User manual


Setting the time of day
You must set the time of day before you can operate your
appliance. When power is supplied to your oven “12.00“
will be displayed and the “clock” indicator
will flash.
1. To set the time of day in hours and minutes, press – or +.
5 seconds after the last change, the “clock” indicator
will disappear, confirming the time has been set.
NOTE: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1. Press “mode” until the “clock” indicator
begins
flashing.
2. Press – or + to change the time. 5 seconds after the last
change, the “clock” indicator
will disappear, confirming
the time has been set.
Setting the timer
1. Press “mode“ until the “timer” indicator
begins flashing.
2. Set the countdown time you want by using – and +. 5
seconds after the last change the “timer” indicator
will
stop flashing, confirming the timer has been set.
3. To stop the beeper, press –, + or “mode”.
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The
oven indicator light will glow and the heating source will
come on.
3. Press “mode“ until the “cook time” indicator
begins
flashing.
4. Set the cooking duration you want by using – or +. 5
seconds after the last change, the “cook time” indicator
will stop flashing, and the time of day will be displayed.
NOTE: Do not forget to add preheating time if necessary.
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The
oven indicator light will glow and the heating source will
come on.
3. Press “mode“ until the “end time” indicator
begins
flashing.
4. Enter the time of day you want to finish cooking by
pressing – or +. 5 seconds after the last change, the “end
time” indicator
will stop flashing and the current time of
day will be displayed.

2-hour “Auto Off” timer
The 2-hour timer features an automatic oven “cut off”. This
means that a cooking period of up to 120 minutes can be
set. When the timer has counted back to “Auto Off” a bell
will sound and the oven will automatically switch off.
Once automatic baking is complete, return to manual
operation by setting the timer to the ‘OFF’ mark.
NOTE:
It is not recommended to use this timer for short
durations (e.g. boiling eggs).


General features
Your touch control clock has the following features:
• Timer – allows you to set a countdown time that will
beep when the set time has elapsed.
• Cooking duration – You can set a cooking duration.
A timer will count down the preset cooking time, beep
when the time has elapsed and turn the oven off.
• End cooking time – you can set a cooking finish time.
A timer will count down the preset cooking time, beep
when the finish time has been reached and turn the
oven off.
• Delayed start cooking time – You can combine the
cooking time and stop cooking time to switch the oven
on and off at a specific time during the day.
NOTE: Your touch control clock only operates with your
main oven.

WMAN_541_Jun10.indd 9 4/6/10 10:18:30 AM