20 pg_W-076_EFS 11/12/04 10:33 AM Page 1 Owner’s Manual Outdoor Lighting Fixture Installation Instructions W-076 042204 Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para futura referencia:
0 pg_W-076_EFS 11/12/04 10:33 AM Page 2 2
20 pg_W-076_EFS 11/12/04 10:33 AM Page 3 ASSEMBLY INSTRUCTIONS FOR OUTDOOR LIGHT FIXTURE Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. Please email questions and comments to: catalogroom@westinghouselighting.com. NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1).
20 pg_W-076_EFS 11/12/04 FIGURE 1. PENDANT MOUNT 10:33 AM Page 4 GROUND WIRE *OUTLET BOX (C) SIDE HOLE (O) WIRE CONNECTORS (M) MOUNTING SCREWS (A) MOUNTING BAR (B) *OUTLET BOX SCREWS (D) HEX NUT (E) GREEN GROUNDING SCREW (N) LOCK WASHER (G) NIPPLE (F) CANOPY (L) CAP NUTS (P) CANOPY LOOP (H) CHAIN (J) FIXTURE LOOP (K) TOP ASSEMBLY (Q) (MAY BE PREASSEMBLED) SCREWS (R) FIXTURE CAGE (I) Line art shown may not exactly match the fixture enclosed.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 5 PENDANT MOUNTING AND WIRING INSTRUCTIONS CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking. NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. 2.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 6 FIGURE 3. FLUSH MOUNT GROUND WIRE *OUTLET BOX (C) WIRE CONNECTORS (M) SIDE HOLE (O) MOUNTING SCREWS (A) MOUNTING BAR (B) *OUTLET BOX SCREWS (D) HEX NUT (E) GREEN GROUNDING SCREW (N) LOCK WASHER (G) CANOPY (L) CAP NUTS (P) TOP ASSEMBLY (Q) (MAY BE PREASSEMBLED) SCREWS (R) FIXTURE CAGE (I) Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 7 FLUSH MOUNT MOUNTING AND WIRING INSTRUCTIONS CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking. NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. 2.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 8 LES INSTRUCTIONS D'ASSEMBLAGE DE L'APPAREIL D'ÉCLAIRAGE POUR UTILISATION EXTÉRIEURE Félicitations ! Vous avez acheté un produit de Westinghouse Lighting. Cet appareil d'éclairage a été conçu pour durer de nombreuses années. Veuillez envoyer vos questions et commentaires par courriel, à l'adresse suivante : catalogroom@westinghouselighting.com NOTA : Déballez soigneusement l'appareil d'éclairage et les pièces.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 9 FIL DE MISE A LA TERRE *BOITE DE SORTIE DE COURANT (C) FIGURE 1.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 10 INSTRUCTIONS DE MONTAGE ET DE RACCORDEMENT NOTA : Underwriters Laboratories (UL) n’exige pas que tous les appareils d’éclairage comportent des fils de mise à la terre. Ces appareils satisfont cependant à toutes les spécifications UL. 1. Mettez l’interrupteur de la boîte de fusibles à « OFF » afin d’éviter le risque d’électrocution. 2. Vissez les vis de fixation (A) dans la barre de fixation (B) d’environ 6 mm (1/4 de po) (voir fig. 1). 3.
20 pg_W-076_EFS 11/12/04 FIGURE 3.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 12 INSTRUCTIONS DE MONTAGE ET DE RACCORDEMENT NOTA : Underwriters Laboratories (UL) n’exige pas que tous les appareils d’éclairage comportent des fils de mise à la terre. Ces appareils satisfont cependant à toutes les spécifications UL. 1. Mettez l’interrupteur de la boîte de fusibles à « OFF » afin d’éviter le risque d’électrocution. 2. Vissez les vis de fixation (A) dans la barre de fixation (B) d’environ 6 mm (1/4 de po) (voir fig. 1). 3.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 13 INSTRUCCIONES DE MONTAJE PARA EL ARTEFACTO DE ILUMINACIÓN PARA EXTERIORES Le felicitamos por comprar este producto de Westinghouse Lighting. Este producto ha sido diseñado para brindarle muchos años de belleza y servicio. Si tiene preguntas o comentarios, por favor envíe un mensaje electrónico a: catalogroom@westinghouselighting.com NOTA: Extraiga cuidadosamente el artefacto y las piezas.
20 pg_W-076_EFS FIGURA 1.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 15 INSTRUCCIONES DE MONTAJE Y CABLEADO NOTA: Underwriters Laboratories (U.L.) no requiere que todos los artefactos tengan cables de tierra. Estos artefactos cumplen con todas las especificaciones U.L. 1. Desconecte el suministro eléctrico en la caja de fusibles para evitar la posibilidad de descarga eléctrica. 2. Enrosque los tornillos de montaje (A) en la barra de montaje (B) aproximadamente 6 mm (1/4 pulg.) (vea la Fig. 1). 3.
20 pg_W-076_EFS 11/12/04 FIGURA 3.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 17 INSTRUCCIONES DE MONTAJE Y CABLEADO NOTA: Underwriters Laboratories (U.L.) no requiere que todos los artefactos tengan cables de tierra. Estos artefactos cumplen con todas las especificaciones U.L. 1. Desconecte el suministro eléctrico en la caja de fusibles para evitar la posibilidad de descarga eléctrica. 2. Enrosque los tornillos de montaje (A) en la barra de montaje (B) aproximadamente 6 mm (1/4 pulg.) (vea la Fig. 1). 3.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 18 FIGURE 2. GROUP A: CONNECT TO BLACK HOUSE WIRE GROUP B: CONNECT TO WHITE HOUSE WIRE BLACK WHITE WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER BROWN, GOLD OR BLACK WITHOUT TRACER BROWN, GOLD OR BLACK WITH TRACER NOTE: When parallel wire (SPT I & SPT II) is used; the neutral wire is square shaped and ridged, and the hot wire will be round in shape and smooth. (See below.
20 pg_W-076_EFS 11/12/04 10:33 AM Page 19 CLEANING AND CARE To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of fixture. Extend-A-Finish Laquer Conditioner, Item#70295, is recommended once a year to clean, condition, and protect fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.
pg_W-076_EFS 11/12/04 10:33 AM Page 20 Westinghouse Lighting Corporation Philadelphia, PA 19154-1099, U.S.A. Westinghouse Lighting Corporation, a Westinghouse Electric Corporation licensee www.westinghouselighting.com “Westinghouse” and “You can be sure...
