 Open the LED TV carton box. 2 Remove the LED TV base. 3 Remove the plastic bag. 4 Remove the two top carton stabilizers from the LED TV. 5 Remove the protective plastic covering the LED TV.
LED TV BASE REMOVING THE LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base. English 1 Turn off the LED TV and all connected devices. 2 Disconnect the power cord from the LED TV. 3 Disconnect all signal cables from the I/O port terminals. 4 Remove the M5 x 16 screw securing the base to the desk. 5 Lay the LED TV on a clear, flat, and stable surface.
ANTENNA CONNECTION ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION 75 ohm coaxial cable (round) 300 ohm twin-lead (flat) RF IN 300-75 ohm ADAPTER (Not supplied) Separate VHF/UHF Antenna VHF Antenna UHF Antenna Home Antenna terminal (75 ohm) 300 ohm twin-lead COMBINER (Not supplied) 300 ohm twin-lead IN OUT 75 ohm coaxial cable NOTE: The F-type connector should be finger-tightened only. When connecting the RF cable to the LED TV, do not tighten F-type connector with any tool.
EXTERNAL DEVICE CONNECTIONS • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys. EXTERNAL DEVICE CONNECTIONS IMPORTANT: • Turn off the LED TV first before connecting an external device to prevent any possible damage or physical injury.
EXTERNAL DEVICE CONNECTIONS The following diagram shows the external device connections. Power outlet AC to DC adapter Audio cable Audio amplifier Audio out RGB cable 3.
POWER CONNECTION POWER CONNECTION CONNECTING AC POWER IMPORTANT: The LED TV is designed to be powered via an AC adapter. Use ONLY the AC adapter included in the package. Turn off all connected devices before plugging the AC adapter into the power outlet. Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet. INITIAL SETUP Press on the control panel or on the remote control to turn on the LED TV. Select the desired language and select Yes to use the SetupWizard.
POWER CONNECTION ANTENNA OR COAXIAL CABLE CONNECTION SETUP Select Language Time Zone Use remote control to select your local time zone. Select “Next” and then press SELECT to continue. Press Go Back to return to the previous screen. Power On Mode Use remote control to select the power on mode. Select “Home” and then press SELECT to continue. Press Go Back to return to the previous screen.
POWER CONNECTION Select Channel Scan Type Use remote control to select the channel scan type. Press SELECT to continue. Press Go Back to return to the previous screen. English NOTE: Antenna users selecting to scan Overthe-Air ATSC channels need a Channel Access Code in order to perform a channel scan and receive broadcast signals. For Antenna [ATSC] only: Antenna [ATSC] Channel Access Select “Next” and then press SELECT to continue. Press Go Back to return to the previous screen.
POWER CONNECTION Channel Scan in progress The channel scan may take a while to complete. When the scan is complete, you will be able to watch your local TV programming.
POWER CONNECTION CABLE OR SATELLITE BOX CONNECTION SETUP Select Language English Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Press SELECT to continue. Press Go Back to return to the previous screen. Power On Mode Use remote control to select the power on mode. Press SELECT to continue. Press Go Back to return to the previous screen.
POWER CONNECTION Cable/Satellite Box Input Use remote control to select the input connected to the set top box. Press SELECT to continue. Press Go Back to return to the previous screen. English RF Warning Use the up and down arrows on your HDTV control panel or remote control to select. Select “Proceed” and then press SELECT to search the program. Press Go Back to return to the previous screen.
POWER CONNECTION OTHER INPUT SOURCE CONNECTION SETUP Select Language English Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Press SELECT to continue. Press Go Back to return to the previous screen. Power On Mode Use remote control to select the power on mode. Press SELECT to continue. Press Go Back to return to the previous screen.
POWER CONNECTION Select Input Source Use remote control to select the input source. Press SELECT to continue. Press Go Back to return to the previous screen.
POWER CONNECTION WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/ SATELLITE BOX Select Language English Use remote control to select the language to be used for menus and messages. Press SELECT to continue. Time Zone Use remote control to select your local time zone. Press SELECT to continue. Press Go Back to return to the previous screen. Power On Mode Use remote control to select the power on mode. Press SELECT to continue. Press Go Back to return to the previous screen.
POWER CONNECTION Let’s Get Connected Select Input Source Use the keys on your remote control to select the input source. Press SELECT to continue. 29 English Select “Click here to connect a Game, Blu-Ray, DVD, or other player.” and press SELECT on your remote control. Press SELECT to continue. Press Go Back to return to the previous screen.
BASIC OPERATIONS BASIC OPERATIONS URNING THE POWER ON AND OFF Turning on the power English Press on the control panel or on the remote control to turn on the LED TV. Turning off the power Press on the control panel or on the remote control to turn off the LED TV. The LED behavior will depend on the enabled Power settings. LED indicator Operation Turns from none to red. Turn the power on. Turns from red to none. Turn the power off.
BASIC OPERATIONS CHANGING CHANNELS Follow the instructions below to change channels. Using the Ch / Buttons Browse channels on English To browse through the available channels, press Ch the remote control or on the control panel. Using the Channel Keys Selecting channel To change to a certain channel, key in the channel number using the channel keys and press ENT.
BASIC OPERATIONS Using the Input Key Select source using Input Key 1 Press Input. 2 A list of supported video sources is displayed. English 3 Press 4 Press / to select the preferred source. to switch to the selected input source. ADJUSTING THE DISPLAY FORMAT The input source can sometimes affect the way images are displayed on-screen. You can adjust the display format to view the image properly. Format Options Press repeatedly to toggle the display format.
SETUP MENUS SETUP MENUS SETUP MENU OPERATION Use the setup menus to configure the various operational settings of the LED TV. Press on the remote control or MENU on the control panel to display the setup menu screen. Navigating the setup menu screen H D MI 1 SPD I F H D MI 2 U SB Use the buttons on the remote control or on the control panel to navigate through the menu screens.
SETUP MENUS PICTURE Use the Picture sub-menus to configure the display quality. Press on the remote control to display the setup menu screen then select Picture to display the Picture sub-menu. The following options are available: Picture Mode, Sound, Time, Setup, Lock, Channel. Picture Settings Adjust the picture quality including brightness, contrast, color, tint, sharpness.
SETUP MENUS Picture mode Use this sub-menu to select one of four preset view options optimized for different viewing conditions. The following options are available: • Energy Star: Select for power saving picture. • Retail: Select for enhanced picture contrast and sharpness • Movie: Select for a finely detailed picture. • User: Select for standard picture. Brightness Use Brightness to adjust the luminance level.
SETUP MENUS Color Use Color to adjust the color intensity. Adjusting Color English 1 Use the keys to select Color and press 2 Press the 3 Press . keys on the remote control to adjust the Color level. to save and exit the screen. Tint Use Hue to adjust the balance of the red, green, and blue colors in the display. Adjusting Tint The following options are available: 1 Use the keys to select Tint and press 2 Press the 3 Press . Keys on the remote control to adjust the Tint level.
SETUP MENUS Advanced Settings Press / to selet the display aspect ratio till the picture is fit onto the screen. The options are different according to different input source.
SETUP MENUS SOUND Use the Sound sub-menus to configure the sound quality. Press on the remote control to display the setup menu screen then select Sound to display the Sound sub-menu. The following options are available: Equalizer, MTS, Audio Language, Digital Audio Output, AVL, Surround HD. English Equalizer Use this sub-menu to select one of four preset audio options optimized for different sounding conditions. The following options are available: • Standard: Select for standard sound.
SETUP MENUS English MTS The following options are available: • Mono: Allows mono output (useful when stereo is noisy or inconsistent). • Stereo: Allows stereo sound for superior TV viewing experience. • SAP: Allows second audio program from the speakers while watching a scene in the original program. Adjusting MTS 1 Use the / 2 Press the 3 Press Keys to select MTS and press keys on the remote control to select the desired option. to save and exit the screen.
SETUP MENUS Time Use the Time sub-menus to configure the Time setting. Sleep Timer The following options are available: • Sleep timer: Off/ 5 min / 10 min / 15 min / 30 min / 60 min / 90 min / 120 min / 180 min/ 240 min/ . Adjusting Time 1 Use the / 2 Press the 3 Press Keys to select Time and press keys on the remote control to select the desired option. to save and exit the screen.
SETUP MENUS Daylight Saving Time 1 Use the 2 Press / Keys to select Daylight Saving Time and press repeatedly to check(enable) or uncheck(disable) Adjust for Daylight Saving Time. 3 Press to save and exit the screen. Time Format (12-hour/ 24-hour) Auto Clock (On/Off) If set it to On , the TV will sync the local clock according to the DTV broadcasting time automatically. Otherwise you can set the time manually. If set Auto Clock to Off, then you can set the time manually .
SETUP MENUS Sutup Use the Settings sub-menus to configure the LED TV operational setup and view the current firmware version. Press on the remote control to display the setup menu screen then select Setup to display the Settings sub-menu. The following options are available: Menu Language, OSD Timeout, Closed Caption, Other Settings, Restore Default. Menu Language Use Menu Language to select the language to display on the screen: English, French, or Spanish.
SETUP MENUS Adjusting OSD Timeout 1 Use the keys to select OSD Timeout and press. 2 Press the keys on the remote control to select 5 sec, 15 sec, 30 sec, or 45 sec, 60 sec. 3 Press to save and exit the screen. Closed Captions Use Closed Captions to configure the settings for closed captioning in TV programs. • CC Mode Display or hide the CC. • Analog CC Select from below closed-caption modes for analog programs. CC1,2,3,4: Displays corresponding caption channel of a analog program.
SETUP MENUS • Digital CC Applies only to digital channels with closed caption. Service1,2,3,4,5,6: These are different service data channels. • Option The following options are available: – Mode: Can be set to Default or Custom. – Font Style: Can be set to as Default, Font 1, Font 2, Font 3, Font 4, Font 5, Font 6, or Font 7, Font 0. – Font Size: Can be set to As Default, Small, Medium, or Large. – Font Edgy Style: Left Shadow, Right Shadow, Default, None, Raised, Depressed, Uniform.
SETUP MENUS Adjusting Closed Captions Settings 1 Use the keys to select Closed Captions and press 2 Use the keys to select the desired Closed Captions option. 3 Use the keys to adjust the value. 4 Press . to save and exit the screen. VGA Settings Use VGA Settings to configure the settings for closed captioning in TV programs. Auto Automatically adjust Clock, Phase, H-Position and V-Position settings.
SETUP MENUS Other Settings Use Other Settings to configure the settings for audio On/Off in TV programs. 1 Use the 2 Press the keys to select Other Settings and press keys on the remote control to adjust the Audio on/off. 3 For Audio Onl y On/ Off Restore Default 1 Use the 46 .
SETUP MENUS Lock Press to select the source you want to lock, then press SELECT to set it to lock. If anyone want to use this source, the password is needed. Change Password Change Password allows you to change your current password. The following options are available: • Enter Old Password. • Enter New Password.
SETUP MENUS Changing Password 1 Use the / keys to select Change Password and press . 2 Use the Channel keys to enter the current password and press 3 Use the Channel keys to enter the new password and press . . 4 Use the Channel keys to enter the new password again for confirmation and press . English 5 Press to save and exit the screen. System Lock (On/Off) Input Block Press to select the source you want to lock, then press SELECT to set it to lock.
SETUP MENUS Changing Input Block 1 Use the 2 Use the 3 Press / / keys to select Input Source and press. keys to select Unblock/Block and press to save and exit the screen. US Rating Rating system used at USA. – TV Rating: Use this sub-menu to customize US TV Rating programs. Rating TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA FV D L S V Description Suitable for young children. May not be suitable for children under 7. Suitable for all audiences. Parental guidance suggested.
SETUP MENUS – MPAA: Use this sub-menu to select the ratings of allowable movies. English Rating Description Off G PG PG-13 R NC-17 X 50 Contains nothing most parents will consider offensive for even their youngest children to see or hear; suitable for young children. May contain some material parents might not like to expose to their young children-material that will clearly need to be examined or inquired about before children are allowed to view the film.
SETUP MENUS • Canada Rating Rating system used at Canada. English – Canada English: Use this sub-menu to select the classification categories (based on Canadian ratings) of allowable TV programs and movies.
SETUP MENUS Rating Off C C8+ G PG 14+ 18+ – Description Suitable for viewing by children of all ages. Not suitable for children under 8 years of age. Suitable for general audiences. Parental guidance advised. Suitable for people 14 years of age or older. Suitable for people 18 years of age or older. Canada French: Use this sub-menu to select the ratings of allowable TV programs and movies. These ratings are based on the classification categories determined by La Régie du cinéma du Québec.
SETUP MENUS CHANNEL Use the Channel sub-menus to configure the channel. Press on the remote control to display the setup menu screen then select Channel to display the Channel sub-menu. The following options are available: Signal Type, Auto Scan, Favorite, Channel List, Show/Hide, Channel Number, Channel Label. NOTE: The menu is available only at TV source. Signal Type Set to Air or Cable according to your antenna source. When set to Air, TV can Catch 8VSB broadcasting signal.
SETUP MENUS Auto Scan Select Auto Scan and press ENT. Two options are available: • Are you sure to auto Scan? • No. Auto Search automatically creates a list of receivable channels for the selected source. Favorite List The following options are available: Channel, Channel Label, Favorite, Prev, Next. All of your favorite channels are listed in this menu, and you can choose them quickly.
SETUP MENUS Channel List The following options are available: Press Prev, Next. change Channel, Channel Label, You can view all the channels and choose one quickly. "CH-1": Label of the Channel Show/Hide The following options are available: Channel, Channel Label, Hide, Prev, Next.
SETUP MENUS Channel Number The TV screen shows current TV channel. Channel Label Rename label of the channel..
WALL MOUNT OPTION WALL MOUNT OPTION The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M6 x L12 mm screws to wall mount the LED TV. WALL MOUNT INSTALLATION REMINDERS • Remove the LED TV base first before mounting the unit on a wall. • It is the user's responsibility to use a UL listed wall mount unit rated to support the weight of this LED TV.
TROUBLESHOOTING TROUBLESHOOTING Corrective Action No power • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical device to the power outlet to verify that it is supplying the proper voltage. Power is suddenly turned off. Make sure the sleep timer is turned off. Remote control does not work. • Press only one button at a time.
TROUBLESHOOTING Problem Corrective Action Picture is cut off or appear in a sidebar screen. Press English Poor image quality in TV • mode (cutoff picture, snowy images). Wrong, abnormal or missing colors No sound to adjust the Aspect ratio. Check your antenna connection. If necessary, rotate the antenna and wait up to ten seconds for a signal. • Reduce signal splitters and excessively long cables. • Replace poor antenna cables and/or connectors to improve signal quality.
TROUBLESHOOTING Problem Corrective Action NOTES: If the problem condition persists even after performing the recommended corrective actions, contact us by: Logging on to www.wde.com • Contacting the Westinghouse Customer Service at (800) 701-0680 or e-mail us at service@wde.
SPECIFICATIONS SPECIFICATIONS English Item Specification Model Name UW46T7HW Panel Active Area (Diagonal, mm) 1054.08 (H) x 592.92 (V) Resolution 1,920x1,080 Contrast Ratio (min) 4000:1 (typ.) Response Time 6.5ms (typ.) (min) Audio/Video Input/Output Terminals Aspect Ratio 1.77 (16:9) Display color 8 bit • HDMI x2 • AV with R/L Audio x1 • VGA with 3.
SPECIFICATIONS Item Specification Physical Specifications Dimensions (WxHxD) With stand: 1060.56mm x 664.53mm x 173.98mm Weight (Net) 12.70 Kgs Weight (Gross) 16.96 Kgs NOTES: • These product specifications are subject to change without user notification. • Do not set your computer graphics card to exceed the unit’s refresh rates; doing so may cause damage to the LED TV. 62 English Without stand: 1060.56mm x 623.66mm x 53.
