Product Manual

Westinghouse Portable Power | 15
Smart Switch Outlet: Connects the
Westinghouse ST Switch (sold separately) to the
control panel.
Battery Charge Port: Used to charge the battery
when the unit is o (charger included).
Data Center: The VFT Meter is an LED display
that will rotate through volts, frequency, and
lifetime run hours. You can press the MODE
button to cycle through the dierent displays.
The frequency and voltage can vary +/- 5% and
still be within tolerance.
Frequency in hertz
Lifetime run hours
Voltage
Ground Terminal: The ground terminal is used to
ground the generator.
20-Amp Circuit Breakers: Each circuit breaker
limits the current that can be delivered through
the 120-volt duplex outlets to 20amps.
Fuel Selector Switch: Select and turn on gas or
propane.
Push Start Button:
• Push for 1 second to automatically start the
engine.
• Push for 1 second again to stop the engine.
Engine Control Switch/Battery Disconnect:
Switch to STOP to stop the engine. When in STOP
position it prevents the unit from drawing power
from the battery. Switch to RUN before starting
engine.
5V USB Ports: 5V DC that come in 1 amp and
2.1 amps.
Main Circuit Breaker: The main circuit breaker
controls total output of all outlets to protect the
generator.
120-Volt, 20-Amp Duplex GFCI Outlets
(NEMA 5-20R): Each outlet is capable of carrying
a maximum of 20 amps on a single receptacle or a
combination of both receptacles.
120/240-Volt, 30-Amp Twist Lock Outlet
(NEMA L14-30R): Outlet can supply either
120V or 240V output.
Battery Indicator Light: When light is illuminated,
the battery is on.
CONTROL PANEL FEATURES
1
8
9
10
11
12
13
2
3
4
5
6
7
3 4 5 6 721
10 11 13
9
8
FEATURES
12