USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO WD65NH4190
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CONTENTS Important Safety Instructions 2 Safety Information 3 Preparation 4 What's Included 4 Front View 5 Rear View 6 Installing the Stand 7 Removing the Stand for Wall-Mounting 7 Remote Control 8 Connecting External Devices 9 Customizing TV Settings 10 Initial Setup 10 Navigating the Setup Settings 11 Apps 12 Media 13 Viewing Photos 13 Playing Movie 14 Playing Music 14 Source 15 Setup 15 System 16 Channel 18 Support 18 Lock 19 Picture 20 Network 21 Audio
IMPORTANT SAFETY INSTRUCTIONS t Read these instructions – All the safety and operating instructions should be read before this product is operated. t Keep these instructions – The safety and operating instructions should be retained for future reference. t Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. t Follow all instructions – All operating and use instructions should be followed.
SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATION What's Included TV Set TV Stand User Manual En 4 Remote Control with Batteries HDMI Cable Four Screws (M4x16) Quick Connect Guide User Manual Quick Connect Guide 810265F7B00070 860255F7B00060 Warranty Card Warranty Card 860155F7B00050
PREPARATION Front View POWER Switch the TV between On / Standby mode. SOURCE Press to select among different input signal sources. MENU Display the main menu. CH Press to select a channel. VOL +/- Press to adjust the volume. POWER Indicator Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. IR (Infrared Receiver) Receive IR signals from the remote control.
PREPARATION MI AU IO 10 COMPONENT 900 Rear View OPTICA AN MI MI GA PC AU I O 1. Power Cord Connect to AC power outlet. 2. OPTICAL Output Connect a digital sound system to this jack. 3. USB Port Connect to a USB storage device to play compatible movie and photo 4. LAN Network connection port. 5. HDMI Input Connect to a (HD) signal input device. 6. VGA Input Connect to a computer or other devices with a VGA interface. 7. PC AUDIO Input Connect to a computer audio output. 8.
PREPARATION Installing the Stand t Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. t Fix the Left Connecting Base to the main unit using the 2 provided screws. t Fix the Right Connecting Base to the main unit using the 2 provided pcs provided screws. Removing the Stand for Wall-Mounting t Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. t Untighten the 4 pcs screws holding the stand assembly and remove them.
PREPARATION Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. En 8 : Switch the TV between On and Standby mode. MUTE: Mute and restore TV sound. 0~9: + $#JQ^ JQ * : Enter multiple program channel number such as 2-1. : Return to the previous viewing channel. APP: Press to select the desired APP. MENU: Display the main menu.
CONNECTING EXTERNAL DEVICES En 9
CUSTOMIZING TV SETTINGS Initial Setup Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. The first time you turn the TV on, it will go into the Setup Wizard.
CUSTOMIZING TV SETTINGS Navigating the Setup Settings Press the MENU button to display the main menu. buttons to select Setup menu and then press Use and select the available menu.
CUSTOMIZING TV SETTINGS Apps Toon Goggles VUDU Press the MENU button on the main unit or on the remote control to display the to enter the streaming and use to select the desired Apps. Then press APP and press OK button to view. Or press the hotkey on the remote control to enter the APP directly. Pandora Toon Goggles Enjoys TV shows & movies streamed instantly over the Internet. Free personalized radio that offers effortless and endless music enjoyment and discovery.
CUSTOMIZING TV SETTINGS Media Press the MENU button on the main unit or on the remote control, then press to select Media, and use to enter the media and use to select the desired option. NOTE: Viewing Photos buttons to select Photos and then select the After entering Media, press disk type to enter. Then use / buttons to navigate in the picture folder to select the desired photo, then a subscreen will pop up.
CUSTOMIZING TV SETTINGS Playing Movie After entering Media, press buttons to select Mo ie and then select the disk type to enter. Then use / buttons to navigate in the movie folder to select the desired video, then a subscreen will pop up. Press O " } " to display the video. Playing Music music 1.mp3 guqin.mp3 music After entering Media, press buttons to select Music and then select the disk type to enter.
CUSTOMIZING TV SETTINGS Source Press the MENU button on the main unit or on the remote control and press buttons to select the Source menu. Then press to enter source,and use buttons to select different input sources among: TV/ HDMI1/ HDMI2/ HDMI3/ USB/ VGA/ AV/ Component and press OK button to Setup Press the MENU button on the main unit or on the remote control to display the to select Setup menu and press to enter. main interface. Then press Then press to select the desired option.
CUSTOMIZING TV SETTINGS System Wide Zoom Press buttons to select System menu and then press OK button to enter. Press buttons to select the following setting options and then press buttons to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Menu Language Transparency Zoom Mode Noise Reduction Advanced Closed Caption Select menu language : English, Français or Español. The default on-screen menu language is English. Select to turn On/Off transparency function. Select zoom mode : Standard/Wide/Wide Zoom/Zoom. Note: Different input source, the zoom mode options may differ. Reduce the noise level of the connected device: Off/ Weak/Middle/Strong. Adjust advanced option’s setting: H-POS, V-POS, Clock, Phase or Auto.
:+TOMIZING JQ +JJ=+ Channel buttons to Channel menu and then O button to enter buttons to select the following channel options and then ’ Air/Cable Auto Scan Show/Hide Channel Number Channel Label Signal Information + # : Select Auto Scan to search the available Air or :abl + ^? t c r.
COSTOMIZING TV SETTINGS Lock Press buttons to select ock menu and then press O button to enter. Use the 0-9 buttons to input 4-digit password to enter the ock menu. Press buttons to select the following lock options and then press buttons to adjust each option’s setting. Note: the default password is “0000”. Change Password System Lock USA Canada RRT Setting Use buttons to input the old password and then input the new 4-digit password.
CUSTOMIZING TV SETTINGS Picture Standard Press buttons to select Picture menu and then press O button to enter. Press buttons to select the following picture options and then press buttons to adjust each option’s setting. Picture Mode Blue Screen Brightness Contrast Color Sharpness Tint Color Temp Advanced Setting MEMC En 20 Cycle among picture mode: Dynamic/Movie/Energy Saving/User/Standard. Alternative: you may press the P.MODE button to select the picture mode directly.
COSTOMIZING TV SETTINGS Network THTF4KOTT-00000000000000000000 000100029265 Press buttons to select Net ork menu and then press O button to enter. buttons to select the following network options and then press Press buttons to adjust each option’s setting. Network Settings Network Status Deactivate Vudu Select two types of network: Wireless Network or Wired Network. Show the network status.
COSTOMIZING TV SETTINGS Re inder or internet connection Below occasions are possible while your internet is connected to enjoy your OTT services. 1.Please check your internet signal strength while internet is connected, signal strength below 50 may result bad connection and non-smooth picture. 2.To enter OTT services, 30 seconds may be required for internet connection. Reco ended M a o e internet s eed Audio Press buttons to select Audio menu and then press O button to enter.
PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
PARENTAL CONTROL Motion Picture Association of America (MPAA) Rating System G PG Grade General Audiences Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Ratin No children under age 17 Hard Core Films No Rating Meanin Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV may freeze up during use. Disconnect the power cord from the power socket for a few minutes.
The audio function does not work Picture OK but no sound Press the VOL +/- buttons. Sound muted? Press the MUTE button. Try another channel. The problem may be caused by the broadcaster. No output from one of the speakers Adjust the Balance settings in the AUDIO menu. Unusual sound from inside the TV A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Response Time (G To G) Lamp Life (Typ.
OTT APP SERVICE If you want to know about these APP information or get more service. Please refer to following content. t Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. t YouTube You can browse the following website for more help: https://productforums.google.
SE-UM-6501 -1601