user manual Dishwasher WDU903
westinghouse Electrolux. Thinking of you. Westinghouse. We are part of the Electrolux family. Share more of our thinking at www.electrolux.
westinghouse 3 • Keep all detergents in a safe area. Do not let children touch the detergents. • Keep the children and pets away from the appliance when the door is open. Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation.
westinghouse Product description 9 1 Ceiling spray arm 2 Upper basket 3 Air vent and water hardness dial (the dial is only functional for dishwashers with a water softener) 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm Internal light This appliance has an internal light that comes on when you open the door and goes off when the door is closed. Warning! Visible led radiation, do not stare into the beam.
westinghouse 5 Control panel 1 2 3 4 5 6 7 8 On/off button (POWER) Program selection button (PROGRAM) Delay start button (DELAY) Start and Button lock button (START) Start indicator light Indicator lights Digital display Program indicator lights Indicator lights Button LOCK Comes on when the button lock function is active. Rinse Aid Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'. The indicator light is off while a washing program operates.
westinghouse closing the door or switching off the appliance. Important! It is not possible to deactivate the Button lock function while a washing program is in progress. To do this you must cancel the set program. Refer to 'Select and start a washing program'. The appliance must be in setting mode to set a washing program. If a program indicator light is on, cancel the program to go back to the setting mode. Refer to 'Select and start a washing program'.
westinghouse 7 Turn the rinse aid dial to increase or decrease the dosage. – Increase the dosage if there are water droplets or limescale on the dishes. – Decrease the dosage if there are streaks, whitish stains or bluish layers on the dishes. Wash hands to remove any residue of rinse aid from skin. Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are suitable for dishwashers.
westinghouse The rows of prongs in the lower basket can be adjusted flat to load pots, pans and bowls. Mix spoons with other cutlery to prevent them nesting together. Upper basket The upper basket is for saucers, salad bowls, cups, glasses and lids. Arrange the items to let water touch all surfaces. Cutlery basket Warning! Do not put long-bladed knives in a vertical position. Arrange long and sharp cutlery horizontally in the upper basket. Be careful with sharp items.
westinghouse 9 Adjustment of the height of the upper basket If you put large plates in the lower basket, first move the upper basket to the upper position. Maximum height of the dishes in the lower basket Upper position 31 cm Lower position 27 cm Follow these steps to move the upper basket to the upper position: 1. Pull the basket out until it stops. 2. Carefully lift the two sides until the mechanism is engaged and the basket is stable.
westinghouse 5. Close the lid of the detergent dispenser. Press the lid until it locks into position. A B 3. If you use a washing program with prewash, put more detergent in the prewash detergent compartment (B). 4. If you use detergent tablets, put the detergent tablet in the detergent dispenser (A) . Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programs.
westinghouse 11 Select and start a washing program 1. Close the appliance door. 2. Press the on/off button. 3. Make sure that the appliance is in setting mode. 4. Press one of the program buttons. Refer to the 'Washing programs' chart for program details. – The indicator light of the selected program stays on. All other program indicator lights go off. – The start indicator light flashes. – The flashing digital display shows the program duration. 5. Press the start button.
westinghouse Washing programs Washing programs Program Degree of soil Type of load Program description RINSE Any Partial load (to be completed later in the day). 1 cold rinse (to prevent food scraps to bond). Detergent is not necessary with this program.
westinghouse 13 Care and cleaning Warning! Switch the appliance off before you clean it. Cleaning the filters Caution! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance. 4. Remove the filter system. 5. Hold the coarse filter (A) by the handle with the hole. 6. Remove the coarse filter from the microfilter. 7.
westinghouse Long periods of non-operation Do these steps when you do not use the appliance for a long period: 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Keep the door open to prevent unpleasant smells. 4. Keep the inner side of the appliance clean. Frost precautions Caution! Do not install the appliance where the temperature is below 0 °C. The manufacturer is not responsible for damage because of frost. If not possible, empty the appliance and close the door.
westinghouse 15 • Model (Mod.) • Product number (PNC) • Serial number (S.N.) For these data, refer to the rating plate. Write the necessary data here: Model description : .......... Product number : .......... Serial number : .......... The cleaning results are not satisfactory The dishes are not clean • The selected washing program is not applicable for the type of load and soil. • The baskets are loaded incorrectly so that water cannot reach all surfaces.
westinghouse Installation There should be a minimum 2mm gap between the top of the dishwasher and underside of bench top The hose s hould not be extended by more than 2 metres or water pumpout problems ma y occu r Fix drain hose max of 10mm below the top of the dishwashe r Remove entire plastic membrane from sink trap spigot & fit drain hose to spigot with clamp Secure dishwasher with brackets and screws provided 600mm max. 300mm min.
westinghouse 17 3. Adjust the rear foot. Turn the screw in the middle of the front kick-plate to the left or to the right. Make sure that the appliance is level to close and seal the door correctly. If the level of the appliance is correct, the door does not catch on the sides of the cabinet. Loosen or tighten the adjustable feet until the appliance is level. 1. Fit the supplied angular brackets in the slots on the top of the appliance. 2.
westinghouse the kick-panel, trim to prevent interference. • Attach the kick-panel to adjacent cabinets so that if service is necessary you can remove it. Water connection Water inlet hose Connect the appliance to a cold water supply. Connect the inlet hose to a water tap with an external BSP thread spout of 3/4”. Inlet water supply • Cold water pressure: 800 kPa max - 50 kPa min. • Water flow rate 10 L / minute min.
westinghouse 19 The drain hose can be lengthened using additional lengths and connectors. These must be purchased from Electrolux Spare Parts. The extension length must not exceed 2 metres. The drain hose must be free of kinks and obstructions. Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance. If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane.
westinghouse Warning! To discard the appliance, follow the procedure: • Pull the mains plug out of the socket. • Cut off the mains cable and mains plug and discard them. • Discard the door catch. This prevents children closing themselves inside the appliance and endangering their lives. Make sure that this appliance is discarded correctly. Inappropriate waste discard of the appliance causes negative consequences for the environment and human health.
westinghouse 21 7. 8. 9. 10. in Australia, or 0800 10 66 10 in New Zealand. Proof of purchase is required before you can make a claim under this warranty. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship.
westinghouse FOR SERVICE SERVICE AUSTRALIA OR TO FIND THE ADDRESS OF YOUR NEAREST STATE SERVELECTROLUX HOME PRODICE CENTRE IN AUSTRALIA UCTS Please call 13 13 4 9 For the cost of a local call (Australia only) FOR SPARE PARTS OR TO FIND THE ADDRESS OF YOUR NEAREST STATE SPARE PARTS CENTRE IN AUSTRALIA Please call 13 13 50 For the cost of a local call (Australia only) FOR SERVICE SERVICE NEW ZEALAND OR TO FIND THE ADDRESS OF YOUR NEAREST AUTHORISED ELECTROLUX HOME PRODSERVICE CENTRE IN NEW UCTS ZEALAND F
westinghouse 23
www.electrolux.com www.westinghouse.com.
