USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LTV-27w7 HD LTV-32w6 HD LTV-37w2 HD Widescreen HDTV TVHD à Écran Géant TVHD Pantalla Grande www.westinghousedigital.
Contents INSTALLATION Package Contents………………………………………………………….6 Front View of the LCD TV…………………………………………………6 Rear View of the LCD TV………………………………………………….6 Side View of the LCD TV…………………………………………………..7 Input connectors of the LCD TV…………………………………………..8 Remote Control………………………………………………………….....9 Installation………………………………………………………………….
English Cleaning the LCD TV • • MAKE SURE THE LCD TV IS TURNED OFF NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
PRODUCT SAFETY INSTRUCTIONS Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords and each end of the cords for damage. The LCD TV shall be installed near a wall socket outlet and the plug on power cord shall be readily accessible.
Antenna Installation Safety Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use the LCD TV near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Safety Guidelines WARNING: This device must be operated with the original power supply, part number LT32B-2-ES. IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The specific power cord for this LCD TV is enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed.
INSTALLATION This User Manual covers models: English LTV-27w7 HD, LTV-32w6 HD and LTV-37w2 HD Package Contents Your product package includes: • Westinghouse LCD TV • Remote Control (with batteries) • Power Cord • Quick Connect Guide • User’s Manual • Warranty Card Front View of the LCD TV Speakers IR receiver Rear View of the LCD TV 6
Side View of the LCD TV Control keys Control Key MENU 1. Menu Turn OSD Menu ON/OFF + VOL - 2. Volume + / - Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu + CH - 3. Channel + / - Channel up/down when input is TV or highlight a control while in the OSD Menu INPUT 4. Input source Select Active Video Input or choose a selection while in the OSD MENU 5.
Input connector 2. Video Input Connect the Composite Video to a legacy video device such as a VCR or video game system. 3. Video & S-Video Audio Input (Right / Left) Connect an external audio source to this jack (Audio (R/L). connection supports either S-Video or Video input. This 4. SPDIF Output Connect this output to an external stereo audio amplifier, receiver or surround sound processor with SPDIF Input. 5.
Remote Control English 1. POWER : Switch the power On/Off 2. SWAP : Swap Main/Sub screen picture on PIP or POP. 3. PIP : Turn the PIP mode On/Off. 4. Mute : Turn the Sound On/Off. 5. Sleep: Set Sleep Timer to Turn Off. 6. CC: Close Caption On/Off. 7. Backlight: Backlight control. 8. Favorite : 3 Favorite keys (A;B;C) for NTSC and ATSC mode.
English 18. Enter : Execute a command. 19. INFO : Display the source and channel information 20. EPG : Electronic program guide for HDTV. 21. TV: Select TV source input. 22. HDMI: Select HDMI source input. 23. PC : Select VGA source input. 24. YpbPr1: Select YPbPr1 source input. 25. DVI: No function Select DVI source input *For models with DVI input 26. S-video: Select S-video source input. 27. AV: Select AV source input. 28. YpbPr2: Select YpbPr2 source input.
Installation 1. Insert Remote Control Batteries 3) Re-attach the battery cover. CAUTION: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to (+) and (−) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Dispose of used batteries in accordance with local laws and regulations.
Connect one or all of the following into the back of the LCD TV. IMPORTANT: Before beginning, make sure all devices are turned off. VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to the LCD TV VGA IN port. AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO OUT port to the AUDIO IN port on the LCD TV. 3. Connect Video, S-Video, YPbPr, Antenna/Cable to Video Devices Connect Video/Audio cables from compatible devices to the back panel of the LCD TV. 12 English 2.
4. Connect power cables 5. Turn Power On Press the Power button on the right side of the LCD TV, or press the Power (Red) button on the remote control. 6. Select input source for the LCD TV using the OSD menu or remote control 7. If connecting to Antenna, Cable or other RF source on TV Inputs: See page 17 to auto scan and edit available channels. 8. If connecting to a PC (VGA): For the best picture quality, set the timing mode of you computer to 1360 x 768 at 60Hz.
Function adjustment: To display the OSD main menu, press the Menu button on the right side of front control keys of the LCD TV or the MENU key on the remote control. Press ▼/▲ arrow keys to select desired OSD Menu and 3/4 arrow keys to select desired OSD sub-menu.
DISPLAY SETTING: English Function Name MAIN SOURCE PIP SOURCE ASPECT RATIO PIP MODE SWAP PIP SIZE PIP POSITION AUDIO FROM Table 1: SUB Function Select main screen sources: “TV”,”HDTV”, ”VIDEO”, ”S-VIDEO”, ”YPbPr1”, ”YPbPr2”, “VGA”, “HDMI” Select sub screen sources Select “STANDARD”, ”FILL” Select “OFF”, ”PIP”, ”PBP”, ”POP”. Swap main screen and sub-screen source. Sub screen display size adjust (“SMALL”, ”MEDIUM”, ”LARGE”) Sub screen display horizontal /vertical position adjustment.
AUDIO SETTING: English Function Name BASS TREBLE BALANCE MTS MUTE SPEAKER AUDIO OUT RESET Function Bass adjustment Treble adjustment Balance adjustment Select STEREO, MONO, or SAP Select audio “OFF” or “ON” Select “internal”, “external”, or “Both” speakers Select SPDIF OUT for 2.1 channel or 5.
TV/HDTV SETTING: English Function Name TV SYSTEM AUTO SCAN CHANNEL EDIT LOCAL TIME DAYLIGHT SAV Function CABLE STD → CABLE IRC → ANTENNA Select “NO” or “YES” Select “ADD” or “DELETE” Select local time: “CANADA”, “EASTERN”, “CENTRAL”, “MOUNTAIN”, “PACIFIC”,”ALASKA”,“HAWAII”, “SAMOA”, “NEWFOUNDLAND” Day light saving: On mode: “daylight saving “ times to begin Off mode: “daylight saving “ is over 17
PARENTAL CONTROL: The parental controls feature prevents viewers from watching programs that are not age-appropriate, such as programs containing violence or adult language. English Function Name PASSWORD TV PG RATING MPAA RATING Function The factory default password is “0000”. Use remote control to key in the number and enter the parental controls sub-menu. Select “TV-MA”, “TV-Y”, ”TV-Y7”, ”TV-G”, ”TV-PG”, ”TV-14”, ”TV-MA” or “OFF”.
GENERAL SETTING: English Function Name TRANSPARENCY MENU POSITION SYSTEM INFO CLOSED CAPTION LANGUAGE SLEEP TIMER MENU TIMEOUT BACKLIGHT NEXT PAGE POWER ON PLUG LED SET FACTORY RESET PREVIOUS PAGE Function Set OSD transparency level OSD horizontal/vertical position adjustment Display input source, type and signal Turn the closed caption OFF or CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4 OSD language selection Set sleep timer to turn off the power automatically Set the time to turn off the OSD Backligh
LTV-27w7 HD LCD TV Specifications Model Name Type Color 170° (H) / 170° (V) Viewing Angles Input Signal Video/Audio VGA Analog * 1 (75 ohms, 0.
LTV-32w6 HD LCD TV Specifications Model Name Type Color 170° (H) / 170° (V) Viewing Angles Input Signal Video/Audio VGA Analog * 1 (75 ohms, 0.
LTV-37w2 HD LCD TV Specifications Model Name Type Viewing Angles Input Signal Video/Audio VGA Analog * 1 (75 ohms, 0.
No Power • • • Make sure power button is ON (Blue LED ). Make sure AC power cord is securely connected to the AC socket. Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Parental Control Password is “Lost” • In the unlikely occurrence, select “ PASSWORD EDIT” and enter “0000” to reset the password. Audio Interconnection Issues • Remember that S-Video and Composite (AV) share the same audio source.
Remote Control Does Not Work • • Make sure batteries are inserted correctly. Replace batteries with new ones if necessary. • Purchase a separate “learning” remote control. Image Quality Issues • For the best TV image quality, “Standard Definition” TV should be viewed in 4:3 format. How Can I Find More Help? • • Log on to: www.westinghousedigital.com Contact Westinghouse Customer Service at (866) 287-5555 or write us at service@westinghousedigital.
USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LTV-27w7 HD LTV-32w6 HD LTV-37w2 HD Widescreen HDTV TVHD à Écran Géant TVHD Pantalla Grande www.westinghousedigital.
