Table of Contents IMPORTANT PRODUCT SAFETY INSTRUCTIONS ...................................................................... 2 CLEANING THE LCD DISPLAY................................................................................................................. 4 SAFETY GUIDELINES ............................................................................................................................... 5 FCC COMPLIANCE STATEMENT ......................................................................
IMPORTANT PRODUCT SAFETY INSTRUCTIONS Read carefully and follow all warnings and instructions in this User's Manual and those marked on the product before you operate your Monitor. Failure to follow warnings can result in personal injury or damage to product. Keep this User’s Manual in a convenient location for future reference. Proper Positioning of Monitor Always handle your LCD Monitor with care. Avoid touching the LCD screen. Skin oils are difficult to remove.
To assure proper ventilation, do not block the openings by placing the product on a bed, sofa, rug or other similar surface. Do not place the product in a built-in installation, such as a bookcase or enclosed rack, unless proper ventilation is provided. Other Notices and Precautions Caution: Never remove the rear cover. There are no user serviceable parts inside. Your LCD display contains high-voltage parts. You may be seriously injured if you touch them. Do not attempt repairs yourself.
Cleaning the LCD Display • • MAKE SURE THE LCD DISPLAY IS TURNED OFF NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
Safety Guidelines Warning: This device must be operated with the original power supply, part number: ADP-60CF A. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below: USA.................UL Switzerland ..... SEV Canada.............CSA Britain ............. BASE/BS Germany..........VDE Japan ........
Installation Congratulations on your purchase of a Westinghouse 17” LCD Monitor. Sleek and practical, this lightweight and wall-mountable LCD Monitor delivers a crisp and clear display optimized for 1280 x 1024 display resolution. Package Contents LCD Monitor includes: • • • • LCD Display LCD Base Stand Attachable Cables o DC Power Adapter Supply o AC Power Adapter Cord o VGA (HD15) Male – Male Cable o 3.
OSD Menu Functions All the function settings for your LCD Monitor are controlled via the control keys located on the bottom part of the front panel. To display the OSD main menu, press the “Menu” keypad button on the control keys. Note: The OSD menu display will disappear automatically approximately 10 seconds, if no action is taken. The LCD Monitor has been adjusted to optimal settings before shipment. Adjustments of the monitor can be made via the OSD menus and navigation using the keypad buttons.
OSD Menus Image Sub-Menus Description and Function of operation Brightness Contrast Clock Phase H. Position V. Position Sharpness Audio Color Adjust the brightness of the screen. Adjust the contrast of the image. Adjust the clock pulse of the image. Adjust the focus of the image. Move the image left and right on the screen. Move the image up and down on the screen. Adjust the picture sharpness of lower resolutions. Volume Adjust the volume of the audio. Mute Set up the audio to be mute on or off.
Direct Control – Keypad Buttons Display Modes Pressing the Turbo button on the control keys will result in placing the LCD Monitor into a unique display mode. There are 3 modes that the user can select. Economy, Text and Picture. To toggle between these modes press the Turbo key again until the mode you desire is selected. These modes automatically change the backlighting levels between bright, brighter and brightest.
Image not Displayed Input Source Not Found If there is no source connected to the Input selected.
Appendix Specifications Panel Type 17" Color TFT LCD Optimum Resolution 1280 x 1024 Response Time 14 ms Contrast Ratio 350:1 Maximum Brightness 350 Nits Viewing Angles 160° (H) / 140° (V) Color Saturation 72% TBD Wall/Arm Mount Physical 75mm VESA® Input Signal Video HD-15 pin mini D-Sub (VGA connector) Audio 3.5mm Mini-Stereo jack male-male Built-in audio amplifier and speakers, 2.5 watts * 2 channels Speaker Output Power Voltage 100-240 VAC, 50/60 Hz (auto switch), 1.
Troubleshooting No power • • • Make sure DC cord is plugged into the back of the LCD Monitor. Make sure AC power cord is securely connected to the AC socket Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage No Image • • Make sure power button is ON. Check whether the LCD monitor and computer power cords are plugged in and whether there is a supply of power.
How do I find more help? • • www.westinghousedigital.com Contact customer service at (866) 287-5555 or service@westinghousedigital.
