Specifications

WSE • 3/21/97 16720 — 13 Alto 818 Access Control System
e. Regulatory: N/A (Card is totally passive requiring no approval).
f. Power: Passive-powered by DigiReader digital proximity reader.
g. Communication: Card shall communicate via low power radio frequency, providing read
ranges up to [36] inches depending on the selected DigiReader. (See DigiReader/Prox Card
read range matrix for actual figures)
h. Manufacturer: Westinghouse Security Electronics, Model: DuraKey.
11. Analog Proximity Command Card ([SE 1050] [SE1060]):
a. General: [SE 1050] [SE1060] is a highly durable analog proximity command key (Card) that
transfers data in the form of passive tuned circuits within the card. Additional card features
include:
1) Unique encoding: Each card shall be encoded so that it is totally unique.
2) Universal operation: Each card shall have the capability to be programmed to operate
universally at different locations.
3) Durable: Card shall be highly resistant to face abrasion or bending.
4) Warranty: 5 (five) years.
5) Note: Active circuit type cards (those requiring batteries) shall not be acceptable.
b. Capacities: Card can generate an eight digit access number.
c. Specifications:
1) Dimensions: 3.36 X 2.12 X 0.1 in. (8.53 X 5.38 X 0.25 cm).
2) Construction: Heavy duty fiberglass epoxy with vinyl covering.
d. Environmental:
1) Temperature: -50° to +120° F (-46° to 49° C).
2) Humidity: 0% to 100% relative humidity.
e. Regulatory: N/A (Card is totally passive requiring no approval).
f. Power: Passive-powered by Analog Proximity Card Sensor.
g. Communication: Via field disturbance from Analog Proximity Card Sensor.
h. Manufacturer: Westinghouse Security Electronics, Model: [SE 1050 Command Key] [SE 1060
Command Key
12. Power Supply, Controller (3018):
a. General: The Power Supply can provide continuous power to the Controller, sensors, monitor
modules and annunciator devices.
b. Capacities: The Power Supply shall provide low volt DC output to the Controller.
c. Specifications:
1) Dimensions: 7 in. X 5.7 in. X 3.125 in. depth (17.8 cm L X 14.5 cm W X 7.9 cm D).
d. Environmental:
1) Humidity: 10% to 95% non-condensing.
2) Temperature: 20° to +120° F (-7° to +49° C).
e. Regulatory: UL 1012 or 1310 and CSA or cUL listed. [ Option 230VAC/50Hz is not UL, CSA or
cUL listed.]
f. Mounting: The Controller Power Supply should be installed in a secure area at least 2 feet
away.
g. Power: 115VAC/60Hz source. [Option: 230VAC/50Hz.]
h. Wiring:
1) The power supply shall be connected to the Controller via wiring of at least 18 AWG.
2) Connectors: Phoenix.