Specifications

CI-1 Installation and Operation
P/N 66104700001 Rev. F 1-5
Figure 1-5: CI-1 to Host System Connection
The following general rules apply to all communication cables:
1. Plastic cable clamps and tie-wraps are acceptable. Staples must never be used to secure
communication cables.
2. Communication cables from the CI-1 ports may be bundled together and may share a
common conduit run; however, bundling or sharing conduit runs with cables of other
electrical or electronic devices must be avoided. Bundling should be loose, and conduit sizes
should be as required by the electrical codes.
3. Avoid splicing communication cables. If splicing is unavoidable, maintain as much 'twist' as
possible in the twisted pairs. Protect the splice with shrink tubing to avoid shorts and ground
faults.
Figure 1-6: CI-1 to Single ACU Connection