Use and Care Manual

07 08

1. Power Button

Increase Speed: Press the Increase Speed button, and each click will increase the fan speed.

When the air speed is at ‘10’, simultaneously press the Air Speed Increase Button and Air

Speed Reduce Button to enter into ‘SS’ Mode.

It is recommended to select ‘SS’ mode to treat seriously contaminated area in a short period

of time.

Exit the ‘SS’ Mode: Press the Air Speed Reduce Button to switch into Air Speed Mode with air

speed at ‘10’.

4. Turbo Mode

ON: Sound should be heard indicating Power On after the unit has been connected with

power supply. Press ON / OFF Button to turn on unit.

OFF: Press ON / OFF Button again to turn oﬀ unit.

Note: When the unit is running, long press the button to reset WIFI Mode.

Default Setting: The default air speed is at ‘03’. Every time the unit got disconnected from power

supply, when it’s turned back on, the air speed will be reset to default value.

Memory Function: If user presses the ON / OFF Button to turn oﬀ the unit and then turns it

back on, the unit would remain the same operation status as last usage.

2. Default Air Speed& Memory Function

3. Fan Speed Mode

Reduce Speed: Press the Reduce Speed button, and each click will reduce the fan speed.

Getting Started Getting Started

Please make sure all the Filters are fully installed.

ATTENTION

Increase Speed Reduce Speed

Operating Instructions Operating Instructions

Control Panel Buttons:

First, align the four pins on the Front Cover with the four holes on the unit. Then, slightly push the

Front Cover, the magnetic parts will attract the Front Cover towards to unit body. The installation

of Front Cover is completed.

*Unit supports 2.4Ghz / 5Ghz Wiﬁ. If there is any connection problem, please contact your router

supplier for problem solution.

Display Screen

Air Speed

Reduce Button

Air Speed

Increase Button

Eco Mode

Button

ON / OFF

Button