Specifications
Section 6: Commands
6-19
1050/1060 KEY (Y/N) Y?
2. If a 1050 or 1060 key is to be input type Y; for 1030 or 1040 keys type N. Type N for digital
keys. Press Enter. The screen displays:
KEY CODE?
3. The key code can be found on one edge of the command key.
The 1050 keys may have code numbers from 1 to 24,040,016; and the 1060 keys may have
code numbers from 24,040,017 to 99,999,999.
If VIP ONLY key codes are to be entered, refer to the SYSTEM command field 16 for the
number of digits, 48. The number of digits entered for KEY CODE must be the same as
the VIP ONLY value.
Figure 6-6: Command Key Code Number
Type the code number and press Enter. If the key code is currently in the database, prompt
1 is displayed. If the key code has not been previously entered into the database, the screen
displays.
NOT IN MEMORY
ADD THIS KEY (Y/N)?
5. If N is entered, the command prompt line is displayed. If Y is entered the screen displays:
1. NAME (12): ?
6. A unique name with a maximum of 12 characters and spaces is entered in this field for each
key holder if keys are to be defined by both names and codes. Names greater than 12