USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO EW46T4LZ
Contents Contents Caution Safety Information 2 3 Unit and Accessories Product Feature 4 4 Introduction 1. Front View 2. Rear View 3. Instruction for Wall Mount 4. Remote Control 5-9 5 6 7 8-9 First Time Installation 10-11 Basic Operation 12 OSD Menu 1. Picture menu 2. Sound menu 3. Channel menu 4. Parental Control menu 5. Setup menu 6.
Caution Caution is intended to alert the user to the presence of un-insulated "dangerous to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information Electrical safety the power cable Physical safety 3
Unit and Accessories and Product Feature Unit and Accessories Warranty Card TV set Quick Connect Guide User's Manual Remote Control and Batteries (AAA x2) Product Feature 39 1920 x 1080 native resolution for Full-HD(1080p) performance Three HDMI ® inputs for true digital connections HDMI is a trademark of HDMI Licensing LLC in the United States and other countries.
Introduction Introduction 1. Front View Power Indicator Remote Control window (Keep clear) 1). (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off. Indicator on(Red) Indicator on(Green) Standby mode Power on mode The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 300 to the left or right side and 200 above or below the remote control window. 2).
Introduction VIDEO R L Y Pb Pr R L 2. Rear View PC IN RF VGA HDMI1 HDMI2 HDMI3 COAX USB (SERVICE) HEADPHONE OUT HEADPHONE OUT PC IN RF VGA HDMI1 1). AC POWER IN: Connect to an earth 100-240V~ 50/60Hz outlet with the power cable. 2). SWITCH: Switch on/off the power supply. 3). Headphone out : Connect it to your headphone or audio equipments. 4). 5). 6). RF : Connect antenna or cable 75 Ohm coaxial to receive TV signal. 7). HDMI1/2/3 : Connect it to the HDMI output of video device.
Introduction 3. Instruction for Wall Mount A wall mount kit (purchased separately) would allow you to mount your Westinghouse TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. Westinghouse is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting.
Introduction 4. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER(red button): Turn the TV on/standby. INPUT: Press to display the input source menu. INPUT 1 2 3 4 5 6 7 8 9 0 PICTURE SOUND SLEEP DISPLAY CH+ VOL+ MUTE CH- VOLEXIT MENU OK ENTER CC Number Buttons: Choose channel directly.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3. Close the cover. - The remote control should be operated within 23 feet(7m) and 300 to the left and right of the IR Receiver on the front of the TV. - Used batteries should be disposed properly.
First Time Installation First Time Installation The following pictures will appear on the screen when the TV is turned on for the first time. 1. Select the OSD menu language by buttton, and press OK/ENTER button to enter the next menu. 2. Select the Time Zone by buttton, then select Next item by button and press OK/ENTER button to enter the next menu. 3. Select the power on mode by buttton, and press OK/ENTER button to enter the next menu. Note: Home mode --- Power saving mode.
First Time Installation 5. Select the Antenna [ATSC] or Cable mode by to enter the next menu. buttton, and press OK/ENTER button 6. Select Next item by button and press OK/ENTER button to enter the next menu. Model: XXXXXXX Serial No: XXXXXXXXXXX Channel Scan Type: ATSC 7. Select Next item by button and press OK/ENTER button to enter the next menu. *6. The auto searching may take a few minutes to complete. 8. Enter the code by the number buttons on the remote control to start the auto channel search.
Basic Operation Basic Operation Power on/off 1. Connect to the power supply with the power cord, and turn on the switch. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display input source menu, and use CH+/- button on the TV set or Ĥ0ĥ!button on remote control to select the input source, press OK button on the remote control to enter.
OSD Menu OSD Menu 1. Picture menu Description Picture Settings: Press button to enter the Picture Settings menu. Picture mode: Select between Dynamic, Standard, Movie and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Note: when select the "Standard", the machine is in energy-saving status. Brightness: Adjust brightness of the picture. Contrast: Control the difference between the bright and dark regions of the screen picture.
OSD Menu OSD Menu Advanced Picture Settings: Press button to enter the Advanced Picture Settings. Dynamic Contrast: Activate or deactivate the Dynamic. Contrast funciton. Film Mode: Activate or deactivate the Film Mode. Noise Reduction: If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level between Off, Low, Medium and High. MPEG Noise Reduction: Select the MPEG Noise Reduction option to reduce the picture noise level between Off, Low, Medium and High.
OSD Menu OSD Menu 2. Sound menu Description Sound Settings: Press button to enter the Sound Settings menu. Sound Mode: Select your desired picture mode as follow: Dynamic, Standard, Soft and User. You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequency intensity. Treble: High frequency intensity. Balance: Left and right stereo audio channels balance. Surround Mode: Activate or deactivate the Surround function.
OSD Menu OSD Menu 3. Channel menu Description Channel List: Display the channel list. Favorite List: Display the favorite channel list. Channel Settings: Press > button to display the Channel Settings menu. Press button to select the item, and press OK button to change the setting. Signal Type: Allow you to select antenna between Air, Cable and QAM. Auto Channel Search: Press OK button to start auto channel search.
OSD Menu ĥ OSD Menu µ If you select “QAM” as input signal in Signal Type item, you can press button to search the channels automatically. The receivable channels will be stored automatically. When searching channels, press MENU to stop. NOTE: It will take a while to auto scan in NTSC or ATSC mode, please wait patiently. 1. Select Next item by button and press OK/ENTER button to enter the next menu. Model: XXXXXXX Serial No: XXXXXXXXXXX Channel Scan Type: QAM 2.
OSD Menu OSD Menu 4. Parental Control menu You must enter the password to gain access to the Parental Control menu. The default password is 0000. You may modify the following options: Description V-CHIP: Press button to enter the V-CHIP menu. US V-CHIP: Press button to enter the US V-CHIP menu. Movie Rating: The Movie rating (MPAA) is used for original movies rated by the Motion Picture Association of America (MPAA) as broadcasted on cable TV and not edited for television.
OSD Menu OSD Menu Canada V-CHIP: Press button to enter the Canada V-CHIP menu. English Rating: Select among: C, C8+, G, PG, 14+ and 18+. French Rating: Select among: G, 8ans+, 13ans+, 16ans+ and 18ans+. Block UnRated Show: Activate or deactivate the Block UnRated Show function. Downloadable Rating: Setting the Downloadable Rating in DTV mode when the program has the rating information. Clear Downloadable Data: Clear the downloadable data of the TV.
OSD Menu OSD Menu 5. Setup menu Description Closed Caption: Press button to enter the Closed Caption menu. Caption Display: Activate or deactivate the Caption displaying. Analog Caption Type: Allow you to select the basic selection among: CC1, CC2, CC3, CC4, Text1, Text2, Text3 and Text4. Digital Caption Type: Allow you to select the advanced selection among: Service1, Service2, Service3 Service4, Service 5 and Service 6. Digital CC Preset: Select the Digital CC Preset between Default and Custom.
OSD Menu OSD Menu 6. Others menu Description Blue Back: Turn on/off the blue screen function when there’s no signal. No Signal Power Off: The TV will turn off automatically if there’s no signal after 10 minutes. No Operation Power Off: The TV will turn off automatically if there’s no operation on the TV after 3 hours. All Reset: Enter the password (the same passord for Parental Control menu) and reset all the settings.
Simple Troubleshooting Simple Troubleshooting If the TV has failed or its performance has seriously deteriorated, check the TV by using the following simple troubleshooting guide. If you can not resolve the problem with this troubleshooting, please call Westinghouse Technical Support. No power - Check all power connections to the TV. - Press either the power button or the Standby button on the Remote control. No picture or sound - Ensure that the TV is plugged in and the power is on.
LCD Panel Input Connector Output Connector Panel Size 46 inches (diagonal) Resolution 1920 x 1080 Video 1 Audio(L/R) 2 VGA 1 PC Audio 1 HDMI 3 YPbPr 1 RF 1 Headphone 1 COAX 1 Audio (L/R) 1 Power Source AC 100 - 240V, 50/60Hz Maximum Power Consumption 150W * Product specifications and appearance are subject to change without notice.
www.westinghousedigital.
