Specifications
WSE • 3/21/97 16720 — iv Alto 818 Access Control System
installation to verify proper operation and confirm that the panel
wiring and addressing conform to the wiring documentation........................... 2
4. Service facility: Systems Integrator shall have service facilities within
[_____] miles of the installation. .............................................................................. 2
D. Regulatory Requirements:............................................................................................................. 2
1. NEC Compliance: All electrical wiring work shall comply to NEC. ........................... 2
2. NEMA Compliance: Electrical equipment shall comply with applicable
portions of NEMA...................................................................................................... 2
3. FCC Emissions: All assemblies shall be in compliance with FCC emission
standards. ................................................................................................................... 2
4. UL-1012 and CSA: All power supplies shall be in compliance with
Underwriters Laboratories standard 1012 and CSA standards for
power supplies........................................................................................................... 2
5. [UL-294: The system shall comply with Underwriters Laboratories
standard 294 for Access Control Systems. (Alto 818 SX only)]............................ 2
E. Warranty: .......................................................................................................................................... 2
1. Analog Proximity Command Cards: No less than 5 (five) years................................... 2
2. Digital Command Cards: No less than 1 (one) year. ...................................................... 2
3. System Components: 15 (fifteen) months from shipment date or 12
(twelve) months from date of purchase by Systems Integrator,
whichever comes first. ............................................................................................. 2
PART II PRODUCT.............................................................................................................................................................. 3
.1 MATERIALS & COMPONENTS ...................................................................................................................... 3
A. System Description: ........................................................................................................................ 3
1. The Access Control and Security system within the building shall consist of
a microprocessor based controller that can be either a standalone or
a networked unit with means to program, monitor intrusion and
limit access to a single, or a series of, one-door to eight-door
controlled areas. ........................................................................................................ 3
2. A single system shall support up to 8 (eight) card reading sensors [and/or
Keypads] and up to 8 (eight) modules of 4 (four) inputs each............................ 3
3. Cards: .................................................................................................................................... 3
4. Keypad modes:.................................................................................................................... 3
5. The Access Control and Security System shall provide complete software
and hardware to operate with the following features:......................................... 3
B. Hardware features: .......................................................................................................................... 4
1. Access Controller (Alto 818 SC / Alto 818 SX):.............................................................. 4
2. Multiple Switch Monitor (774A): ..................................................................................... 5
3. Annunciator Control Module (778A): ............................................................................ 6
4. Digital Proximity Key Reading Sensor (DigiReader):................................................ 7
5. Keypad (VIP-2): .................................................................................................................. 8
6. Analog Proximity Card Reading Sensor (SE 2800 Series):......................................... 9
7. Analog Proximity Card Reading Sensor—Compact Model (2804):......................... 10
8. QuadraKey Digital Proximity Command Card:........................................................ 11
9. NexKey Digital Proximity Command Card:............................................................... 11
10. DuraKey Digital Proximity Command Card: .......................................................... 12
11. Analog Proximity Command Card ([SE 1050] [SE1060]): ...................................... 13
12. Power Supply, Controller (3018): ................................................................................ 13
13. Power Supply with battery backup, Controller (3718S or 718SUL):.................... 14
14. Power Supply (PI-1):...................................................................................................... 14
15. Accessories ....................................................................................................................... 15
C. Controller software features: ....................................................................................................... 16
1. Control operation: Based on the ability to force relay lock outputs to an
operating mode. Forcing action may be initiated by: ......................................... 16
2. Access Codes: .................................................................................................................... 16
3. Holidays: ............................................................................................................................ 16
4. Card Commands: The user shall be able to define command cards
according to the following parameters:................................................................ 16
5. Card functions: Card functions shall include: ............................................................. 16
6. Monitoring (if monitoring module is required): .......................................................... 17
7. Annunciation (if Annunciator is used): ........................................................................ 17
8. Alarm Shunting: ............................................................................................................... 17
9. Forced Entry Alarms: ...................................................................................................... 17
10. Passwords: ....................................................................................................................... 17