NCCO Air Treatment Unit Operation Manual Model: WH50P WARRANTY CARD ATTACHED Thank you for choosing Westinghouse NCCO Air Treatment Unit. Before using and maintaining this appliance, please read this manual carefully and thoroughly. Please read the "Safety Instructions" carefully before using this appliance. Failure to follow the instructions to use this appliance may result in injury or property damage. Please keep this manual in a safe place for future reference.
Please Follow Instructions Below Safety Instructions ■Before using the appliance, please read the safety and operation instructions carefully and thoroughly. ■This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
■ When any of the following situations occur, please stop operating the unit and disconnect the power supply immediately. (Otherwise, it may lead to electric shock, fire or smoke.) · When the power line is moved, the unit stops operating. · If any control button fails. · If the circuit breaker works or the fuse burns out. · If the power line or plug is unusually hot. · If you notice burning odour or abnormal sound or vibration. · If there are any other abnormal phenomena or faults.
Basic Information Main Parts & Components Illustration Diagram: NCCO Reactor E HEPA Filter Frame Pre-filter B C Control Panel F G Back Cover H 1. Remove all packaging materials, use a soft dry cloth to clean all the parts then re-assemble parts back together. 2. Place the unit on a dry, solid, level surface, and ensure the unit is provided with reasonable space of at least 15 cm from any objects, in order to operate effectively. 3.
Getting Started Operating Instructions 4 Getting Started Operating Instructions 2. Default Air Speed& Memory Function First, align the four pins on the Front Cover with the four holes on the unit. Then, slightly push the Front Cover, the magnetic parts will attract the Front Cover towards to unit body. The installation of Front Cover is completed. ATTENTION Please make sure all the Filters are fully installed. Default Setting: The default air speed is at ‘03’.
Operating Instructions Getting Started 5. ECO Mode Press the Eco Button to enter into Eco Mode and press one more time to exit Eco Mode. It is recommended to select Eco Mode during sleep time. 6. Lock Mode When the unit is running, simultaneously press the ON / OFF Button and Eco Mode Button for 5 seconds, where there is crystal ring coming from the unit and the Lock Mode icon is illuminated. At that time, the unit enters into Lock Mode.
Filter Replacement & Maintenance Care & Maintenance 1. The lifetime of the filter will vary depending on the environment, amount of usage and location of the unit. 2. To maintain optimal operating condition of the unit, only use the recommended filter. 3. It is recommended to clean Pre-filter regularly. 4. When replacing filters, please keep unit running. 5. Please follow HEPA Filter Surface Color Changing Indicator to dispose HEPA Filter.
Trouble Shooting Problems The unit does not operate. ‘EE’ is displaying on Display Screen, the unit is not operating and making ‘DiDi·DiDi’ sound. No air is blowing through air outlet. The air quality has not improved after a long operation time. Other Information Solutions Check if the unit is correctly connected to its power supply. Turn on the unit. Check if the filters have been correctly installed. Re-install all filters. Check if the unit is correctly connected to its power supply.
