Owner's Manual

OPERATION

LIFTING BRACKET

1. Before lifting the generator, inspect the bracket and

make sure it is securely fastened to the generator.

Do not lift the generator unless the lifting bracket is

securely fastened.

2. Hook a chain or strap through the eye on the lifting

bracket and make sure it is securely fastened.

3. Connect a suitable lifting device to the chain or

strap.

4. Lift the generator slightly to ensure it is lifting

straight and level. Adjust the bracket if required to

allow it to lift correctly.

Figure 20 – Lifting Bracket

GENERATOR ANCHOR

The generator should be used on a ﬂat, level surface

whenever possible. If the particular job site requires the

generator to be used on uneven terrain, the generator

should be anchored. Insert a stake or piece of rebar

through the anchor bracket on the frame (see Figure

21). Drive the stake into the ground to secure the

generator and prevent it from moving. The anchor is

standard on 10KPRO and optional on 8KPRO.

WARNING

Anchoring the generator to the

ground does not electrically ground

the generator. For proper electrical

grounding of the generator, see

Grounding the Generator on page 24.

Figure 21 – Anchor Bracket