Wireless Bluetooth® Sound System User Guide UM100WH / UM100BK / UM100RD / UM100GY
What's Included: ·unplug-100 Wireless Bluetooth Sound System ·Travel Pouch(Option) ·USB Charging Cable ·USB Power Adaptor ·3.5mm Headphone Mini Jack Cable General Specifications ·Bluetooth v2.
Features and Benefits ·Bluetooth 2.
Hands-free Calling Answer / End Button Play / Pause / Pairing Volume Up Volume Down LED Indicator 3.
Compatibility Wireless: Devices with Bluetooth 2.0 or above (See General Specifications for profiles), Bluetooth equipped PCs and most Bluetooth equipped smart phones or computers. Wired: Devices with a standard 3.5mm headphone output port via 3.5mm mini jack cable. WARNING 1. Do not leave the product exposed to a heat source or high temperatures. 2. Do not remove or attempt to remove the non-user-replaceable battery. When disposing of the product, take it to a waste electronics service.
LED Indicator and Tone Sound There is an LED light in the middle of the front Bluetooth Sound System. Below are what the LED's various displays indicate and Tone Sound.
NOTE: unplug-100 Wireless Bluetooth Sound System can pair with most Bluetooth 2.0 devices. Pairing may vary by device. Consult your Bluetooth device's manual for pairing instructions. Pairing with Bluetooth devices Pairing occurs when two Bludtooth devices communicate with each other and establish a connection. A record of information about this connection is then stored in the memory of each device. Once you pair a device with the unplug-100 speaker, you should not have to pair it again.
on the speaker for four seconds to make the speaker discoverable. The LED indicator on the unplug-100 speaker LED indicator Flashing Red and Blue. approximately once every second to show that the speaker is discoverable. 2. Set your Bluetooth device to " discover" the unplug-100 speaker , then locate the Bluetooth Device list. 3. From the Bluetooth device list ,select the device named "unplug-100". 4. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK.
Then the blue indicator start flashing and Tone Sound, When the speaker and device have successfully connected. To pair additional devices With the Bluetooth device and the unplug-100 speaker both turned on , touch the button on the speaker for four seconds to make the speaker discoverable again . Then follow steps 2-4 on page 7. The unplug-100 memory can hold up to six paired devices. You can pair more than six devices, but the memory will never contain more than six.
on the speaker (about 5 seconds) until LED indicator flashing Red and Blue to Pairing mode(start Pairing for new device ).The unplug-100 speaker clears all Bluetooth devices from its memory and then becomes discoverable. Reconnection in Event of Bluetooth Disconnection If by any reason your device and unplug-100 Wireless Bluetooth Sound System are disconnected, such as out connection distance or powering off, they can be re-connected by: Select "unplug-100 " from your device for reconnection.
Bluetooth equipped PCs to music or for use as a speaker phone with Skype and other online video/voice chat clients. NOTE: Not all PCs support all Bluetooth profiles needed for full functionality with unplug-100 Wireless Bluetooth Sound System. Your PC may need additional Bluetooth drivers or profiles installed. Please consult your owner's manual. If your PC does not support needed Bluetooth profiles, you can connect with a 3.5mm to 3.
5. Windows 7 will guide you through set-up. If Prompted, the Pass code is 0000. 6. Be sure your PC's audio output and Mic input are set to unplug-100 Music then click "Continue". Your PC is now ready to use unplug-100 Wireless Bluetooth Sound System to play music and for hands-free online chat. If you have a Bluetooth equipped Mac, please consult your owner's manual for pairing instructions.
Taking Calls on a Mobile Phone Connected to unplug-100 Wireless Bluetooth Sound System When you receive an incoming call, ring tone will sound from unplug-100 Wireless Bluetooth Sound System. If you are listening to music through your Mobile Phone the music will automatically pause. To accept a call: You can accept a call as you usually do, using your Mobile Phone controls or touch the on the top of unplug-100 Wireless Bluetooth Sound System. Speak normally.
Controlling iPod or Bluetooth PC or music phone's music Playback on unplug-100 Wireless Bluetooth Sound System In Addition to using the playback control on your iPod or Bluetooth equipped PC or music phone as you normally would, you can control music playback from unplug-100 Wireless Bluetooth Sound System using the touch buttons. NOTE : Your device must support AVRCP (Audio Video Remote Control Profile) to control your device's from unplug-100 Wireless Bluetooth Sound System.
Volume control : Touch the(+) to increase volume and the (-) button to decrease volume. NOTE : When connected to a Mobile Phone, if you touch the , the first track in your music library will begin to play. This function is disabled during an incoming call. Connecting to a Device via 3.5mm " AUX IN " Input You can use unplug-100 Wireless Bluetoth Sound Sytstem for music playback with and device that has 3.5mm headphone port. You will need a 3.5mm to 3.5mm mini jack cable.
Controlling Volume When Connected via 3.5mm" AUX" Input: NOTE: Volume cannot be controlled with the volume control on unplug-100 Wireless Bluetooth Sound System when connected via the 3.5mm "AUDIO IN" input. Use the volume control on you device as you normally would. Recharging Battery Make sure the power switch is set to "ON". Plug the Micro USB end of the included USB cable into USB mini port, Marked "USB " on the back of unplug-100 Wireless Bluetooth Sound System.
Trouble Shooting Sound is very low or no sound ·Please check unplug-100 Wireless Bluetooth Sound System or Bluetooth device Volume Level ·If using 3.5mm port, be sure the mini jack cable is securely inserted into unplug-100 Wireless Bluetooth Sound System and your device Music is playing on a device but isn't transferring to unplug-100 Wireless Bluetooth Sound System ·Make sure your Bluetooth device has A2DP(check your device's owner's manual) ·Be sure the device is paired ·If using 3.
Trouble Shooting 17 LED light not ON ·Make sure unplug-100 Wireless Bluetooth Sound System main switch is ON ·Make sure unplug-100 Wireless Bluetooth Sound System is charged ·Battery already full charged Hands-free calling is not working with iPod or mobile phone ·Make sure your mobile device has HSP / HFP ·Be sure your mobile phone is paired ·Check volume on unplug-100 Wireless Bluetooth Sound System
www.westinghousedigital.