USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LVM-37w3se 1080p Monitor Moniteur 1080p
CONTENTS English Contacting Westinghouse Digital • • Log on to: www.westinghousedigital.com Contact Westinghouse Customer Service at (866) 287-5555 or write us at service@westinghousedigital.com Owner’s Record The model and serial numbers are located @ the back of the Monitor. Keep a record of the numbers in the spaces provided below. Ref to them whenever you call upon your Westinghouse Digital dealer regarding this product. Model No.____________________________ Serial No.
CONTENTS 2. INSTALLATION PACKAGE CONTENTS........................................................................4 FRONT VIEW OF THE 1080PMONITOR ................................................5 REAR VIEW OF THE 1080P MONITOR .................................................5 SIDE VIEW OF THE 1080P MONITOR ..................................................6 REMOTE CONTROL...........................................................................7 INSTALLATION ..............................................
1 PRODUCT SAFETY English 1
1 PRODUCT SAFETY Safety Guidelines WARNING: This device must be operated with the original power supply, part number FSP273-4F01. IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The specific power cord for this 1080p monitor is enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed.
1 PRODUCT SAFETY Product Safety Instructions Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
2 INSTALLATION Package Contents 4 English Your product package includes: • 37” Westinghouse LCD 1080p Monitor • Remote Control (with batteries) • Power Cord • User’s Manual • Quick Connect Guide • Warranty Card
2 INSTALLATION Front View of the 1080p Monitor Power Indicator “IR” Receiver Speakers Rear View of the 1080p Monitor 5 English Use the buttons on the right side of the 1080p Monitor or the buttons on the remote control to display the On Screen Display (OSD) menu and adjust the options. The OSD controls are defined in “OSD Functions” on page 16.
2 INSTALLATION Side View of the 1080p Monitor English 1. Menu Turn OSD Menu On or Off 2. Volume + / - Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu. 3. T/S ( OSD Selection) Highlight a control while in the OSD Menu. 4. Input Select active video input or choose a selection while in the OSD menu. 5.
2 INSTALLATION SIDE CONNECTORS 1. HDMI Connect to an external HDMI device such as a cable/satellite receiver or DVD player. 2 3 4 5 6 7 2. DVI (HDCP) / Audio (Left / Right) Connect to an external DVI-HDCP device such as a DVD, cable/satellite receiver, or computer. 3. S-Video Connect to an external video device such as a VCR. 4. AV Video Connect the composite video to an external video device such as a VCR. 8 5. S-Video & AV Audio (Left / Right) Connect an external audio source to this jack.
2 INSTALLATION Use the Remote Control to adjust your Westinghouse 1080p Monitor. Switch to DVI1 source 24. Video: Switch directly to Video source 25. S-Video: Switch directly to S-Video source 1 2 3 4 5 6 7 8 10 9 11 12 13 14 16 15 8 17 18 19 20 21 22 23 24 23 25 English 1. POWER: Switch the power on/off 2. MUTE: Turn the sound on/off 3. PIP: Display Picture-In-Picture 4. SWAP: Switch PIP between main and sub-screen pictures 5. BACKLIGHT: Shortcut to backlight adjustment 6.
2 INSTALLATION Installation 1) Remove the battery cover. 2) Insert the batteries corresponding to the (+) and (−) marks on the battery compartment. 3) Re-attach the battery cover. CAUTION: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to (+) and (−) markings.
2 INSTALLATION 2. Connect the 1080p Monitor to a computer Connect a VGA or DVI cable and an audio cable to the back of the 1080p Monitor. VGA CONNECTION: Connect an analog VGA cable from your computer VGA OUT port to the 1080p Monitor VGA IN port. Connect a stereo mini cable from the computer’s AUDIO OUT port to the VGA AUDIO IN port on the 1080p Monitor. DVI CONNECTION: Connect a Digital DVI cable from your computer to the 1080p Monitor DVI port. Using a 3.
2 INSTALLATION English 5. Turn on your computer The 1080p Monitor will auto adjust to the resolution of the computer. For the best picture quality, set the PC timing mode to 1920 x 1080 at 60Hz, then turn off and reboot the computer. Refer to your computer’s graphic card user guide for questions on how to set this timing mode. 6.
3 OSD FUNCTION On-Screen Display (OSD) Function Main Menu Using the main menu, you can adjust the Picture, PC, Audio, PIP, and General Setting parameters. To select a sub-menu option, use the ▲/▼arrow keys on the right side of the 1080p monitor or on the remote control. Then use the 3/4arrow keys to adjust the sub-menu setting. Finally, press the Menu button on the side of the 1080p monitor or the Exit button on the remote control to exit the OSD menu.
3 OSD FUNCTION Picture English Function Name 1. Brightness 2. Contrast 3. Saturation 4. Hue 5. Color Temp 6. Sharpness 7. Aspect Ratio 8. Backlight 9. Reset Function Adjust the black level of the display. Adjust the white level of the display. Adjust the intensity of the colors. Adjust the color towards either red or green. Color temperature adjustment (Warm, Normal, Cool) Adjust the clarity of the picture.
3 OSD FUNCTION PC Parameters (VGA Only) English Function Name 1. Auto Adjust 2. Clock 3. Phase 4. Position Function Automatically re-centers the image to the middle of the screen by synchronizing both vertical and horizontal refresh rate and resolution. Clock adjustment Adjust the Phase control to eliminate horizontal streaking. Adjust the horizontal and vertical position of the screen image.
3 OSD FUNCTION Audio English Function Name 1. Volume 2. Bass 3. Treble 4. Balance 5. Mute 6. Speaker 7.
3 OSD FUNCTION Picture-in-Picture English Function Name Function Select display options: Off, PIP, PBP, POP Select main screen source: VGA, HDMI, DVI, AV, S-Video, YPbPr1, YPbPr2 Select PIP sub-screen source: VGA, HDMI, DVI, AV, S-Video, YPbPr1, YPbPr2 Swap main screen and sub-screen source Sub-screen display horizontal/vertical position adjustment Adjust sub-screen display size: Small, Medium, Large Select main screen or sub-screen audio source: Main, Sub 1. Display Mode 2. Main Source 3.
3 OSD FUNCTION General Settings English Function Name 1. Menu Position 2. Menu Timeout 3. Menu Language Function OSD Menu horizontal/vertical position adjustment Set the amount of time before the OSD disappears. • 10 seconds • 30 seconds • 60 seconds Select the OSD language: English, French, Spanish Set the monitor to turn off after a specified amount of time: Off, 30 minutes, 60 minutes, 120 minutes 4. Sleep Timer 5. Autosource™ 6. DPMS 7 System Info 8. LED 9.
4 APPENDIX Troubleshooting • • • Make sure the power cord is securely connected to the AC In jack on the back of the 1080p monitor. Make sure the AC power cord is securely connected to the AC socket. Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Power is suddenly turned off • Check if Sleep Timer is set. If so, turn it off. Remote Control Does Not Work • • • Press only one button at a time.
4 APPENDIX Troubleshooting (cont’d) • Remember that the S-Video and Composite AV input share the same audio source. No Sound • • • Check the audio connection. Press MUTE on the remote control, so that MUTE disappears from the screen. Press the Volume + (Up) key on the remote control. . How Can I Find More Help? • • Log on to: www.westinghousedigital.com Contact Westinghouse Customer Service at (866) 287-5555 or write us at service@westinghousedigital.
4 APPENDIX Cleaning the 1080p Monitor MAKE SURE THE 1080p MONITOR IS TURNED OFF NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
4 APPENDIX Specifications Panel LVM-37w3se Type 37" TFT (Thin Film Transistor), Active Matrix LCD, 1920*1080 vertical stripe Color Anti-glare coating 176° (H) / 176° (V) (typ.) Viewing Angles Input Signal Video/Audio RGB Analog * 1 (75 ohms, 0.
www.wde.
