USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO VM-42F140S VM-47F140S 1080p Monitor Moniteur 1080p
TABLE OF CONTENTS 1. IMPORTANT SAFETY AND PRECAUTIONS……………………..….. 1 1.1 Important Information………………….…………………………… 1 1.2 Important Safety Instructions………………………………………. 2 2. GENERAL INFORMATION………………. ………………………….….. 4 2.1 Overview……………………………….…………………………….. 4 2.2 Feature………………….……………..………………………………. 7 2.3 Controls and Ports of the Monitor…………..………………………. 9 2.4 Accessories………………………………………………………….. 12 2.5 Remote Control……………………..…………………………......... 13 3. INSTALLATION & FUNCTION ADJUSTMENT………….………… 15 3.
Warning : To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Risk of electric shock. Do not open. The symbol is intended to alert the user to presence of un-insulated ”Hazardous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The symbol is intended to alert the user that improper use of the product may result in product malfunction.
1.2 Important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
English Español Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 3 Français 13.
2. GENERAL INFORMATION 2.1 Overview A.
Français Español English B.
C. Side View of the HD Video Monitor Right Side Function Buttons Use the function buttons on the right side of the HD Monitor or on the remote control to display the On Screen Display (OSD).
2.2 Feature It’s the highest resolution 42”/47" 1080p monitor on the market. The Westinghouse VM-42/47F140S features a 1920 x 1080 resolution display with more than 2 million pixels. True 1080p The Westinghouse VM-42/47F140S 1080p monitor is a true 1080p monitor. It can accept, process and output any 1080p source input.
DVI x 1, Support Format: 640 x 480 @ 60Hz, 720 x 400 @ 70Hz, 800 x 600 @ 60Hz, 800 x 600 @ 72Hz, 800 x 600 @ 75Hz, 1024 x 768 @ 60Hz, 1024 x 768 @ 70Hz, 1024 x 768 @ 75Hz 1280 x720 @ 60Hz, 1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz, 1280 x 1024 @ 75Hz, 1920 x 1080 @ 60Hz, 480i/p, 720p, 1080i/p z HD Cable, HD Satellite and HD Gaming Because the VM-42/47F140S is a true 1080p monitor, you can attach all your favorite sources using uncompressed digital interfaces.
2.3 Controls and Ports of the Panel English Front Panel Views Français Español A. Function Keys Remote sensor window & Power indicator FUNCTION KEYS 1. MENU: Displays the main menu. When OSD is appeared, press the button to select or access the sub-menu. 2. VOLUME (+ / -): Increases/decreases the volume or use as the left/right arrow button for menu. 3. CHANNEL (+ / -): Changes the Source or use as the up/down arrow button for menu. 4.
B. Side Panel Views 1 1. DVI Input Using a DVI cable, connect to a computer, HD Digital cable/satellite receiver, HD Set-Top-Box, DVD or other device with a DVI output. 2 2. DVI AUDIO Input (Left / Right) Connect an external DVI audio source to this jack. 3 3. HDMI1 Video Input Connect to an external video device such as HD Digital cable/satellite receiver, HD Set-Top-Box, Media Center PC, or DVD player 4 4.
9. VGA Audio Input (Stereo) Connect to the audio out from a computer. 10. YPbPr1 / YPbPr2 Video Input 10 Connect an external video device such as DVD or video game system with component output to these jacks 11 11. Audio Input (Left / Right) Connect an external audio source for component input 12. S-Video / Composite Video Input 12 13 14 15 13. Audio Input (Left / Right) Connect an external audio source for S-Video / Composite input 14.
2.
1 Switch MONITOR power On/Off. 1 2 5 3 4 6 7 8 Mute Turn the sound On/Off. 3 Swap Not supported. 4 PIP Español 2 Power English 2.5 Remote Control 5 Backlight Adjust the LCD backlight level. 9 6 7 29 10 11 8 Sleep Press to select a preset time interval for automatic power down. C.C. Not supported. Favorite Not supported. 12 13 9 14 10 Channel number keys Select specific input source. 15 16 17 18 Enter Execute a command. 11 Input Select input source.
19 Not supported. 1 2 5 3 4 6 7 8 Guide 20 Info 21 YPbPr1 Display the source information. Select YPbPr1 source input. 22 MONITOR Not supported. 23 PC 24 HDMI Select VGA source input. 9 Select HDMI 1, 2 or 3 source input. 25 29 Select YPbPr2 source input. 10 11 YPbPr2 26 DVI Select DVI source input. 12 15 13 27 Video 14 16 28 Select Video input. S-Video 17 18 19 20 21 23 22 24 26 28 25 27 Select S-Video input. 29 Dot button Not supported.
English 3. INSTALLATION AND FUNCTION ADJUSTMENT 3.1 Installation 1) Remove the battery cover. Français 2) Insert two size AAA batteries corresponding to (+) and (-) marks on the battery compartment. Español z Insert Batteries into Remote Control CAUTION ‧ Only use AAA batteries. ‧ Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. ‧ Insert batteries according to (+) and (-) markings.
z Connect power cables Connect the power cord to the LCD MONITOR then to a proper AC outlet. IMPORTANT: The power input voltage for MONITOR is 100 ~ 240Vac, before beginning; make sure all devices are turned off. z Turn Power On Press the power button on the right side of the LCD MONITOR, or press the power (Red) button on the remote control.
Español a. Carefully place the TV face down on a soft clean surface. b. Position the BASE at bottom the TV. c. Install the four screws underneath the BASE. English 3.
3.3 How to remove the BASE a. Carefully place the MONITOR face down on a soft clean surface. b. Remove the four screws underneath the BASE. (See picture below) c. Pull out the BASE from the MONITOR.
There are four main Setup Menus; these are Picture, PC, Audio and Setting. All the functions can be adjusted either by the remote control or by using the control keys on the English 3.4 Function Adjustment Viewing OSD Menu To display the main menu, press the Menu button on the right side of front control keys of the LCD MONITOR or the MENU key on the remote control. Press arrow keys to select desired OSD menu and Enter key to select desired setting.
PICTURE 1. PICTURE MODE < ENHANCE / MOVIE / SPORT / GAME / USER > Press arrow key to adjust your favorite picture mode setting. 2. BRIGHTNESS (For Picture Mode set to USER Only) < 0 ~ 100 > Press arrow key to adjust brightness setting. 3. CONTRAST (For Picture Mode set to USER Only) < 0 ~ 100 > Press arrow key to adjust contrast setting. 4. SATURATION (For Picture Mode set to USER Only) < 0 ~ 100 > Press arrow key to adjust saturation setting. 5.
1. AUTO (For PC Analog input only) Press Enter key to do PC auto-adjust function. English PC < 0 ~ 100 > Press arrow key to adjust PC clock setting. 3. PHASE (For PC Analog input only) Español 2. CLOCK (For PC Analog input only) 4. H-POSITION (For PC Analog input only) < 0 ~ 100 > Press arrow key to adjust PC Horizontal Position setting. 5. V-POSITION (For PC Analog input only) < 0 ~ 100 > Press arrow key to adjust PC Vertical Position setting.
AUDIO 1. VOLUME < 0 ~ 100 > Press arrow key to adjust volume setting. 2. EQUALIZER < STANDARD / MOVIE / MUSIC / USER > Press arrow key to adjust your favorite equalizer mode setting. 3. BASS (For EQUALIZER set to USER Only) < 0 ~ 100 > (For equalizer is selected as “user” mode only) Press arrow key to adjust your favorite bass setting. 4. TREBLE (For EQUALIZER set to USER Only) < 0 ~ 100 > (For equalizer is selected as “user” mode only) Press arrow key to adjust your favorite treble setting. 5.
English SETTINGS 1. MENU POSITION z MENU H-POSITION Press arrow key to adjust menu position. 2. MENU TIMEOUT Español z MENU V-POSITION Press arrow key to adjust OSD MENU timeout function setting. 3. LANGUAGE < ENGLISH / 繁體中文 / SPANISH / FRENCH > Press arrow key to adjust OSD MENU timeout function setting. 4. SLEEP TIMER < OFF / 15MIN / 30MIN / 45MIN / 60MIN > Press arrow key to adjust your favorite equalizer mode setting. 5.
7. REMOTE LOCK < ON / OFF > When REMOTE LOCK ON, press “ i ” key for about 7 sec to unlock. 8. SETUP MENU LOCK < ON / OFF > When REMOTE LOCK ON, press “ i ” key for about 7 sec to unlock. “i” 9. SET ID < 0 ~ 99 > Press arrow key to adjust additional feature function setting. 8. AUTO SOURCE < ON / OFF > Press arrow key to adjust auto source function setting. 9. SYSTEM INFO Press Enter or arrow key to display the system information. 10.
There is no picture from AV. ▪ Make sure the BRIGHTNESS is properly adjusted. ▪ The florescent lamp may have reached the end of its life. Contact an authorized service center. ▪ Make sure the video source is plugged into the composite video-in port. There is no sound. ▪ Make sure the volume is not set to minimum. ▪ Make sure the sound is not muted There is no picture or sound, just noise. ▪ The source signal may be weak. ▪ Your provider may be experiencing difficulties. ▪ Check your input connections.
Picture is light or improperly tinted. ▪ Check the Hue, Saturation and Color adjustments. ▪ Reset the MONITOR to the factory default settings. The picture is too dark. ▪ Select a different Video Preset mode. ▪ Check the Brightness of Picture Settings. ▪ The fluorescent lamp may have reached the end of its life. Contact an authorized service center. Remote control does not work. ▪ Install new batteries. ▪ Make sure the remote sensor window isn’t blocked.
The picture is not sharp. Español ▪ The provider may be experiencing difficulties. ▪ Check input connections. ▪ Check the Sharpness of Picture Settings. English ▪ The signal source may be weak. The picture moves. ▪ The provider may be experiencing difficulties. ▪ Check input connections. The picture is doubled or tripled. ▪ The source signal may be weak. ▪ Check input connections. The picture is spotted. ▪ There may be interference from other appliances nearby or around the LCD Monitor.
5. PRODUCT SPECIFICATION ITEMS Panel Video Input PC Input Audio Input Audio Output Feature Screen Size 42” LCD Panel Aspect Ratio 16:9 Resolution 1920 x 1080 Display colors 16.7 Million True Colors Viewing Angle (CR>10) 176 Hor./ 176 Ver. (typ.
Video Input PC Input Audio Input Audio Output Feature 47” LCD Panel Aspect Ratio 16:9 Resolution 1920 x 1080 Display colors 16.7 Million True Colors Viewing Angle (CR>10) 176 Hor./ 176 Ver. (typ.
www.wde.