User manual

6
OPERATION
2. Shelves and trays
The shelves are designed so that they have maximum travel
but cannot be accidentally pulled right out. The trays are
designed the same way and fit straight into the side racks.
• Locate the rear edge of the shelf/tray in between 2 guide
rails of the side rack - see diagram. Ensure the same rail
positions on both sides of the oven are being engaged.
• With the front edge raised, begin to slide the shelf into
the oven.
BEFORE OPERATING YOUR APPLIANCE FOR THE
FIRST TIME
• Once the detents have passed the front edge of the side
rack, the shelf can be pushed completely in.
• When fully inserted the shelf/tray should not interfere with
the closed oven door.
• To insert the grill tray in a separate grill underbench
(GGR475 model), fully open the grill drawer and position
the tray so that the slots on the outer edges fit on the tabs
on the slides.
Separate grill underbench
(GGR475)
WMAN_GASBIO_Jun11.indd 6 14/07/11 3:24 PM