User Manual

41INSTALLATION OF THE APPLIANCE
Freestanding installation
Cabinet construction for freestanding installation
The freestanding type installation requires four screw-in
feet to be installed before it can be fitted in between
cabinets, with cabinets on one side or without adjacent
cabinets. There is no clearance requirement to adjacent
side cabinets.
To ensure cooker stability, the anti-tilt brackets must be
installed.
Four screw-in feet are supplied with the appliance and
can be found in the accessories pack in the oven.
WFE914SC, WFE946SC and WFEP915SC are supplied
with a clip-on kick panel.
900mm minimum
755mm NOM
900mm NOM
600mm
both sides