Specification Sheet

Saf-T-Cap
®
to protect bolts
and wires during painting
and sheetrock installation
©2011 Westinghouse Lighting Corporation / WLC / 0711 / 103900
Pack Information
• Bulk Packed
• 24 Per Cut Case
Ideal for New Construction or Remodel Work
US PATENT NO.
5,860,548
85e6
Mounting hardware
Specifications
• Removable sidemount bracket is for easy replacement
of existing nail-on boxes without attic access
• Fits all ceiling fans
• For fixture support of 70 lbs. or less
• Acceptable for fan support of 70 lbs. or less
• Heavy duty, 15.5 cubic inch dual mount* electrical box
• Box depth - 1½"
• 3 - ½" Romex or conduit knockouts
• Includes 2 sets of Romex knockouts and integral Romex clamps
Specification Sheet
Sidemount Plus
Fan Box
®
Item Number 0125011
10-24 threads
for heavier fixtures
and ceiling fans
Step 1
Mount bracket to joist
through 4" hole in sheetrock.
Step 2
Pull wire into box and remount
box to bracket.
8-32 threads
for cover plates
and lightweight
lighting fixtures
Call 1-800-999-2226 or visit www.westinghouselighting.com
Westinghouse Lighting Corporation, Philadelphia, PA 19154-1029, U.S.A. Westinghouse Lighting Corporation, a Westinghouse Electric Corporation licensee
“Westinghouse” and “You can be sure...if it’s Westinghouse”are all registered trademarks of Westinghouse Electric Corporation
Includes Mounting Hardware and Instructions.
Meets or Exceeds UL Standards Regarding Exposed Threads Within Box.
Meets or Exceeds NEC
®
Safety Codes.
*Dual Mount = Box is threaded for 8-32 (ideal for box covers and lightweight fixtures) and
10-24 screws (ideal for heavier fixtures and ceiling fans).
Romex® is a registered trademark of Southwire Company.
Easy to install through 4" hole in sheetrock
2 Romex
clamps