Specifications
Section 6: Commands
6-35
DD = Day of the month (01-31)
MMM = Month of the year (JAN, FEB, MAR, etc.)
YY = Year (95, 96, etc.)
HH = Hours of the day in 24-hour time (00-23)
MM = Minutes in the hour (00-59)
To change to the current time and date, first enter the day of the week (MON, TUE, WED, THU,
FRI, SAT, or SUN, as appropriate), followed by the current day of the month (01-31), followed
by the current month (JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, or DEC,
as appropriate), followed by the last two numbers in the current year. Then set the time by
entering the hour (00-23) and then the minute (0-59).
For example, to set the time and date as Friday, June 16, 1995, 1:30 PM, type FRI <space> 16
JUN95 <space> 13:30 and press enter key:
Screen displays:
FRI 16-JUN-95 13:30
To verify the time and date settings repeat the TIME command or type PRINT TIME at the
command prompt and press Enter.
6.3.23 UNLOCK
The UNLOCK command is used to unlock any system door. Once a door is unlocked, it remains
unlocked until the RELOCK command is entered, or system power is lost, or the building mode
changes.
When the UNLOCK command is entered, the display is as follows:
YOUR COMMAND? UNLOCK
DOOR (1-8 OR 0 FOR ALL)?
Type the number of the door to be unlocked or select 0 for all doors. Press Enter and the
command prompt is displayed.