Specifications

Section 8: Operation
8-7
8.6 OPERATOR RESPONSIBILITIES
During normal operation, the Alto 818 does not require operator intervention.
8.6.1 SYSTEM MONITORING
A terminal may be interfaced to the Alto 818 to display all system activity. With an ACU
connection to a host, displayed information is selectable through host programing. Figure 8-1
shows an example of the log events displayed on a terminal during one hour of operation. The
system must be in the operate mode to display the log events reported to the terminal.
WED 07-JAN-98
01 14:07 LOBBY (1) ACCESS GRANTED SMITH, J. (12345)
02 14:08 LOBBY (1) KEY TRACE SMITH, J. (12345)
03 14:11 CAFETERIA (2) REQUEST TO EXIT
*04 14:12 CAFETERIA (2) DOOR OPEN TOO LONG
05 14:14 CAFETERIA (2) DOOR CLOSED
06 14:17 FIRE (3.4) MONITOR POINT ACTIVE
07 14:19 FIRE (3.4) MONITOR POINT CLEAR
08 14:19 REAR (7) ACCESS GRANTED JONES, L (32456)
09 14:23 REAR (7) ACCESS GRANTED BROWN, N (54632)
10 14:24 LOBBY (1) ACCESS GRANTED GREEN, S (14352)
*11 14:27 WEST (5) SENSOR FAIL
12 14:32 WEST (5) SENSOR OK
13 14:33 LOBBY (1) ACCESS GRANTED WHITE, M. (21354)
14 14:33 LOBBY (1) KEY TRACE WHITE, M. (21354)
15 14:42 EAST (2) MANUAL UNLOCK ADAMS, Q (1)
16 14:42 EAST (2) MANUAL RELOCK ADAMS, Q (1)
17 14:45 LOBBY (1) EXIT GRANTED
18 14:45 WEST (5) EXIT GRANTED
19 14:48 LOBBY (1) EXIT GRANTED
20 14:53 LOBBY (1) EXIT GRANTED
21 14:54 REAR (7) EXIT GRANTED
22 14:55 REAR (7) EXIT GRANTED
23 14:57 REAR (7) ACCESS GRANTED WILSON, B (52721)
24 14:57 LOBBY (1) EXIT GRANTED
27 15:06 BLDG CLOSED
Figure 8-1: Terminal Display Example