Specifications

Alto 818 Installation and Operation
8-8 P/N 66109074001 Rev. D
8.6.2 RESPONSE TO ALARMS
The Alto 818 can indicate an activity which requires operator intervention through the use of an
audible alarm or through a printed report. These parameters are set with the REPORT
command, Section 6.3.16. The use of the STATUS command may be needed to determine the
cause of the alarm or report generation.
An audible alarm, triggered by the latched contact on an Annuciator, will require that the condition
be corrected or the monitor point shunted, followed by the use of the SILENCE command
described in Section 6.3.27.