EW39T6MZ
TABLE OF CONTENTS TABLE OF CONTENTS i English TABLE OF CONTENTS................................................................. i DIGITAL TELEVISION TRANSITION NOTICE ............................ 1 ENERGY STAR DISCLAIMER ..................................................... 1 IMPORTANT INFORMATION....................................................... 2 Warnings .................................................................................. 2 NOTICES .................................................
TABLE OF CONTENTS English POWER CONNECTION ............................................................. 21 CONNECTING AC POWER................................................... 21 INITIAL SETUP ...................................................................... 21 ANTENNA OR COAXIAL CABLE CONNECTION SETUP .... 22 CABLE OR SATELLITE BOX CONNECTION SETUP .......... 24 OTHER INPUT SOURCE CONNECTION SETUP ................ 25 BASIC OPERATIONS................................................................
DIGITAL TELEVISION TRANSITION NOTICE DIGITAL TELEVISION TRANSITION NOTICE For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see www.DTV.gov. For information on the TV Converter program, and on government coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009. ENERGY STAR DISCLAIMER This Westinghouse product has earned the ENERGY STAR® for meeting U.S.
IMPORTANT INFORMATION IMPORTANT INFORMATION Warnings To reduce the risk of fire or electric shock: English • Do not expose this product to rain or moisture. • Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified service personnel. • The plug should be connected to a mains socket outlet with a protective earthing connection.
IMPORTANT INFORMATION NOTICES Important Notices Concerning Power Cord Selection Figure A1 Figure A2 For the United States and Canada In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table, type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for the LED TV.
IMPORTANT INFORMATION FCC COMPLIANCE STATEMENT English This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions.
IMPORTANT INFORMATION IMPORTANT SAFETY INSTRUCTIONS Make sure to note and follow all warnings and instructions marked on the LED TV. Observe the following safety instructions. Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
IMPORTANT INFORMATION Circuit Overload Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock. English Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords for damage. Install the LED TV near a wall socket outlet where the power cord can be readily accessed.
IMPORTANT INFORMATION WARNINGS AND PRECAUTIONS Do not orient the LED TV towards direct sunlight to reduce glare. • If the LED TV will not be used for a long period of time, unplug the unit and remove the batteries from the remote control. • Avoid touching the display screen by hand or any object. • Never remove the rear cover. The LED TV interior contains high-voltage parts. You may be seriously injured if you touch them. • Always handle the LED TV with caution when moving it.
IMPORTANT INFORMATION ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding English If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges.
IMPORTANT INFORMATION CLEANING THE LED TV Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
PACKAGE CONTENTS PACKAGE CONTENTS Remote Control (with 2x AAA batteries) LED TV Base User Manual Power Cord Warranty Card AC Adapter Warranty Brochure English 39” LED TV Unit Screws for Base M4x16 *4pcs TV stand 10 M4x12*4pcs Stand cover M4x16L*4pcs TV column
CONTROL PANEL CONTROL PANEL INPUT 2 MENU CH+ 3 English 1 CHVOL+ 4 VOL- Item 1. INPUT 2. MENU 3. CH +/4. VOL +/5. POWER DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE POWER 5 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Description • Selects the video input source. • Executes a command on a menu screen. Displays the LED TV setup screen. • Switches the channel during TV viewing.
TERMINALS English USB TERMINALS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE DC IN TUNER VGA AUDIO IN VIDEO R IN L R OUT L HDMI 1 HDMI 2 SPDIF REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Item Function 1. DC in Connects the AC to DC adapter from this outlet to a power source. 2. TV tuner Connects the LED TV to an antenna or cable service. 3.
REMOTE CONTROL REMOTE CONTROL 2 3 5 7 4 6 8 9 10 11 12 13 14 15 16 17 19 18 Description 1. Mute Mutes the sound. Press again to toggle the sound back on. 2. Power Toggles the TV power on or off. 3. Channel keys Use to key in the channel number. 4. Enter ENT Executes a channel entry. 5. Sleep Sets the sleep timer for the LED TV to turn off automatically. 6. VGA Switches to the VGA input source. 7. Picture Mode Selects a preset viewing options. 8.
REMOTE CONTROL OPERATION REMOTE CONTROL OPERATION INSTALLING THE REMOTE CONTROL BATTERIES English CAUTIONS: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to the (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to physical injury.
LED TV BASE LED TV BASE INSTALLING THE LED TV BASE 1 Open the LED TV carton box. 2 Remove the LED TV base. 3 Remove the plastic bag. 4 Remove the two top carton stabilizers from the LED TV. 5 Remove the protective plastic covering the LED TV. 6 Grasp the two sides of the LED TV and then pull it out of the carton box. 7 Remove the two bottom carton stabilizers from the LED TV. 8 Lay the LED TV on a clear, flat, and stable surface.
LED TV BASE 11 Attach the TV column with the foot stand and use four M4 x 16 screws to secure it. ON SHOCK SHOCK, CAUTI OPEN OF ELECTRIC RISK DO NOT OF ELECTRIC BACK) RISK (OR THE INSIDE COVER PERSONNEL PARTS TO REDUCE REMOVE EABLE SERVICE CAUTION: DO NOT TO QUALIFIED NO USER-SERVIC SERVICING REFER English 12 Carefully orient the LED TV in an upright position.
REMOVING THE LED TV BASE REMOVING THE LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base. Turn off the LED TV and all connected devices. 2 Disconnect the power cord from the LED TV. 3 Disconnect all signal cables from the I/O port terminals. 4 Lay the LED TV on a clear, flat, and stable surface.
ANTENNA CONNECTION ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION English Cable TV lead in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) 300 ohm twin-lead (flat) RF IN 300-75 ohm ADAPTER (Not supplied) Separate VHF/UHF Antenna VHF Antenna UHF Antenna Home Antenna terminal (75 ohm) 300 ohm twin-lead COMBINER (Not supplied) 300 ohm twin-lead IN OUT 75 ohm coaxial cable NOTE: The F-type connector should be finger-tightened only.
EXTERNAL DEVICE CONNECTIONS • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys.
EXTERNAL DEVICE CONNECTIONS The following diagram shows the external device connections. Audio amplifier PC USB English AUDIO OUT 3.
POWER CONNECTION POWER CONNECTION CONNECTING AC POWER Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL INITIAL SETUP Press on the control panel or on the remote control to turn on the LED TV. Select the desired language and your time zone to use the Setup Wizard.
POWER CONNECTION ANTENNA OR COAXIAL CABLE CONNECTION SETUP Select Language Select Language Follow this guide to help you set up your TV. Use the Up and Down arrows on your remote control and select the Language you want to use for menus and message screens. English :Move English Enter French Enter Spanish Enter ENTER :Press to Execute Time Zone Time Zone Use the left or right key to select on you time zone.
POWER CONNECTION Scan Channels from Antenna or coaxial cable input Use the Up or Down key arrows on you remote control to select ther channel scan type Select Channel Scan Type Use the / keys on your remote control to select the channel scan type. Press SELECT to continue. Antenna [ATSC] Back MENU :Return :Move ENTER :Press to Execute AUTO CHANNEL SEARCH - Cable The channel scan may take a while to complete. When the scan is complete, you will be able to watch your local TV programming.
POWER CONNECTION CABLE OR SATELLITE BOX CONNECTION SETUP Select Language Select Language Follow this guide to help you set up your TV. Use the Up and Down arrows on your remote control and select the Language you want to use for menus and message screens. English :Move English Enter French Enter Spanish Enter ENTER :Press to Execute Time Zone Time Zone Use the left or right key to select on you time zone.
POWER CONNECTION RF Warning Note:We don’t recommend RF as your connection because its poor video signal and quality; Go back to choose another source; If you don’t have a Cable Box that can provide High Definition quality signals, We recommend you call your Cable provider for Help! RF Warning Select “Proceed” and then press SELECT to continue. Press to return to the previous screen.
POWER CONNECTION Let’s Get Connected Let’s Get Connected... Select “Game, Blu-Ray, DVD, or other player” and press SELECT to continue. Cable Box or Satellite Box Game, Blu-Ray, DVD, or other player Press to return to the previous screen. English Antenna or coaxial cable input Back MENU :Return :Move ENTER :Press to Execute SOURCE LIST Page 1/1 Use the / keys on your remote control to select the input source. Press SELECT to continue.
BASIC OPERATIONS BASIC OPERATIONS TURNING THE POWER ON AND OFF Turning on the power on the control panel or on the remote control to turn on the LED TV. Turning off the power Press on the control panel or on the remote control to turn off the LED TV. The LED behavior will depend on the enabled Power settings. INPUT MENU CH+ Operation Turns from none to red. Turn the power on. Turns from red to none. Turn the power off.
BASIC OPERATIONS CHANGING CHANNELS Follow the instructions below to change channels. Using the Ch / Buttons English Browse channels To browse through the available channels, press CH the remote control or CH +/- on the control panel. / on Using the Channel Keys Selecting channel To change to a certain channel, key in the channel number using the channel keys and press ENT.
BASIC OPERATIONS Using the Input Key Select source using Input Key 1 Press INPUT. A list of supported video sources is displayed. / English 2 Press the keys to select the preferred source. 3 Press SELECT to switch to the selected input source. ADJUSTING THE DISPLAY FORMAT The input source can sometimes affect the way images are displayed on-screen. You can adjust the display format to view the image properly. Format Options Press repeatedly to toggle the display format.
SETUP MENUS SETUP MENUS SETUP MENU OPERATION Use the setup menus to configure the various operational settings of the LED TV. English Displaying the setup menu screen Press on the remote control or MENU on the control panel to display the setup menu screen. Navigating the setup menu screen Use the buttons on the remote control or on the control panel to navigate through the menu screens.
SETUP MENUS PICTURE Use the Picture sub-menus to configure the display quality. PICTURE Picture Settings Screen Size Standard VGA Settings(N/A) Color Temperature Normal Advanced Picture Settings MENU :Return :Move ENTER :Go to Next Menu Picture Settings Adjust the picture quality including brightness, contrast, color, tint, and sharpness.
SETUP MENUS Picture mode Use this sub-menu to select one of four preset view options optimized for different viewing conditions. English The following options are available: • Standard: Select for standard picture. • Movie: Select for a finely detailed picture. • User: Select for standard picture. • Dynamic: Select for enhanced picture contrast and sharpness. Brightness Use Brightness to adjust the luminance level.
SETUP MENUS Color Use Color to adjust the color intensity. Adjusting Color 1 Use the / 2 Press the 3 Press keys to select Color and press / English Color or SELECT. keys on the remote control to adjust the Color level. or SELECT to save and exit the screen. Tint Use Hue to adjust the balance of the red, green, and blue colors in the display. Adjusting Tint Tint The following options are available: 1 Use the / 2 Press the 3 Press keys to select Tint and press / or SELECT.
SETUP MENUS 2 Press the 3 Press / keys on the remote control to adjust the sharpness level. or SELECT to save and exit the screen. Screen Size English Use Screen Size to select the display aspect ratio till the picture is fit onto the screen. The available options are: • Standard: Picture is displayed in its original size. • Fill: Picture is displayed to cover the entire screen. • Over Scan: Picture is scaled up to fit the display area.
SETUP MENUS VGA Settings VGA Settings Menu is available only in PC DB15 or DVI mode. When DVI signal input, only Horizontal Position and Vertical Position can be adjusted. or English Press the / keys to highlight one of the following options, then press SELECT to select it. VGA SETTINGS Auto Adjust Enter H. Position V. Position Clock Phase Reset MENU :Return Enter :Move ENTER :Press to Execute Auto Adjust Automatically adjust Clock, Phase, H-Position and V-Position settings.
SETUP MENUS Clock Adjust the DB15 picture signal sampling clock rate. Clock English Phase Adjust the DB15 picture signal sampling phase. It maybe affect the definition. Wrong value maybe result the interference. Phase Reset Reset the parameters of current menu to default value. Adjusting VGA Settings 1 Use the / 2 Press the 3 Press keys to select VGA Settings and press / or SELECT. keys on the remote control to select the desired option. or SELECT to save and exit the screen.
SETUP MENUS 3 Press or SELECT to save and exit the screen. Advanced Picture Settings ADVANCED PICTURE SETTINGS • Off Film Mode Off Noise Reduction Low MPEG Noise Reduction Off :Return :Move English MENU Dynamic Contrast :Change Setting Dynamic Contrast (Off/On) The system will adjust the luminance curve by analyzing the picture content dynamically. • Film Mode (Off/On) For the 2:2 or 3:2 format signal of cinema, enable special pixel process to reduce the flick of moving area.
SETUP MENUS SOUND Use the Sound sub-menus to configure the sound quality. English Press on the remote control or MENU on the control panel to display the setup menu screen then select SOUND to display the Sound sub-menu. The following options are available: Sound Settings, Surround Mode, AVL, Analog Sound, Digital Sound, Digital Audio Output, and Equalizer Settings.
SETUP MENUS Sound mode Use this sub-menu to select one of four preset view options optimized for different listening conditions. The following options are available: Standard: Select for standard picture. • Soft: Select for a finely detailed picture. • User: Select for standard picture. • Dynamic: Select for enhanced picture contrast and sharpness. English • Bass Use Bass to calibrate low-pitched sounds.
SETUP MENUS Balance Use Balance to adjust the sound balance between the L/R speakers. Adjusting Balance English Balance 1 Use the / 2 Press the 3 Press keys to select Balance and press / or SELECT. keys on the remote control to adjust the Balance level. or SELECT to save and exit the screen. Surround Mode Set to enjoy the virtual surround mode. Adjusting Surround Mode 1 Use the / keys to select Surround Mode. 2 Press SELECT on the remote control to enable/disable this function.
SETUP MENUS Analog Sound (SAP/Stereo/Mono) Available at analog TV channels. Digital Sound (English/French/Spanish) Available at digital TV channels. Set the preferred sound track of digital channels. French and Spanish exist on some channels. Digital Audio Output (PCM/Raw/Off) Set the audio output type of coax or optical terminal. Raw means output the original format of audio stream. PCM can be matched with most AV amplifiers.
SETUP MENUS CHANNEL Use the Channel sub-menus to configure the channel. English Press on the remote control or MENU on the control panel to display the setup menu screen then select CHANNEL to display the Channel sub-menu. The following options are available: Channel List, Favorite List, Channel Settings, Signal Type, Auto Channel Search.
SETUP MENUS Favorite List All of your favorite channels are listed in this menu, and you can choose them quickly. FAVORITE LIST Page 1/1 English A1 ABC A2 A17 A28 MENU :Return :Move :Page ENTER :Select Channel Settings Set the favorite channels, skipped channels, and label of channels. CHANNEL SETTINGS Channel Page 1/7 Skip Favorite Label A1 ABC A2 A3 A4 A5 A6 MENU :Return :Cursor/Page ENTER :Select • Skip: Set the channel to be skipped when pressing CH control to view channels.
SETUP MENUS Change the settings • Skip & Favorite Press the English Press the cancel. • / / keys to select the channel you want to set. keys to highlight corresponding item, and press SELECT to set or Label Press the / keys to select the channel and SELECT to enter the edit state. Press the / keys to select the character, press the cursor. The maximum is seven characters. / keys to move the Signal Type Select the tuner mode type.
SETUP MENUS PARENTAL CONTROL Use the Parental Control sub-menus to configure the parental control. PARENTAL CONTROL Lock Parental Control V-CHIP(N/A) Change Password(N/A) Keypad Lock(N/A) Source Lock(N/A) MENU :Return 0-9 :Enter password Lock Parental Control The following items are only available if the password input is correct. V-CHIP • US V-Chip Rating system used at USA. – Movie Rating: Use this sub-menu to select the ratings of allowable movies.
SETUP MENUS Rating G English PG PG-13 R NC-17 X – Description Contains nothing most parents will consider offensive for even their youngest children to see or hear; suitable for young children. May contain some material parents might not like to expose to their young children-material that will clearly need to be examined or inquired about before children are allowed to view the film. May contain some scenes of drug use; use of one of the harsher sexually-derived words may be heard.
SETUP MENUS Rating TV-Y7 TV-G TV-PG TV-14 D L S V FV • Canada V-Chip Rating system used at Canada. – English Rating: Use this sub-menu to select the classification categories (based on Canadian ratings) of allowable TV programs and movies. ENGLISH RATING E C C8+ G PG 14+ 18+ MENU Rating E C C8+ G PG 14+ 18+ :Return :Move ENTER :Lock/Unlock Description Exempt shows Suitable for viewing by children of all ages. Not suitable for children under 8 years of age. Suitable for general audiences.
SETUP MENUS – French Rating: Use this sub-menu to select the ratings of allowable TV programs and movies. These ratings are based on the classification categories determined by La Régie du cinéma du Québec. FRENCH RATING English E G 8 ans+ 13 ans+ 16 ans+ 18 ans+ MENU Rating E G 8 ans+ 13 ans+ 16 ans+ 18 ans+ • :Return :Move ENTER :Lock/Unlock Description Exempt shows For general audiences.
SETUP MENUS Change Password Change Password allows you to change your current password. CHANGE PASSWORD Old PIN English New PIN(N/A) confirm(N/A) MENU :Return 0-9 :Enter password Changing Password 1 Use the SELECT. / keys to select Change Password and press or 2 Use the Channel keys to enter the current password on Old PIN. 3 Use the Channel keys to enter the new password on new PIN. 4 Use the Channel keys to enter the new password again on confirm for confirmation.
SETUP MENUS Source Lock Press the / to confirm. A keys to select the source you want to block, then press SELECT icon indicates the selected input source has been blocked.
SETUP MENUS SETUP Use the Setup sub-menus to configure the LED TV operational. SETUP Closed Caption Menu Language English Clock OSD Timer 20 S Power Light MENU :Return :Move ENTER :Go to Next Menu Closed Caption Use Closed Caption to configure the settings for closed captioning in TV programs. • Caption Display Display or hide the CC. • Analog Caption Type Select from below closed-caption modes for analog programs. CC1,2,3,4: Displays corresponding caption channel of a analog program.
SETUP MENUS • Digital CC Style This function is only available if Digital CC Preset is set to Custom. DIGITAL CC STYLE CC Size English MENU Default CC Font Default CC Opacity Default Text Color Default CC Background Opacity Default CC Background Color Default :Return :Move :Change Setting The following options are available: – – – – – – CC Size: Can be set to Default, Small, Standard, or Large.
SETUP MENUS Menu Language Use Menu Language to select the language to display on the screen: English, French, or Spanish. Adjusting Menu Language / 2 Press the Spanish. 3 Press keys to select Menu Language. / keys on the remote control to select English, French, or to exit the screen. Clock Set the Time Zone, Auto Clock, Setup Time, Day of Week or Daylight Saving Time.
SETUP MENUS • Daylight Saving Time Set to turn on/off daylight saving. This option is only available if Auto Clock is disabled. OSD Timer English Set the duration OSD menu stays visible on the screen. Adjusting OSD Timer 1 Use the / 2 Press the 3 Press keys to select OSD Timer. / keys on the remote control to select the desired settings. to save and exit the screen. Power Light Set to select power light. Adjusting Power Light 1 Use the / keys to select Power Light.
SETUP MENUS OTHERS Use the Others sub-menus to configure other general settings. OTHERS Blue Back No Signal Power Off No Operation Power Off All Reset MENU :Return :Move ENTER :On/Off Blue Back Select to enable the blue background in case of no signal. No Signal Power Off Select to set the TV to automatically turn off in case of no signal for 10 minutes. No Operation Power Off Select to set the TV to automatically turn off if it is left idle for 3 hours.
WALL MOUNT OPTION WALL MOUNT OPTION The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M6 x 12 mm screws to wall mount the LED TV.
TROUBLESHOOTING TROUBLESHOOTING Corrective Action • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical device to the power outlet to verify that it is supplying the proper voltage. No power Power is suddenly turned off. English Problem Make sure the sleep timer is turned off. • Press only one button at a time. Remote control does not work.
TROUBLESHOOTING Problem Corrective Action English No picture or the No • Signal message • appears when a VGA cable is connected. • Picture is cut off or appear in a sidebar screen. Poor image quality in TV mode (cutoff picture, snowy images). Decrease the video resolution setting on the computer and try again. Adjust the display settings. Press to adjust the Aspect ratio. • Check your antenna connection. If necessary, rotate the antenna and wait up to ten seconds for a signal.
TROUBLESHOOTING Problem • Make sure the audio input cable is properly connected to the correct terminal, and that the correct input mode is enabled. • The volume may be muted. Press again or press VOL+ key to turn on the volume. • Adjust the Bass, Treble, and Balance settings in SOUND menu. English No sound Corrective Action NOTES: If the problem condition persists even after performing the recommended corrective actions, contact us by: • Logging on to www.wde.
SPECIFICATIONS Item Specification Model Name EW39T6MZ Panel Active Area (Diagonal, mm) 853.92 (H) x 480.33 (V) Resolution 1920 (H) x 1080 (V) Contrast Ratio (typ) 5000:1 Response Time 8ms (g-g) (typ) Audio/Video Input/Output Terminals Aspect Ratio 1.77 (16:9) Display color 16.7M • • • • HDMI x2 AV with R/L Audio x1 VGA with 3.
SPECIFICATIONS Item Dimensions (WxHxD) With stand: 888.2mm x 577.34mm x 249.94mm Without stand: 888.2mm x 518.72mm x 52.52mm Weight (Net) 11.02kg Weight (Gross) 13.9kg English Physical Specifications Specification NOTES: • These product specifications are subject to change without user notification. • Do not set your computer graphics card to exceed the unit’s refresh rates; doing so may cause damage to the LED TV.
Orange, CA SE-UM-3901-0101 1509-03EQ000
