English If you have any questions or concerns, Please call our toll free number 1-866-287-5555 1
Contents 2 English PRODUCT SAFETY INSTRUCTIONS ........................... ..4 Antenna Installation Safety ............................................. ..5 Safety Guidelines ............................................................ ..6 LCD TV Overview............................................................ ..7 Package Contents ....................................................... ..7 Front View of the LCD TV............................................ ..7 Rear View of the LCD TV ...............
English Cleaning the LCD TV • • MAKE SURE THE LCD TV IS TURNED OFF NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
PRODUCT SAFETY INSTRUCTIONS Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords and each end of the cords for damage. The LCD TV shall be installed near a wall socket outlet and the plug on power cord shall be readily accessible.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use the LCD TV near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not attempt to bypass the safety purpose of the polarized or grounding- type plug.
Safety Guidelines WARNING: This device must be operated with the original power supply. IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The specific power cord for this LCD TV is enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed.
LCD TV Overview This User Manual covers models:W3213 HD English Package Contents Your product package includes: • Westinghouse W3213 HD LCD TV • Remote Control (with batteries) • Power Cord • Quick Connect Guide • User’s Manual • Warranty Card Front View of the LCD TV Speakers IR receiver Rear View of the LCD TV 7
Side View of the LCD TV Control keys Control Key MENU 1. Menu Turn OSD Menu ON/OFF + VOL - 2. Volume + / - Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu + CH - 3. Channel + / - Channel up/down when input is TV or highlight a control while in the OSD Menu INPUT 4. Input source Select Active Video Input or choose a selection while in the OSD MENU 5.
Input Connector 2. Video Input Connect an external video device with composite video output. 3. Video & S-Video Audio Input (Right / Left) Connect an external audio source to this jack (Audio (R/L). connection supports either S-Video or Video input. This 4. SPDIF Output(optical) Connect this output to an external stereo audio amplifier, receiver or surround sound processor with SPDIF optical Input. 5.
Remote Control English 1. POWER : Switch TV power On/Off 2. SWAP : Feature not available on this model 3. PIP : Feature not available on this model 4. Mute : Mute the sound 5. Sleep: Set sleep time to turn TV off automatically. 6. CC: Closed Caption On/Off. 7. Backlight: Adjust the LCD Backlight level 8. Favorite : Select, remove or add your favorite channel. Press Favorite (A, B, C) key to access favorite list. Use arrow keys and enter key to select, add or remove the channel from favorite list.
20. English 21. TV: Select TV source input. 22. HDMI: Select HDMI source input. 23. PC : Select VGA source input. 24. YPbPr1: Select YPbPr1 source input. 25. DVI: Feature not Available on this model 26. S-video: Select S-video source input. 27. AV: Select Video source input. 28. YPbPr2: Select YPbPr2 source input. Note: Before setting up favorite channel, please make sure channel list is saved in TV. If not, perform channel scan to save a channel list in TV.
Installation 1) Remove the battery cover. 2) Insert the batteries corresponding to (+) and (−) marks on the battery compartment. 3) Re-attach the battery cover. CAUTION: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to (+) and (−) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a fire risk or lead to personal injury.
Connect one or all of the following into the back of the LCD TV. IMPORTANT: Before connecting to the TV , make sure all device are turned off. VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to the LCD TV VGA IN port. AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO OUT port to the AUDIO IN port on the LCD TV. 3. Connect Video, S-Video, YPbPr, Antenna/Cable to Video Devices Connect Video/Audio cables from compatible devices to the back panel of the LCD TV.
4. Connect power cables Connect the power cord to the LCD TV then to a properly grounded AC outlet. Press the Power button on the right side of the LCD TV, or press the Power (Red) button on the remote control. 6. Select input source for the LCD TV using the OSD menu or remote control direct select buttons 7. If connecting to Antenna, Cable or other RF source on TV Inputs: See page 20 to scan and edit available channels. 8.
Function adjustment Viewing OSD Menu To display the OSD main menu, press the Menu button on the right side of front control keys of the LCD TV or the MENU key on the remote control. Press arrow keys to select desired OSD Menu and Enter keys to select desired OSD setting. 15 English There are six main OSD menus, these are Picture, Audio, Channels, Settings, and Locks. All the functions can be adjusted either by the remote control or using the control keys on the of LCD TV’s right side.
Picture English Picture Settings Press arrow keys to select or adjust your favorite picture settings, Done button to close picture setting menu. Aspect Ratio Adjust your TV screen to handle different picture formats. Standard Displays the image exactly as broadcast.
Color Temp Use arrow key to set the picture color temperature. English Reset Picture Reset picture settings to factory default setting, the RESET will only restore picture default settings only.
Audio Setting English Bass, Treble & Balance Use arrow keys to adjust the bass, treble and balance. Analog Preference Select an analog audio preference or turn on SAP(Secondary Audio Program) or alternate language. TV Speaker User arrow keys to select audio out from internal, external or both speakers. Internal Audio from internal speaker only External Audio from external speaker if your TV is connected to a home theater or stereo Both Audio from both internal and external speakers.
Reset Audio Reset all of audio settings to factory default setting, the RESET will clear all of audio adjustments you made and restore to default setting only. English Channels Master List Edit the mater list of all your scanned channels, you can select the channels you want to enjoy or skip in the list.
Favorites Edit your favorite channels in the list. When you start to edit your favorites channels, the four-digits PIN may be required if you have changed default pin number. English Use arrow keys and enter key to edit favorite channels. Select List Select which favorite channel list you want to edit Unmark All Remove all of channels from current favorite channel list Rename List Rename the favorite channel list Sort Mark Sort or unsort marked channel in the list.
Scan Channels Use arrow keys and Enter key to select the source you want to scan channel. English Channel Name Edit Select channel to edit channel name in the channel list.
Settings English Menu Language Use arrow keys to select the language for menu and messages showing on your TV, press Enter key to exit Setup Wizard menu. Closed Caption Activation Use arrow keys to select the activation to “OFF” ,”ON” or “ON when Muted” for your TV.
Basic Selection Choose the type of closed caption settings to use for programs broadcast with basic caption. English Advanced Appearance Use arrow keys to adjust closed caption appearance such as font and size, each change can be previewed on bottom of menu. Caption preference Use arrow keys to select caption preference to Always Basic, Always Advance or Automatic for your TV.
Reset CC Reset all of closed caption setting you made to factory default setting. Press Reset button to reset all closed caption settings, Don’t Reset button to ignore the reset. English Sleep Time Set the sleep time to turn off TV. Input labels Customize the label associated with each input.
Autosource Use arrow key to select auto source On or OFF, Autosource can detect new source which is plugged in TV and switch input source setting of your TV to the source automatically. English Power Management Use arrow keys to set the power mode to Normal or Energy Saving Normal TV will boot within few sec. (default) Energy Saving TV will turn off all power, resulting in longer boot up time. Power On plug Memorize the DC power status while AC power off.
LED Set System Info Display important system info, you may need the information when calling customer service or troubleshooting such as firmware version and micro version. Press Done button or W key to previous menu. 26 English Set the LED on/off ON The front LED is lit while the TV is on. OFF The front LED is always off.
Reset All Reset all settings back to factory defaults. Reset will delete all settings you have made including channel list. You must run Setup Wizard after a reset. English Press Don’t Reset button to ignore the reset and back to previous menu, Reset button to clear all setting you made. Setup Wizard will be initialized after Reset button is press. Setup Wizard Setup Wizard displays language, Time Zone, Daylight Saving, RF Input Source and Scanning Channel by sequence.
Daylight Saving Select Daylight setting via arrow keys, press Enter to exit Setup Wizard menu, GO BACK button to previous Setup Wizard menu. English RF Input Source Select your TV source from Antenna or cable via arrow keys, press Enter to set Antenna or cable source type, GO BACK button to previous Setup Wizard menu Scanning Channels Scanning channel searches available digital (HDTV) and analog (SDTV) channels of selected TV source, the numbers of available channels will show on the OSD menu.
Locks The pin number is required when you want to enter Locks menu, just use the remote control to key in your pin number. The factory default pin number is 0000. For lock settings menu, there are four options: Rating Locks, Channel Locks, Change Pin and RESET LOCKS. Rating Locks Use arrow keys on remote control to select which USA or Canada rating you want to set.
USA-TV Rating All children For older children General audience Parental guidance suggested Parents strongly cautioned Mature audience only English TV Y YTV Y7 TV G TV PG TV 14 TV MA USA-Movie Rating G PG PG-13 R NC 17 X General audience Parental guidance suggested Parents strongly cautioned Restricted No one 17 and under admitted Adult audience only Canada-French G 8 ans+ 13 ans+ 16 ans+ 18 ans + General programming, suitable for all audiences Children eight years and older Viewers 13 year and older V
Canada-English PG 14+ 18+ Children Children eight years and older General programming, suitable for all audiences Parental guidance Viewers 14 year and older Adult programming English C C8+ G Block Unrated Shows Use arrow keys on the remote control to set Block Unrated Shows, TV will lock unrated TV programs if it is set to ON. Channel Locks To set which channels are locked, use arrow keys to lock one or more channels. Select button on menu to lock or unlock all channels.
Change PIN Change and set up new PIN, press number keys to enter old PIN and new PIN, the PIN must be four digits. English RESET LOCKS Press Reset button to reset all channel and rating locks, Don’t Reset button to ignore the reset.
Product Specification W3213 HD LCD TV Specifications Panel Type Color 176° (H) / 176° (V) Viewing Angles Input Signal W3213 HD 32" (32.02" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix WXGA LCD, 1366 x 768 vertical stripe Anti-reflective coating < 2% reflection Video/Audio VGA Analog * 1 (75 ohms, 0.
Troubleshooting • • • Make sure power button is ON (Blue LED ). Make sure AC power cord is securely connected to the AC socket. Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Parental Control Password is “Lost” • In the unlikely occurrence, select “PASSWORD EDIT” and enter “0000” to reset the password. Audio Interconnection Issues • Remember that S-Video and Composite (Video) share the same audio source.
Remote Control Does Not Work • • Make sure batteries are inserted correctly. Replace batteries with new ones if necessary. • Purchase a separate “learning” remote control. Image Quality Issues • For the best TV image quality, “Standard Definition” TV should be viewed in 4:3 format. How Can I Find More Help? • • Log on to: www.westinghousedigital.com Contact Westinghouse Customer Service at (866) 287-5555 or write us at service@westinghousedigital.
5010040800
