User Manual

7
CHARGER OPERATION
ONLY CHARGE WITH WESTINGHOUSE 40V 2A RAPID CHARGER (CGA402).
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become hot. A hot battery pack should not be
placed directly onto the charger port until the temperature cools to within acceptable temperature
range. When a hot battery pack is placed on the charger, the red LED will turn on and the green LED
will be o. Remove the battery for 30 minutes and allow to cool then place back on charger.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port but charging will not begin until
the battery temperature warms to within acceptable temperature range. When a cold battery pack is
placed on the charger, the red LED will turn on and the green LED will be o. When the battery pack
warms the charger will automatically begin charging.
LED FUNCTIONS
BATTERY PACK RED LED GREEN LED ACTION
GREEN
LIGHT
RED
LIGHT
With battery pack OFF ON -
FLASHING
Battery is charging.
GREEN
LIGHT
RED
LIGHT
With battery pack OFF ON - SOLID Battery is done charging, remove battery.
GREEN
LIGHT
RED
LIGHT
With battery pack ON - SOLID OFF Battery is too warm/cold. Remove for
approximately 30 minutes for temperature to
fall within acceptable temperature.
GREEN
LIGHT
RED
LIGHT
With battery pack ON -
FLASHING
ON -
FLASHING
Battery is defective, remove battery
immediately and contact support.