USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LCM-17v8 LCD Monitor Moniteur LCD Monitor LCD www.westinghousedigital.
Table of Contents SAFETY GUIDELINES ............................................................................................................................... 2 FCC COMPLIANCE STATEMENT............................................................................................................... 2 CLEANING THE LCD MONITOR ............................................................................................................... 3 FEATURES.............................................................
IMPORTANT PRODUCT SAFETY INSTRUCTIONS Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords and each end of the cords for damage. The LCD Monitor shall be installed near a wall socket outlet and the plug on power cord shall be readily accessible.
Safety Guidelines IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The specific power cord for this LCD Monitor is enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed.
Cleaning the LCD Monitor MAKE SURE THE LCD MONITOR IS TURNED OFF NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
FEATURES English • Bright Display Image • Lightweight • Fast Response Time • Stereo Speakers • Power Saver • Kensington Security Lock Compatible • Safety Certifications Power Saver A power control system, Power Saver, is installed inside the LCD monitor. If the LCD monitor has not been used for a certain period of time, the system will turn the LCD monitor to low voltage mode to save electrical power.
INSTALLATION Package Contents Your product package includes: • 17” Westinghouse LCD Monitor • Detachable Base Stand • AC Power Cord • VGA (HD15) Male – Male Cable • 3.5 mm Male – Male Stereo Audio Cable • User’s Manual • Warranty Card 5 English Congratulations on your purchase of a Westinghouse 19” LCD Monitor. Sleek and practical, this lightweight and wall-mountable LCD monitor delivers a crisp and clear display optimized for 1280 x 1024 display resolution.
Front View of the LCD Monitor 7 1 7 2 1. Turbo/▲ 2. Auto/▼ 3 4 5 6 • • Switch between picture, text and economy modes. Move a selection up when the OSD is displayed. • Automatically optimize positions, phase, and clock when the OSD is not displayed. Move a selection down when the OSD is displayed. Quick contrast adjustment or decrease contrast/brightness. Move a selection left when the OSD is displayed. 3. /W • • • 4. /X • • Quick brightness adjustment and increase contrast/brightness.
Rear View of the LCD Monitor English 1 4 5 2 3 1. AC IN (Power) 2. Audio-IN 3. DVI-D 4. D-SUB (VGA) 5. Lock Hole • Connect the power cord from AC IN to a power source. • Using the cable provided, connect to the Audio out (Green) from a computer. • Using a 24-pin DVI cable, connect to a computer or other device with a DVI output. • Use the enclosed 15-pin VGA cable, connect to a computer or other device with a VGA output. • For use with Kensington security locks.
Installation Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in and snap into place. To remove the base stand, press the tabs on the bottom of the stand neck and remove the base. 2. Connect Audio and Video Cables to a PC Connect one or all of the following into the back of the LCD Monitor IMPORTANT: Before beginning, make sure all devices are turned off. AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO-OUT port to the AUDIO-IN port on the LCD Monitor.
3. Connect Power Cables 4. Turn the Power On Press the power button on the front of the LCD monitor. The LED light will turn blue if a signal input is detected or it will be orange if no input is detected. 9 English Connect the AC power adapter cord to the LCD Monitor (to the connector labeled “AC-IN”) and then connect the female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet.
Mounting the Monitor on a Wall 10 English 1. Remove the base from the LCD monitor. 2. Remove the plastic covers and screws to remove the LCD monitor stand neck. 3. Use the 100mm VESA hole pattern on the back of the monitor to secure a Westinghouse Décor Wall Mount to the monitor and mount it on a wall.
OSD Menu Functions The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to the monitor settings can be made using the OSD menu. • • • • • • • button to display the OSD. Press the “Menu” Press the ▲ or ▼ button to select the function to be adjusted. Press the X button to access the function to be adjusted. Press the ▲ or ▼ button to select the sub-function to be adjusted. Press the W or X buttons to change the current setting of the sub-function.
Image Menu English Function Description Brightness Adjust the brightness of the screen. Contrast Adjust the contrast of the image. Sharpness Adjust the picture sharpness of low resolution pictures. Clock Adjust the LCD monitor clock. (Optional) Phase Adjust the LCD monitor phase. (Optional) H. Position Move the image left or right on the screen. (Optional) V. Position Move the image up or down on the screen.
Audio Menu English Description Function Volume Adjust the volume of the audio. Mute Disable the audio.
Color Menu English Description Function Color temp User/9300K/7500K/6500K/sRGB Red Adjust red color. Green Adjust green color. Blue Adjust blue color.
Misc Menu English Description Function Language English, Français, Italiano, Deutsch, Español, 日本語, 简体中 文, 繁體中文, Русский, 한국어 OSD time-out Adjust OSD display time setting. OSD position Move OSD display position to any one of the following 5 positions within the overall screen. 1 2 3 4 5 Reset Restore LCD monitor to factory settings. Input Select Analog / Digital Auto setting Adjust clock, phase and positions automatically. (Optional) CM Engine Color Management Engine.
Info Menu English Description Function Resolution Displays resolution. Horizontal frequency Displays horizontal frequency. Vertical frequency Displays vertical frequency.
Quick Adjustments • Brightness: Press the • Contrast: Press the • Auto Setting: Press the Auto button when the Menu is not displayed. • Turbo: Press the Turbo button when the Menu is not displayed to switch between picture modes. Brightness button when the Menu is not displayed. Contrast button when the Menu is not displayed.
Display Modes 1. Economy Mode – Reduced brightness 2. Text Mode – Normal 3. Picture Mode – High brightness NOTES: • • • Changing to a lower brightness mode can lessen eye fatigue. Change from Picture Mode to Text Mode when working with text. Change from Text Mode to Economy Modes when viewing the screen for long periods. 18 English The monitor backlighting can be controlled by using the Turbo button on the control keypad. There are 3 modes: Economy, Text, and Picture.
Appendix Specification Item Panel Size Type 17” Color TFT Active Matrix LCD. Optimum Resolution 1280 x 1024 Response Time 8 ms Contrast Ratio 450:1 Maximum Brightness 300 Nits (typ.) Viewing Angles 150° (H) / 130° (V) Anti-static and hard coated. Wall/Arm Mount Physical Directly wall mountable 100mm VESA® Input Signal Video HD-15 pin mini D-Sub (VGA connector) 24 pin DVI-D Audio 3.
Troubleshooting No Image • Make sure the power button is ON. • Check whether the LCD monitor and computer power cords are plugged in and check the power supply. Power is ON but No Screen Image • Adjust the brightness and contrast levels. • Make sure the VGA or DVI cable is securely connected to both the computer and monitor. “Out Of Range” • Check the computer image output resolution and frequency and compare the value with the preset values of the computer’s graphics card.
Troubleshooting (cont.) • Perform Auto Adjust • • Adjust the horizontal and/or vertical position using the OSD. Check image size setting. Colors are Not Correct • Adjust the color setting using the OSD. No Sound • Check the audio connection. Mounting the LCD Monitor on a Wall • Check the Westinghouse Digital website for wall mounting solutions. • Use the 100mm VESA hole pattern to secure a mounting plate to the LCD monitor. • Use professional installation to reduce the risk of injury and damage.
USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LCM-17v8 LCD Monitor Moniteur LCD Monitor LCD www.westinghousedigital.
