Specifications

Section 5: Bench Check
5-5
4. If using a SE 57101 terminal, reset the terminal setup configuration as follows:
A. Press shift and setup keys simultaneously; the setup menu bar will appear across the
bottom of screen.
B. Use the down arrow to scroll through the setup displays; stop at SET 4. The display
should read:
|SET 4|EIA=HOST|7 BITS|BIT8 1|PARITY ON|PARITY ODD|STOP1|BAUD:300|
C. Use the left and right arrow keys to scroll horizontally across the menu; use the space
bar to scroll vertically at any menu entry that does not read as shown in step 5B, above.
D. Press setup key to return to main screen.
If using a Qume 101-compatible terminal other than an SE 57101, set up the terminal for 7
bits, 1 stop bit, odd parity, and baud rate 300 as described in terminal users manual.