Table of Contents IMPORTANT ANIENNA PRODUCT SAFETY INS'IALLAHON SAFELY INSTRUCTIONS .................................................................... ....................................................................................................... 2 4 CLEANINO _HE LCD DISPEAY ............................................................................................................. 4 SAFETY .............................................................................................
IMPORTANT PRODUCT INSTRUCTIONS SAFETY Read carefully and follow all warnings and instructions in this User's Manual and those marked on the product before you operate your television. Failure to follow warnings can result in personal injury or damage to product. Keep this User's Manual in a convenient location for future reference. Proper Positioning of Television Always handle your LCD television with care. The product can be heavy and bulky, requiring the assistance of a second person to move.
To assure proper ventilation, do not block the openings by placing the product on a bed, sofa, rug or other similar surface. Do not place the product in a built-in installation, such as a bookcase or an enclosed rack, unless proper ventilation is provided. Other Notices and Precautions Caution: Never remove the rear cover. There are no user serviceable parts inside. Your LCD display contains high-voltage parts. You may be seriously injured if you touch them. Do not attempt repairs yourself.
Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Safety Guidelines Warning: This device must be operated with the original power supply, part number: ADP-60CF A. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below: USA ................. UL Switzerland ..... SEV Canada ............. CSA Britain ............. BASE/BS Germany .......... VDE Japan ..
Installation Congratulations on your purchase of a Westinghouse 17" LCD TV display. Sleek and practical, this lightweight and wall-mountable LCD TV delivers crisp and vibrant video, doubles as a superb SXGA computer monitor. Your new Westinghouse 17" LCD TV acts as your television, but also your computer monitor--making it a practical solution spaces in the office, bedroom, or kitchen. Watch television, play video games, e-mail, the Internet.
2. Attach Base Stand to LCD TV Attach the Base Stand to the LCD TV stand neck. into place.
3. Connect Connect video Antenna, Cable, Video, S-Video, and audio cables from compatible devices and/or YPbPr Cables to the back panel of the LCD TV. J / f \ \
4. Connect power cables Connect the DC power adapter cord to the LCD TV and then connect the female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet. DC Power Plug Input 5. Turn Power On Press the power button on the front of the LCD TV display or on the remote control. will turn blue if signal input is detected, orange if no signal.
6. Programming TV Channels 1. Select TV as the input using the TV button on the remote. 2. Push Menu Menu. 3. Move using the Tuner Menu. , , button and bring up OSD Display / arrow keys to select the TV Using the / arrow keys or the MENU key, step down into the menu and highlight the Auto scan function. Push _ arrow key and Channel Scan will commence. Once completed, C.
Controls & Connections This section describes the front panel controls, and remote control in more detail. Front View of the Product Use the buttons on the front panel control to display and adjust the On Screen Display (OSD). The OSD controls are explained at the bottom of the page and are defined in the "OSD Funct'ons' section. Speaker IR Receiver Control keys are shown in detail below Button Mode ' TV Source Display input menu.
Remote Control The Remote Control should be used within 5 meters of the LCD TV. 1. POWER 18.TV Set source to TV tuner Switch the power between on & off 2. SLEEP 19.Analog Push to select PC VGA source Use to shut off TV after a period of time 20.DISPLAY 3. MTS 4. Multi-language, stereo and mono selection MUTE Switch the sound between on & off Display the channel information 21.PREV. CH Recall the previous channel 5. CHANNEL NUMBER KEY 0-9, 100 Direct channel selection by number 6.
In put/ The input and PC display mode allows the user to select the source by depressing the input button and cycling through each source, selecting menu on the remote will select the source. Display Modes Pressing th_ Inn= Jt/_ _ h= 1finn an th_ nnntrnt k_v£ fnr mnr_ than ? £_nnnrl£ will r_£111t in nlnninn the LCD TV into a unique display mode. There are 3 modes that the user can select. Economy, Text and Picture.
OSD Functions This section describes each on-screen display (OSD) command. There are different menus depending on whether you are in TV mode or Analog PC mode. OSD All the function settings for your LCD TV display are controlled either via the remote control or using the control keys located on the bottom right of the front panel. To display the OSD main menu, press the Menu button on the control keys or the MENU key on the remote control.
Audio Adjustment Menu Selecting this menu and using the are selected in the OSD menu. : OSD Language ; ; ; / arrow keys will change the values of the functions that ; ; Menu Selecting this menu and using the / arrow keys will change used for the OSD menus. There are 90SD menu languages the language available.
TV Channel Scanning Menu Selection of this menu provides for the scanning of the antenna input source in order to tune in channels. Using the_! arrow keys will toggle between the yes and no selections. To add/delete a channel move to the Status selection and toggle between off and on. Function Name input source.
Black Level OSD Time-out OSD Position Antenna/CATV Sets the backlight level of the LCD TV - Default value is 50 Sets the time in seconds that the OSD menu is displayed. Default value is 10 seconds. Range from 0 - 60 seconds. Sets the position of the OSD menus on the display. Default is 1 which is upper left corner. Input Menu Selecting this menu chooses the source when tuning the TV.
V-Chip and Parental Control Menu To access the PARENTAL CONTROL menu press the V-Chip control. Enter the Pin Code (default is 0000). button located _1______ Tn nh_nn_ th_ Pin _.
MOVIE Rating Menu Set the Movie Ratings to block selected Movie channels. U - Unblock, B - Block.
PIP function Menu PiP is available in Analog mode only. When depressing the PIP button on the remote control the following menu appears. Pressing the PIP button again will toggle the PIP function on/off. Use either the Menu key or the / arrow keys to navigate within the menus. The BACK key on the remote control or Exit button on the control key will allow you to back out of the OSD menus. Using the Right Arrow Key moves to the following OSD Menu.
Usingthe RightArrow Key moveto the followingOSD Menu. Select the Audio source. ChoosebetweenAnalog sourceLine in or PIP audiosource. Which could be the TV, AV1, SVideo or YPbPr audio source. Main PC OSD Menu in Analog Mode To display the OSD menu, press the Menu button on the control keys or the MENU key on the remote control. Use either the Menu key or the / arrow keys to navigate within the menus. I lit:::: / _ItlUVV I%t:yb CIIt: UbL;:U LU bll_llly't:_ Lilt:::: V_lUtC:b OSD menu.
PC OSD Menus Please refer to the TV Navigational Menus which are similar to the following PC menus. When pressing the screen. the MUTE Selecting this Menu RGB levels.
PC OSD Menu Language Selection Choose from 9 different languages. OSD Time-out, Default mode functions. ©SD Selection positioning. of the Input Source Menus Auto Setting between Off/On Analog, and Recall feature. AVl, S-Video, YPbPr Similar and TV.
Input Source not found or Out of Range If there is no source connected to the Input selected. TV, AVl, Component) or Analog.
Appendix Specifications Panel Size/Type 17" Color TFT LCD. Anti-static and hard coated. Native/Optimum 1280xl 024 Resolution Aspect Ratio 5:4 Response 14ms Contrast Time Ratio 350:1 Maximum Brightness 350 cd/m Viewing Angle Horizontal: 160° Vertical: 120 ° Display Colors 16.2 million colors Active Display Area 337.9 mm(H) x 270.
Troubleshooting No power • • • Make sure DC cord is plugged into the back of the LCD TV.
