Instructions / Assembly

10
ETL-ES-Carolina LED-WH16
BLADE INSTALLATION
INSTALACIÓN DE LAS ALETAS
Check the motor for plastic shipping stabilizer tabs (1), and remove them if they are pres-
ent. Attach blade assembly to motor using the noise-dampening motor gaskets (2) and
motor screws provided. Tighten screws ecurely. NOTE: Some models do not utilize motor
gaskets, washers, or stabilizer tabs.
Verifique si hay lengüetas plásticas de embalaje para sostener al motor (1) y descártelas.
Fije el conjunto de las aletas al motor usando las juntas reductoras de sonido del motor (2)
y los tornillos para el motor incluidos. Apriete los tornillos asegurándolos. NOTA: Algunos
modelos no utilizan juntas para el motor, arandelas o lengüetas de embalaje.
12
11
Attach blade brackets to blades using the blade bracket screws (1), metal
washers (2), and fabric washers (3), if provided. NOTE: Some models do not
utilize fabric washers (3).
Fije los soportes para aletas a las aletas con los tornillos (1), las arandelas
de metal (2) y las de tela (3), si corresponde. NOTA: Algunos modelos no
utilizan arandelas de tela (3).
1
2
2