Operating Instructions

39
INSTALLATION
SLOT-IN INSTALLATION
INSTALLATION OF THE APPLIANCE
TO REMOVE THE APPLIANCE KICK PANEL
• Removeallloosepartsie.Burnercrowns&caps,
trivets,ovenshelves
• Carefullylaydowntheapplianceontoonesideonto
foampackagingandremovethescrewsasshown
fromeachcornerbracket
• Oncethekickpanelisremoved,fitremovedscrews
backontotheapplianceinthesamelocations.
Remove 4 screws on
each corner bracket
SLOT IN CONVERSION
Toconverttheapplianceforslotininstallationthekickpanel
providedontheapplianceisremovedandtheapplianceis
mountedonaplinth.Thisenablesacontinuouscupboard
kickboardtobeinstalled,givingamoreintegrated
appearance.Thereisnoclearancerequirementbetween
ovenandadjacentsidecabinets.
This surface is to be level
with the top edge of the kickboard
600mm minimum
vertical clearance
from combustible
surfaces
600mm
900mm minimum
755mm maximum
895mm
Remove4screwson
eachcornerbracket
600mmminimum
verticalclearance
fromcombustible
surfaces
600mm
755mmmax
900mmminimum
Thissurfaceistobelevelwith
thetopedgeofthekickboard