User`s manual

CAUTION
RISK OF DAMAGE IF BATTERY IS REPLACED WITH AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Connecting and Setting
For the safety of you and your unit, please do not connect any power source before the
external device is installed

1 External Computer and Touch Connecting

(1) Connect a VGA cable (15pin) between the PC-VGA Input and Output of external PC.
Connect an audio cable between the PC and display.
(2) Connect a USB cable between the external PC and USB terminal
(3) Plug-in the POWER cord and switch the display on.
(4) Start the external computer (Setup the touch driver).
(5) Press 1 (one) to turn the power on.
(6) Press INPUT and change source to PC.
2 A/V Connection