Full Product Manual

Westinghouse Portable Power | 9

Control Panel: Contains the reset breaker,

outlets and warning lights.

Spark Plug Access Cover: Remove the cover

to service the spark plug.

Recoil Handle: Pull to start the engine.

Engine/Fuel Control Switch: Turns the engine

and the fuel on and o.

120-Volt, 20-Amp Duplex Outlet (NEMA 5-20R): The

outlet is capable of carrying a maximum of 20 amps.

USB Duplex: 5V DC that come with 1 and 2.1 amp rating.

Reset Breaker: If the inverter is overloaded, the reset breaker

will trip. The engine will continue to run, but there will be no

output from the inverter. Unplug the devices and reduce the

load. Push in the reset breaker to reset it.

Eciency Mode Switch: When turned to the ON position, the

engine will sense the load needed and run at a slower RPM to

save fuel.

Ground Terminal: The ground terminal is used to externally

ground the inverter.

Output Ready LED: Indicates the inverter is ready to be used.

Overload LED: Indicates that the inverter is overloaded.

Low Oil LED: Indicates low oil level.

FEATURES

BASIC INVERTER FEATURES IGEN1200

CONTROL PANEL FEATURES IGEN1200

Fuel Cap and Vent: Open the vent to run the

engine and close the vent when the engine is o.

Engine Service Panel: Remove the panel to

access the engine for maintenance.

Muer and Spark Arrestor: Avoid contact

until the engine is cooled down. The spark

arrestor prevents sparks from exiting the

muer. It must be removed for servicing.

7 8