User manual

USING THE OVEN

Using the 2-hour timer

MANUAL OPERATION

The timer needs to be set at the “0” marker for the

oven to be used manually.

AUTOMATIC OPERATION

The 2-hour timer features an automatic oven “cut-off”.

This means that a cooking period of up to 120 minutes

can be set.

1. Set the Oven Temperature Control Knob to the

required temperature.

2. Turn the cut-off timer to the required number of

minutes. NB: For timer settings of less than 20 minutes,

turn the knob past 20 minutes, and then go back to the

required number of minutes. This is to ensure that the

timer’s bell ringer is correctly set.

3. When the timer returns to the “Auto Off” position, it will give a short ring and the

oven element will be switched off. Although the oven element is off, the oven light,

the cooling/venting fan and the oven fan will remain on whilst the Timer is in “Auto

Off” mode. They will stay on until both the Timer and the Oven knobs are moved to

the “Off” position.

4. The oven will not operate again until you turn the timer back to the “0” marker.

This will set the timer to manual mode.

NB: It is not recommended to use this timer for short durations, e.g. boiling eggs.

3 button programmable timer

General features

Your 3 button programmable timer has the following features:

• Timer – your 3 button programmable timer allows you to set

a countdown time that will beep when the set time has

elapsed.

• Cooking duration – You can set a cooking duration. A timer will count down the preset cooking

time, beep when the time has elapsed and turn the oven off.

• End cooking time – you can set a cooking finish time. A timer will count down the preset

cooking time, beep when the finish time has been reached and turn the oven off.

• Delayed start cooking time – You can combine the cooking time and stop cooking time to

switch the oven on and off at a specific time during the day.

Note: Your 3 button programmable timer only operates with your main oven.

Setting the time of day

You must set the time of day before you can operate your appliance. When power is supplied to

your oven “12.00“ will be displayed and the “clock” indicator will flash.

1. To set the time of day in hours and minutes, press the – or + buttons. 5 seconds after the last

change, the “clock” indicator will disappear, confirming the time has been set.

Note: The clock has a 24-hour display.

SIMPRD 342-1-529 30/1/08 8:51 AM Page 12