Specifications

Section 6: Commands
6-25
GO TO (1-5)?
1. SEND TO HOST
OPEN (Y/N) N?
LIMITED (Y/N) N?
CLOSED (Y/N) N?
00:00-00:00?
00:00-00:00?
00:00-00:00?
2. CLOSE LATCHED CONTACT
OPEN (Y/N) N?
LIMITED (Y/N) N?
CLOSED (Y/N) N?
00:00-00:00?
00:00-00:00?
00:00-00:00?
3. CLOSE CONTACT (0-16)?
OPEN (Y/N) N?
LIMITED (Y/N) N?
CLOSED (Y/N) N?
00:00-24:00 SUN MON TUE WED THU FRI SAT HOL?
00:00-00:00?
00:00-00:00?
4. PREVENT BUILDING CLOSURE (Y/N) N?
5. PRINT * (Y/N) N?
Figure 6-10: REPORT Command Prompts
3. Press Enter to begin with the first field. Type a number in the range and press Enter to skip
to another field. The field 1 display is:
1. SEND TO HOST
OPEN (Y/N) N?
4. Type Y to send the report to the host or make no entry to accept the default, or current entry,
and press Enter. The screen displays:
LIMITED (Y/N): N ?
5. Repeat instructions for step 3, entering the Y or N to send the report to the host when the
building is in LIMITED mode. Repeat again for the next displayed line for CLOSED mode.
The screen displays:
00:00-00:00?
6. Up to three time intervals during which the report should be sent to the host may be defined.
Time intervals are in addition to modes selected above. Type the required time interval and
effective days and press Enter. The screen displays:
2. SEND TO TERMINAL AND CLOSE LATCHED CONTACT
OPEN (Y/N) N ?