Full Product Manual

Westinghouse Portable Power | 11
FEATURES
CONTROL PANEL FEATURES IGEN2500
120-Volt, 20-Amp Duplex Outlet (NEMA 5-20R): The
outlet is capable of carrying a maximum of 20 amps.
USB Duplex: 5V DC that come in 1 amps and 2.1 amps.
Reset Breaker: If the inverter is overloaded, the reset breaker
will trip. The engine will continue to run, but there will be no
output from the inverter. Unplug the devices and reduce the
load. Push in the reset breaker to reset it.
Eciency Mode Switch: When turned to the ON position, the
engine will sense the load needed and run at a slower RPM to
save fuel.
Ground Terminal: The ground terminal is used to externally
ground the inverter.
Fuel Control and Choke Switch: Turn position to CHOKE to
start the engine, and turn to RUN position once the engine is
running. Switch to OFF to stop inverter.
LED Data Center: Indicates low oil, overload and output ready.
Displays fuel level, power output percentage, run time, and
lifetime run hours.
1
2
3
4
5
6
7
1
2
3
6
4
7
5
CONTROL PANEL FEATURES IPRO2500
120-Volt, 20-Amp Duplex GFCI Outlet: The
outlet is GFCI with a Reset and Test button. It is capable of
carrying a maximum of 20 amps.
USB Duplex: 5V DC that come in 1 amps and 2.1 amps.
Reset Breaker: If the inverter is overloaded, the reset breaker
will trip. The engine will continue to run, but there will be no
output from the inverter. Unplug the devices and reduce the
load. Push in the reset breaker to reset it.
Eciency Mode Switch: When turned to the ON position, the
engine will sense the load needed and run at a slower RPM to
save fuel.
Ground Terminal: The ground terminal is used to externally
ground the inverter.
Low Oil LED: Indicates low oil level.
Overload LED: Indicates that the inverter is overloaded.
Output Ready LED: Indicates the inverter is ready to be used.
Fuel Control and Choke Switch: Turn position to CHOKE to
start the engine, and turn to RUN position once the engine is
running. Switch to OFF to stop inverter.
1
2
3
4
5
6
7
8
9
1
2
3
9
4
5
7 8
6