user manual Dishwasher WDF902
westinghouse Electrolux. Thinking of you. Westinghouse. We are part of the Electrolux family. Share more of our thinking at www.electrolux.
westinghouse 3 Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
westinghouse Product description 9 1 Upper basket 2 Air vent and water hardness dial (the dial is only functional for dishwashers with a water softener) 3 Detergent dispenser 4 Rinse aid dispenser 5 6 7 8 9 Rating plate Filters Lower spray arm Upper spray arm Worktop
westinghouse 5 Control panel 1 2 3 4 5 6 7 8 On/off button (POWER) Program selection button (PROGRAM) Delay start button (DELAY) Start and Button lock button (START) Start indicator light Indicator lights Digital display Program indicator lights Indicator lights Button LOCK The indicator light comes on when the button lock function is active. Rinse Aid The indicator light comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'.
westinghouse Important! It is not possible to deactivate the Button lock function while a delay or washing program is in progress. To do this you must cancel the set program. Refer to 'Select and start a washing program'. The appliance must be in setting mode to set a washing program. If a program indicator light is on, cancel the program to go back to the setting mode. Refer to 'Select and start a washing program'.
westinghouse 7 Turn the rinse aid dial to increase or decrease the dosage. – Increase the dosage if there are water droplets or limescale on the dishes. – Decrease the dosage if there are streaks, whitish stains or bluish layers on the dishes. Wash hands to remove any residue of rinse aid from skin. Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are suitable for dishwashers.
westinghouse Cutlery basket Warning! Do not put long-bladed knives in a vertical position. Arrange long and sharp cutlery horizontally in the upper basket. Be careful with sharp items. Put plates only in the rear part of the upper basket. Tilt them forward. Put glasses with long stems in the cup racks with the stems up. For longer items, fold the cup racks up. Use the cutlery grid for best washing results. If the dimensions of the cutlery prevent the use of the cutlery grid, you can remove it.
westinghouse 9 Do these steps to move the upper basket to the lower position: 1. Pull the basket out until it stops. 2. Carefully lift the two sides upwards. 3. Hold the mechanism and guide it back down slowly. Caution! • Do not lift or lower the basket on one side only. • If the basket is in the upper position, do not put cups on the cup racks. Use of detergent Only use detergents (powder, liquid or tablet) that are suitable for dishwashers.
westinghouse Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programs. Use long washing programs when you use detergent tablets to fully remove the detergent. Use of combi detergent tablets These products are detergents with a combined cleaning and rinsing functions. They can contain also other cleaning agents. Refer to the instructions from the manufacturer for the use of these products.
westinghouse 11 Select and start a washing program 1. Close the appliance door. 2. Press the on/off button. 3. Make sure that the appliance is in setting mode. 4. Press one of the program buttons. Refer to the 'Washing programs' chart for program details. – The indicator light of the selected program stays on. All other program indicator lights go off. – The start indicator light flashes. – The flashing digital display shows the program duration. 5. Press the start button.
westinghouse Washing programs Washing programs Program Degree of soil Type of load Program description RINSE Any partial load (to be completed later in the day). 1 cold rinse (to prevent food scraps to bond). Detergent is not necessary with this program.
westinghouse 13 Care and cleaning Warning! Switch the appliance off before you clean it. Cleaning the filters Caution! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance. 5. Hold the coarse filter (A) by the handle with the hole. 6. Remove the coarse filter from the microfilter. 7. Remove the flat filter (C) from the bottom of the appliance.
westinghouse 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Keep the door open to prevent unpleasant smells. 4. Keep the inner side of the appliance clean. Frost precautions Caution! Do not install the appliance where the temperature is below 0 °C. The manufacturer is not responsible for damage because of frost. If not possible, empty the appliance and close the door. Disconnect the water inlet hose and remove water from the water inlet hose.
westinghouse 15 The cleaning results are not satisfactory The dishes are not clean • The selected washing program is not applicable for the type of load and soil. • The baskets are loaded incorrectly so that water cannot reach all surfaces. • Spray arms do not turn freely because of incorrect arrangement of the load. • The filters are dirty or not correctly installed. • The quantity of detergent is too little or missing. The dishes are wet and dull • No rinse aid has been used.
westinghouse 2. Pull the worktop behind the appliance (2). 4. Level of the appliance using the adjustable feet. 5. Install the appliance under the kitchen worktop. Ensure that water hoses are not kinked or squashed. The appliance must be easily accessible to the technician if a repair is necessary. 3. Lift the worktop and move it from the front slots (3). Adjusting the level of the appliance Make sure that the appliance is level to close and seal the door correctly.
westinghouse 17 Ensure that hoses are not crushed or kinked under or behind the appliance. The appliance has a security feature to prevent dirty water going back into the appliance. If, the spigot of the sink has a 'non-return valve', this valve can cause the appliance to drain incorrectly. Remove the non-return valve. Caution! Make sure that the water couplings are tight to prevent water leakage. Once connected the inlet hose to the water tap, turn the tap on and check that there are no leaks.
westinghouse household waste disposal service or the shop where you purchased the appliance. Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: AEG-ELECTROLUX This document sets out the terms and conditions of product warranties for Electrolux branded appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Electrolux appliance. General Terms and Conditions 1.
westinghouse 19 – The Appliance is damaged by i) accident ii) misuse or abuse, including failure to properly maintain or service iii) normal wear and tear iv) power surges, electrical storm damage or incorrect power supply v) incomplete or improper installation vi) incorrect, improper or inappropriate operation vii) insect or vermin infestation. – The Appliance is modified without authority from Electrolux in writing. – The Appliance's serial number or warranty seal has been removed or defaced.
westinghouse FOR SERVICE OR TO FIND THE ADDRESS OF YOUR NEAREST AUTHORISED SERVICE CENTRE IN NEW ZEALAND Free call 0800 10 66 10 (New Zealand only) SERVICE NEW ZEALAND FOR SPARE PARTS OR TO FIND THE ADDRESS OF ELECTROLUX HOME PROD- YOUR NEAREST SPARE UCTS PARTS CENTRE IN NEW ZEALAND www.electrolux.co.
westinghouse 21
westinghouse
westinghouse 23
www.electrolux.com www.westinghouse.com.