User manual

18
OPERATION
OPERATING THE PROGRAMMABLE CLOCK
WARNING
THE CLOCK MUST BE SET TO OPERATE OVEN
GENERAL FEATURES
Your 3 button programmable timer has the
following features:
• Timer – your 3 button programmable timer allows
you to set a countdown time that will beep when
the set time has elapsed.
• Cooking duration – You can set a cooking
duration. A timer will count down the preset
cooking time, beep when the time has elapsed
and turn the oven off.
• End cooking time – you can set a cooking nish
time. A timer will count down the preset cooking
time, beep when the finish time has been reached
and turn the oven off.
• Delayed start cooking time – You can combine
the cooking duration and cooking end time to
switch the oven on and off at a specific time
during the day.
Note: Your 3 button programmable timer only
operates with your oven.
CHANGE THE TIME OF DAY (DAYLIGHT SAVING)
1. Press the “mode” button until the “clock” indicator
I
begins flashing.
2. Press the – or + buttons to change the time. 5 seconds
after the last change, the “clock” indicator
I will
disappear, confirming the time has been set.
SETTING THE TIMER
1. Press the “mode“ button until the “timer” indicator
I
begins flashing.
2. Set the countdown time you want by using the – and +
buttons. 5 seconds after the last change the “timer”
indicator
I will stop flashing, confirming the timer has
been set.
3. To stop the beeper, press any button.
SETTING THE COOKING DURATION
1. Check the clock displays the correct time of day.
2. Set the oven to the desired temperature. The oven
indicator light will glow and the oven will come on.
3. Press the “mode“ button until the “cook time” indicator
I
begins flashing.
4. Set the cooking duration you want by using the – or
+ buttons. 5 seconds after the last change, the “cook
time” indicator
I will stop flashing, and the time of day
will be displayed.
Note: Do not forget to add preheating time if necessary.
SETTING THE COOKING END TIME
1. Check the clock displays the correct time of day.
2. Select the desired oven temperature. The oven
indicator light will glow and the heating source will
come on.
3. Press the “mode“ button until the “end time” indicator
I
begins flashing.
4. Enter the time of day you want to finish cooking by
pressing the – or + buttons. 5 seconds after the last
change, the “end time” indicator
I will stop flashing
and the current time of day will be displayed.
SETTING THE DELAYED START COOKING TIME
1. Program the “cook time” and “end time” as described
in the relevant sections. Once both the “cook time”
and “end time” have been set, the “cook time” and
“end time” indicators will stop flashing and the current
time of day will be displayed.
TO CHECK OR CANCEL SETTINGS
1. To check your settings, press the mode button until the
setting you want is displayed. A red light will flash next
to the mode (cook time, end time etc) that is currently
on display.
2. To cancel “delayed start” press the mode button until
a light flashes next to “end time”.
Press and hold the – button until the clock no longer
reverses (you will hear a beep). If you have left the
temperature knob at a setting the oven will start once
the “end time” light stops flashing.
3. To cancel “cook time” press the mode button until
a light flashes next to “cook time”.
Press and hold the – button until the clock no longer
reverses at “0:00” and you will hear a beep.
This automatically cancels “delayed start”. If you have
left the temperature knob at a setting, the oven will start
once the “cook time” light stops flashing. Because you
have cancelled “cook time” the oven will continue to
heat until you manually turn it off.
ON COMPLETION OF COOKING
The heat source will turn off, the timer will beep and the
“end time” and/or “cook time” indicators will flash.
1. Turn the temperature control to the off position.
2 Press any button to stop the timer from beeping.