User's Manual

12 INSTALLATION OF THE APPLIANCE
Freestanding installation (continued)
WARNING
WARNING
• Appropriate fasteners must be used to suit the type
of wall on which the anti-tilt brackets are installed.
• Freestanding unit must be pushed up against
the wall on installation. On gas units check that
the gas hose, if used, has not been kinked during
installation.
4. The anti-tilt brackets must be secured to the
rear wall of the cavity with appropriate fasteners
according to dimensions in diagram.
Install anti-tilt brackets
in this orientation as
shown (fasteners not
supplied)
C
L
425
Anti-tilt bracket
installation
reference line
725
370 370
INSTALLATION OF THE APPLIANCE (CONTINUED)