WIDESCREEN LCD TV Model W2602 BK
Contents Product Safety Instructions …………………..….………….………. 2 Antenna Installation Safety…………………………………….…….. 3 Safety Guidelines…………………………………………….……..… 4 Cleaning the LCD TV…………………………………………….…… 5 INSTALLATION Package Contents………………………………….…………………. 6 Front View of the LCD TV…………………..……………………….. 6 Side View of the LCD TV…………………….………………………. 7 Rear View of the LCD TV………..……………………………………9 Remote Controls…………………..…………………………………..10 Installation………….………………………………………………….
1
PRODUCT SAFETY INSTRUCTIONS Follow and obey all warnings and instructions marked on the LCD TV. For your safety, please read all the safety and operating instructions before you operate the LCD TV. Keep this user’s manual for future reference. Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock.
Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Safety Guidelines WARNING: This device must be operated with the original power supply, part number DPS-210 EP 2 C. CAUTION: The power supply outlet should be located near the LCD TV and should be easily accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below: USA..................UL Switzerland ..... SEV Canada.............CSA Britain ............. BASE/BS Germany..........VDE Japan ...............
Cleaning the LCD TV • • MAKE SURE THE LCD TV IS TURNED OFF NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
INSTALLATION Package Contents Your product package includes: • Westinghouse LCD TV (Model No. W2602 BK) • Remote Control (with batteries) • Power Cord • User’s Manual • Warranty Card Front View of the LCD TV Use the buttons on the right side of the LCD TV or on the remote control to display the On Screen Display (OSD). The OSD controls are defined in “OSD Functions” on page 13.
Side View of the LCD TV 1. Menu Turn OSD Menu ON/OFF Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu. Channel up/down when input is TV or highlight a control while in the OSD Menu. 2. Volume + / 3. Channel + / 4. Input Select Active Video Input or choose a selection while in the OSD MENU. 5.
1. S-Video Input Connect to an external video device such as a VCR or video game system. 2. AV1 Video Input Connect to an external video device such as a VCR or video game system. 3. AV1 & S-Video Audio Input (Right / Left) Connect an external audio source to this jack; (Audio (R/L). This connection supports either S-Video or AV input. 4. Audio Output (Right / Left) Connect this output to an external audio receiver. 5. ANT (RF-input) Connect the LCD TV to an antenna or cable service. 6.
Remote Control 1. POWER: Switch the power On/Off 2. INPUT Select input source 3. CHANNEL NUMBER KEYS Select specific channels 4. SAVE CURRENT CHANNEL Press once to save current channel. Press again to return to saved channel (Note: This will save the new current channel). 5. MENU/EXIT Turn OSD Menu On/Off or quit the TV channel scanning 6. SCALING Select Video Display format “STANDARD” or “FILL” or “ZOOM” 7. T / S / W / X OSD MENU control 8. Enter Execute a command 9. MUTE Turn the Sound On/Off 10. INFO.
Installation 1. Insert Remote Control Batteries 1) Remove the battery cover. 2) Insert the batteries corresponding to the (+) and (−) marks on the battery compartment. 3) Re-attach the battery cover. CAUTION: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to (+) and (−) markings.
IMPORTANT: Before beginning, make sure all devices are turned off. 2. Connect audio and video cables to a PC VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to the LCD TV VGA IN port. AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO OUT port to the AUDIO IN port on the LCD TV. 3. Connect AV, Component, S-Video, Antenna/Cable to Video Devices Connect one or all of the following compatible devices into the back of the LCD TV.
4. Connect power cables Connect the power cord to the LCD TV then to a properly grounded AC outlet. LCD TV 5. Turn Power On Press the Power ON button on the right side of the LCD TV, or press the Power ON (Red) button on the remote control. 6. Select input source for the LCD TV using the OSD menu or remote control 7. If connecting to Antenna, Cable or other RF source on TV Inputs: See page 18 to auto scan and edit available channels. 8.
OSD Function All the OSD function settings are controlled either by the remote control or using the control keys on the right side of LCD TV. To display the OSD main menu, press the Menu button on the right side of front control keys of the LCD TV or the MENU key on the remote control. Use 3/4 arrow keys to highlight the desired OSD sub-menu. Main Menu To select a sub-menu, press ▲/▼ on the right side of the LCD TV or the ▲/▼ key on the remote control.
PICTURE PARAMETERS: Function Name Brightness Contrast Saturation Hue Color Temp Function Aspect Ratio Brightness adjustment Contrast adjustment Saturation adjustment Hue adjustment Color temperature adjustment (Color 1, Color 2, Color 3) Sharpness adjustment (Sharpness cannot be adjusted in PC mode) Set display to “STANDARD” / “FILL” / “ZOOM” Backlight Backlight adjustment Reset Reset video settings Sharpness 14
PC PARAMETERS: Function Name Auto Adjust Clock Phase Position Function Automatically adjust the horizontal phase of the image Clock adjustment Phase adjustment Adjust the horizontal and vertical position of the image NOTE: The GRAPHIC menu is only available when VGA source is selected.
AUDIO SETTINGS: Function Name Volume Bass Treble Balance MTS Mute Speaker Reset Function Volume adjustment Bass adjustment Treble adjustment Balance adjustment MTS Selection NOTE: This function depends on the type of broadcast being received.
PICTURE-IN-PICTURE: Function Name Display Mode Main Source Function OFF --> PIP --> PBP --> POP Select main screen sources TV --> AV1 --> AV2 --> S Video -->YPbPr1 --> YPbPr2 --> VGA --> DVI Select sub screen sources Please see PIP/PBP/POP specification in Table 1 Swap main screen and sub-screen source PIP Source Swap PIP Position Sub-screen display horizontal/vertical position adjustment Sub-screen display size adjustment (Small -->Medium --> Large) Select main screen or sub-screen audio sources PIP S
CHANNEL SETTINGS: Function Name TV / CATV Auto Scan Channel EDIT Close Caption Function Select TV Source Type (ANTENNA => Cable STD => Cable HRC => Cable IRC) Automatically detect available TV channels Add / Delete the selected TV channel Turn the Close Caption OFF or CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4 PARENTAL CONTROLS: Function Name Lock Menu MPAA Rating TV PG Rating Password EDIT Function Turn parental control OFF or ON See page 20 See page 20 Change Password (see page 20) 18
Function Name Function NONE: Not available G: General audience PG: Parental guidance suggested PG-13: Parents strongly cautioned R: Restricted NC 17: No one 17 and under admitted X: Adult audience only MPAA Rating TV PG Rating TV Y: All children TV Y7: For older children TV G: General audience TV PG: Parental guidance suggested TV 14: Parents strongly cautioned TV MA: Mature audience only Password Edit Change Password 19
GENERAL SETTINGS: Function Name Menu Position Menu Timeout Language Sleep Timer Transparency DPMS System Info Factory Reset Function OSD horizontal/vertical position adjustment Set the time to turn off the OSD automatically OSD language selection Set sleep timer to turn off the power automatically Set OSD transparency level Select DPMS On/Off Display Input source, type and signal Restore factory default settings 20
LCD TV Specifications W2602 BK Model Name Panel Type TFT (Thin Film Transistor), Active Matrix WXGA LCD, 1280 x 720 vertical stripe Color Anti-reflective coating + Anti-glare coating 170° (H) / 170° (V) Viewing Angles Input Signal Video/Audio VGA Analog * 1 (75 ohms, 0.
Troubleshooting No Power • • • Make sure power button is ON. Make sure AC power cord is securely connected to the AC socket. Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Parental Control Password is Forgotten • In the unlikely occurrence, select “PASSWORD EDIT” and enter “0000” to reset the password. AUDIO Interconnection Issues • Remember that S-Video and Composite (AV1) share the same audio source.
Remote Control Does Not Work • • Make sure batteries are inserted correctly. Replace batteries with new ones if necessary. Remote Control Code Not Found in a “Universal” Remote • Purchase a separate “learning” remote control. Image Quality Issues • For the best TV image quality, “Standard Definition” TV should be viewed in 4:3 format. How Can I Find More Help? • • Log on to: www.westinghousedigital.com Contact Westinghouse Customer Service at (866) 287-5555 or write us at service@westinghousedigital.
Santa Fe Springs, CA SE-UM-2601-0501